From ee0640107c1862c478102c90d6bf633175b951bc Mon Sep 17 00:00:00 2001 From: Si <32274981+sivaelid@users.noreply.github.com> Date: Sun, 27 Feb 2022 18:32:25 +0000 Subject: [PATCH] Updated Capture (markdown) --- Capture.md | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/Capture.md b/Capture.md index 3a6d4d7..632d84a 100644 --- a/Capture.md +++ b/Capture.md @@ -1,3 +1,19 @@ -Please check the video below for HackRF PortaPack Capture/Replay functionality, still based on Havoc firmware version. +Capture App is designed to capture I/Q data. This is is stored as pairs of 16-bit signed values in a .C16 file (Complex 16 bit) and are stored in little-endian format.The Metadata (“Center frequency” and Bandwidth) is stored in a .TXT file with the same name.In GRC, the "file source" and "ishort to complex" blocks can be used to process the data. -[![HackRF PortaPack Capture/Replay functionality](http://img.youtube.com/vi/Pe30Jvyhmzk/0.jpg)](http://www.youtube.com/watch?v=Pe30Jvyhmzk "HackRF PortaPack Capture/Replay functionality") \ No newline at end of file +The Sampling rate used may not be supported by some MicroSD cards, it is best to use high speed class SD cards. The HackRF PortaPack Capture/Replay functionalityis based on Havoc firmware version. + +The Key Items on the App that can be selected with the cursor and changed with the encoder knob are: + +* **Title bar:** The usual Items may be changed and displayed. +* **Frequency:** The setting of the frequency using the keypad can be completed +* **Step Size:** The selected step size of frequency adjustment carried out by the Rotary encoder. +* **Gain:** Amp (0dB or 14dB), LNA(IF) (0-40),VGA(Baseband)(0-62) +* **Rate:** The sample rate, which by its nature set the set bandwidth of capture. This is shown in the markers around the centre line of the waterfall display. The sample rate is variable from 8k5 to 2750K in 13 steps. You need to ensure that the sample rate is more than twice the bandwidth of the signal you want to capture see [(Nyquist Principle / also called Shannon’s Law) ](https://en.wikipedia.org/wiki/Nyquist%E2%80%93Shannon_sampling_theorem) +* **Record Button:** The red button shows as Rec or Stop. If record is selected then it will record the I/Q file. To the side of the Record Button is additional information that is shown for the recording file. + + * File Name + * % of the Storge capacity available + * Total time left + + +Please check the video below for HackRF PortaPack Capture/Replay functionality. [![HackRF PortaPack Capture/Replay functionality](http://img.youtube.com/vi/Pe30Jvyhmzk/0.jpg)](http://www.youtube.com/watch?v=Pe30Jvyhmzk "HackRF PortaPack Capture/Replay functionality") \ No newline at end of file