TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-11-23 18:15:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated Audio Receivers (markdown)

Brumi-2021 2023-09-04 23:19:40 +02:00
parent 8665a0c284
commit bd1a9396d3
1 changed files with 8 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Audio-Receivers.md

@ -17,6 +17,13 @@ The Key Items on the App that can be seen or selected with the cursor and change
* **Frequency:** The Centre frequency of the demodulation band. * **Frequency:** The Centre frequency of the demodulation band.
> Note 1 : From Frequency field, you can move down to the below Step field , to adjust your best suitable Freq-step, according to your
needs.
> Note 2 : If you have load/save App Settings enabled, it will continue to use what it was last set at. And you can always edit the file in the SD card, /SETTINGS/tx_mic.ini and edit the step size there, according to your needs in that App.
> Note 3 : Additionally , to be more user friendly , from version 1.7.4+ holding in the Select button on the Frequency field for a second until a digit turns blue, then you can use Left/Right select which digit you'd like to adjust, and then you can use the Encoder Dial to adjust any digit up/down by 1 to tune more precisely. (Press Select again to exit this tuning mode.
* **Gain:** Settings are shown in order of LNA(IF) (0-40) and VGA (Baseband Gain) (0-62). When either of these are selected in the secondary line the AMP setting is shown and can be as either set to 0=0db or 1=14dB. * **Gain:** Settings are shown in order of LNA(IF) (0-40) and VGA (Baseband Gain) (0-62). When either of these are selected in the secondary line the AMP setting is shown and can be as either set to 0=0db or 1=14dB.
* **Signal Display:** The three coloured displays are top to bottom RSSI(Red/Blue) with an average marker in the line. Next is the Baseband signal and last the Audio level. * **Signal Display:** The three coloured displays are top to bottom RSSI(Red/Blue) with an average marker in the line. Next is the Baseband signal and last the Audio level.