Updated Hardware overview (markdown)

Erwin Ried 2020-05-14 13:11:52 +02:00
parent e7122e11de
commit c1715069d1

@ -5,8 +5,8 @@
1. Antenna (the connector is a _female SMA_, so the antenna needs to be _male SMA_, and not _RPSMA_) 1. Antenna (the connector is a _female SMA_, so the antenna needs to be _male SMA_, and not _RPSMA_)
2. Encoder thumb wheel (on the H1 has a different layout, but the same functionality), notice that pushing the wheel down has the same effect as pressing the center push button 2. Encoder thumb wheel (on the H1 has a different layout, but the same functionality), notice that pushing the wheel down has the same effect as pressing the center push button
3. Directional pushbuttons and Enter/ON/OFF in the center 3. Directional pushbuttons and Enter/ON/OFF in the center
4. CLK IN 4. [CLK IN](https://github.com/mossmann/hackrf/wiki/HackRF-One#external-clock-interface-clkin-and-clkout)
5. CLK OUT 5. [CLK OUT](https://github.com/mossmann/hackrf/wiki/HackRF-One#external-clock-interface-clkin-and-clkout)
6. Micro usb port and next to it, charging led indicator (in the H2, this might flicker while charging but will _mostly_ turn off when the battery is full) 6. Micro usb port and next to it, charging led indicator (in the H2, this might flicker while charging but will _mostly_ turn off when the battery is full)
7. Headset/Microphone (standard smartphone 4 segment 3.5mm connector) 7. Headset/Microphone (standard smartphone 4 segment 3.5mm connector)
8. Receive and transmit leds (indicates the current operation, since the HackRF is half-duplex, only one of this will be lit at every moment) 8. Receive and transmit leds (indicates the current operation, since the HackRF is half-duplex, only one of this will be lit at every moment)