TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-11-23 18:15:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

update latest CLK PR's information and some warning note.

Brumi-2021 2023-12-26 00:40:00 +01:00
parent 61c32ee3d2
commit e17e67d970
1 changed files with 11 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Settings.md

@ -3,8 +3,18 @@ This section provides a set of utilities that can be used to configure some aspe
This allow the setting of the tone Key mixer setting as a percent of the audio level.
## Radio
In the radio section there are two options,
1. Enable/disable the Clock Output. Note that you can change the CLKOUT frequency between 10 kHz to 60000 kHz; press OK when the frequency is highlighted to select which digit position to modify and then use the encoder to scroll through the digit values.
1. Enable/disable the Clock Output.
Note 1 : In r9 Hackrf platform , due to our complex fw Architecture and usage of Si5351A , we have fixed the synthetized CLK out freq to 10Mhz.
Note 2 : In all previous r1 to r8 Hackrf platforms , as we are using Si5351C, we do not have that limitation , and user can change the CLKOUT frequency between 4 kHz to 60000 kHz; press OK when the frequency is highlighted to select which digit position to modify and then use the encoder to scroll through the digit values. (it works with both clock references, the internal Hackrf (25Mhz) and the external from Portapack (TCXO 10Mhz ).
![image](https://github.com/eried/portapack-mayhem/assets/86470699/5c44e075-cf84-4f8f-8ca6-a7979c1bf4aa)
Warning note : be awared that most of current market Portapacks use to have a TCXO 10Mhz clock generator, and when is mounted, it is connected in parallel to the Hackrf CLK in . So in that case , that signal is present always in the SMA CLK in connector , and you should better to not connect any other external signal generator there (unless you remove the Portapack from Hackrf) , because you may damage that Portapack TCXO clock IC).
2. Enable/disable the Antenna Bias voltage. If enabled, ensure that all devices attached to the antenna connector can accept a DC bias voltage.
## User Interface
The UI interface setting for the following can be Enabled (tick) or Disabled (x) or selected value for the backlight timeout:
* Backlight off after 5 seconds( default) or can be set to 5,15,30 seconds or 1,3,5,10 minutes.