From d6241f8aeb470c027cb56865b604b1e2b3c629e4 Mon Sep 17 00:00:00 2001
From: Kyle Reed <3761006+kallanreed@users.noreply.github.com>
Date: Fri, 8 Sep 2023 09:27:40 -0700
Subject: [PATCH] Updated POCSAG Receiver (markdown)

---
 POCSAG-Receiver.md | 1 +
 1 file changed, 1 insertion(+)

diff --git a/POCSAG-Receiver.md b/POCSAG-Receiver.md
index fc8b049..ade4923 100644
--- a/POCSAG-Receiver.md
+++ b/POCSAG-Receiver.md
@@ -14,6 +14,7 @@ More technical details can be found by following the links in the References sec
 - **RF amplifier** (0 or 1): Enables/disables the internal RF amplifier.
 - **LNA gain** (0, 8, 16, 24, 32, 40): Sets the LNA gain. Further information: [Description of the gain settings](Help!-Im-not-receiving-anything!---Receive-Quality-Issues#description-of-the-gain-settings)
 - **VGA gain** (0 to 62): Sets the VGA gain. Further information: [Description of the gain settings](Help!-Im-not-receiving-anything!---Receive-Quality-Issues#description-of-the-gain-settings)
+- **RSSI/Audio**: Top bar indicates signal strength. Bottom bar indicates the audio level. The audio bar can be useful for tuning settings without headphones/speaker to hear the tone.
 - **Squelch** (0-99): Sets the signal to noise threshold. 0 disables squelch. Higher values allow more noise. Should be set so that strong signals are clearly received without any dropped audio.
 - **Volume**: Output volume for the received audio. Can be used to monitor received signal quality.