mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-11-23 10:05:27 +00:00
Added RXIQCAL explanation
parent
a22faa6e65
commit
c3e194dfc0
@ -16,6 +16,8 @@ The frequency ranges are held in the SD card >LOOKINGGLASS>PRESETS.TXT. It shoul
|
||||
|
||||
* MARKER: If you place cursor over the field and turn the rotary encoder a red marker arrow will appear on top of the cascade so you can see approximate idea of the frequency for each pixel. The interval of the marker that is changed by the encoder knob, is shown and is based on the scan range. If you press the encoder know or Button then it will take you to the Audio App for more detailed view of the signal with setting of 1mHz Steps and a 10mHz view. Unfortunately, on return to the LOOKINGGLASS App the display goes to default settings.
|
||||
|
||||
* RXIQCAL: It actually can improve (8 to 10 dB's from worse Calibration point to the best one ) the receiver Image Reject Ratio (IRR). This CAL feature only is available in the Receiver Applications that are using Zero IF-frequency tuning ,like this Looking Glass and Audio SPECTRUM mode. This calibrated value will be stored in the SD card , /settings/rx_glass.ini. (A good default value is to use the central value 15/32 in max2837 (non r9 HackRF version devices) , 31/64 in max2839 (r9 HackRF versions ). (To see more more extended calibration details , pls check Audio App SPECTRUM wiki part)
|
||||
|
||||
* RES: The field can be changed by the rotary encoder to select the resolution (FFT Trigger point) (2-128). The default setting is 32. This allows the display to show better the Signals received and should be adjusted in conjunction with “Gain:” and “FILTER:”.
|
||||
|
||||
* STEPS: This field can be changed by the rotary encoder to select the step size used when moving the tuned window / when moving one of MIN/MAX.
|
||||
|
Loading…
Reference in New Issue
Block a user