TheArchive/session-android
1
0
Fork 0
mirror of https://github.com/oxen-io/session-android.git synced 2024-12-04 23:45:14 +00:00
Code Issues Packages Projects Releases Wiki Activity
40332f57ad
session-android/jni/openssl/crypto/sha/asm/sha1-x86_64.pl

1262 lines
30 KiB
Perl
Raw Normal View History

Support for Signal calls. Merge in RedPhone // FREEBIE
2015-09-09 20:54:29 +00:00
#!/usr/bin/env perl
#
# ====================================================================
# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# sha1_block procedure for x86_64.
#
# It was brought to my attention that on EM64T compiler-generated code
# was far behind 32-bit assembler implementation. This is unlike on
# Opteron where compiler-generated code was only 15% behind 32-bit
# assembler, which originally made it hard to motivate the effort.
# There was suggestion to mechanically translate 32-bit code, but I
# dismissed it, reasoning that x86_64 offers enough register bank
# capacity to fully utilize SHA-1 parallelism. Therefore this fresh
# implementation:-) However! While 64-bit code does perform better
# on Opteron, I failed to beat 32-bit assembler on EM64T core. Well,
# x86_64 does offer larger *addressable* bank, but out-of-order core
# reaches for even more registers through dynamic aliasing, and EM64T
# core must have managed to run-time optimize even 32-bit code just as
# good as 64-bit one. Performance improvement is summarized in the
# following table:
#
# gcc 3.4 32-bit asm cycles/byte
# Opteron +45% +20% 6.8
# Xeon P4 +65% +0% 9.9
# Core2 +60% +10% 7.0
# August 2009.
#
# The code was revised to minimize code size and to maximize
# "distance" between instructions producing input to 'lea'
# instruction and the 'lea' instruction itself, which is essential
# for Intel Atom core.
# October 2010.
#
# Add SSSE3, Supplemental[!] SSE3, implementation. The idea behind it
# is to offload message schedule denoted by Wt in NIST specification,
# or Xupdate in OpenSSL source, to SIMD unit. See sha1-586.pl module
# for background and implementation details. The only difference from
# 32-bit code is that 64-bit code doesn't have to spill @X[] elements
# to free temporary registers.
# April 2011.
#
# Add AVX code path. See sha1-586.pl for further information.
######################################################################
# Current performance is summarized in following table. Numbers are
# CPU clock cycles spent to process single byte (less is better).
#
# x86_64 SSSE3 AVX
# P4 9.8 -
# Opteron 6.6 -
# Core2 6.7 6.1/+10% -
# Atom 11.0 9.7/+13% -
# Westmere 7.1 5.6/+27% -
# Sandy Bridge 7.9 6.3/+25% 5.2/+51%
$flavour = shift;
$output = shift;
if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
$avx=1 if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
=~ /GNU assembler version ([2-9]\.[0-9]+)/ &&
$1>=2.19);
$avx=1 if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
`nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)/ &&
$1>=2.09);
$avx=1 if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
`ml64 2>&1` =~ /Version ([0-9]+)\./ &&
$1>=10);
open OUT,"| \"$^X\" $xlate $flavour $output";
*STDOUT=*OUT;
$ctx="%rdi"; # 1st arg
$inp="%rsi"; # 2nd arg
$num="%rdx"; # 3rd arg
# reassign arguments in order to produce more compact code
$ctx="%r8";
$inp="%r9";
$num="%r10";
$t0="%eax";
$t1="%ebx";
$t2="%ecx";
@xi=("%edx","%ebp");
$A="%esi";
$B="%edi";
$C="%r11d";
$D="%r12d";
$E="%r13d";
@V=($A,$B,$C,$D,$E);
sub BODY_00_19 {
my ($i,$a,$b,$c,$d,$e)=@_;
my $j=$i+1;
$code.=<<___ if ($i==0);
mov `4*$i`($inp),$xi[0]
bswap $xi[0]
mov $xi[0],`4*$i`(%rsp)
___
$code.=<<___ if ($i<15);
mov $c,$t0
mov `4*$j`($inp),$xi[1]
mov $a,$t2
xor $d,$t0
bswap $xi[1]
rol \$5,$t2
lea 0x5a827999($xi[0],$e),$e
and $b,$t0
mov $xi[1],`4*$j`(%rsp)
add $t2,$e
xor $d,$t0
rol \$30,$b
add $t0,$e
___
$code.=<<___ if ($i>=15);
mov `4*($j%16)`(%rsp),$xi[1]
mov $c,$t0
mov $a,$t2
xor `4*(($j+2)%16)`(%rsp),$xi[1]
xor $d,$t0
rol \$5,$t2
xor `4*(($j+8)%16)`(%rsp),$xi[1]
and $b,$t0
lea 0x5a827999($xi[0],$e),$e
xor `4*(($j+13)%16)`(%rsp),$xi[1]
xor $d,$t0
rol \$1,$xi[1]
add $t2,$e
rol \$30,$b
mov $xi[1],`4*($j%16)`(%rsp)
add $t0,$e
___
unshift(@xi,pop(@xi));
}
sub BODY_20_39 {
my ($i,$a,$b,$c,$d,$e)=@_;
my $j=$i+1;
my $K=($i<40)?0x6ed9eba1:0xca62c1d6;
$code.=<<___ if ($i<79);
mov `4*($j%16)`(%rsp),$xi[1]
mov $c,$t0
mov $a,$t2
xor `4*(($j+2)%16)`(%rsp),$xi[1]
xor $b,$t0
rol \$5,$t2
lea $K($xi[0],$e),$e
xor `4*(($j+8)%16)`(%rsp),$xi[1]
xor $d,$t0
add $t2,$e
xor `4*(($j+13)%16)`(%rsp),$xi[1]
rol \$30,$b
add $t0,$e
rol \$1,$xi[1]
___
$code.=<<___ if ($i<76);
mov $xi[1],`4*($j%16)`(%rsp)
___
$code.=<<___ if ($i==79);
mov $c,$t0
mov $a,$t2
xor $b,$t0
lea $K($xi[0],$e),$e
rol \$5,$t2
xor $d,$t0
add $t2,$e
rol \$30,$b
add $t0,$e
___
unshift(@xi,pop(@xi));
}
sub BODY_40_59 {
my ($i,$a,$b,$c,$d,$e)=@_;
my $j=$i+1;
$code.=<<___;
mov `4*($j%16)`(%rsp),$xi[1]
mov $c,$t0
mov $c,$t1
xor `4*(($j+2)%16)`(%rsp),$xi[1]
and $d,$t0
mov $a,$t2
xor `4*(($j+8)%16)`(%rsp),$xi[1]
xor $d,$t1
lea 0x8f1bbcdc($xi[0],$e),$e
rol \$5,$t2
xor `4*(($j+13)%16)`(%rsp),$xi[1]
add $t0,$e
and $b,$t1
rol \$1,$xi[1]
add $t1,$e
rol \$30,$b
mov $xi[1],`4*($j%16)`(%rsp)
add $t2,$e
___
unshift(@xi,pop(@xi));
}
$code.=<<___;
.text
.extern OPENSSL_ia32cap_P
.globl sha1_block_data_order
.type sha1_block_data_order,\@function,3
.align 16
sha1_block_data_order:
mov OPENSSL_ia32cap_P+0(%rip),%r9d
mov OPENSSL_ia32cap_P+4(%rip),%r8d
test \$`1<<9`,%r8d # check SSSE3 bit
jz .Lialu
___
$code.=<<___ if ($avx);
and \$`1<<28`,%r8d # mask AVX bit
and \$`1<<30`,%r9d # mask "Intel CPU" bit
or %r9d,%r8d
cmp \$`1<<28|1<<30`,%r8d
je _avx_shortcut
___
$code.=<<___;
jmp _ssse3_shortcut
.align 16
.Lialu:
push %rbx
push %rbp
push %r12
push %r13
mov %rsp,%r11
mov %rdi,$ctx # reassigned argument
sub \$`8+16*4`,%rsp
mov %rsi,$inp # reassigned argument
and \$-64,%rsp
mov %rdx,$num # reassigned argument
mov %r11,`16*4`(%rsp)
.Lprologue:
mov 0($ctx),$A
mov 4($ctx),$B
mov 8($ctx),$C
mov 12($ctx),$D
mov 16($ctx),$E
jmp .Lloop
.align 16
.Lloop:
___
for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
add 0($ctx),$A
add 4($ctx),$B
add 8($ctx),$C
add 12($ctx),$D
add 16($ctx),$E
mov $A,0($ctx)
mov $B,4($ctx)
mov $C,8($ctx)
mov $D,12($ctx)
mov $E,16($ctx)
sub \$1,$num
lea `16*4`($inp),$inp
jnz .Lloop
mov `16*4`(%rsp),%rsi
mov (%rsi),%r13
mov 8(%rsi),%r12
mov 16(%rsi),%rbp
mov 24(%rsi),%rbx
lea 32(%rsi),%rsp
.Lepilogue:
ret
.size sha1_block_data_order,.-sha1_block_data_order
___
{{{
my $Xi=4;
my @X=map("%xmm$_",(4..7,0..3));
my @Tx=map("%xmm$_",(8..10));
my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization
my @T=("%esi","%edi");
my $j=0;
my $K_XX_XX="%r11";
my $_rol=sub { &rol(@_) };
my $_ror=sub { &ror(@_) };
$code.=<<___;
.type sha1_block_data_order_ssse3,\@function,3
.align 16
sha1_block_data_order_ssse3:
_ssse3_shortcut:
push %rbx
push %rbp
push %r12
lea `-64-($win64?5*16:0)`(%rsp),%rsp
___
$code.=<<___ if ($win64);
movaps %xmm6,64+0(%rsp)
movaps %xmm7,64+16(%rsp)
movaps %xmm8,64+32(%rsp)
movaps %xmm9,64+48(%rsp)
movaps %xmm10,64+64(%rsp)
.Lprologue_ssse3:
___
$code.=<<___;
mov %rdi,$ctx # reassigned argument
mov %rsi,$inp # reassigned argument
mov %rdx,$num # reassigned argument
shl \$6,$num
add $inp,$num
lea K_XX_XX(%rip),$K_XX_XX
mov 0($ctx),$A # load context
mov 4($ctx),$B
mov 8($ctx),$C
mov 12($ctx),$D
mov $B,@T[0] # magic seed
mov 16($ctx),$E
movdqa 64($K_XX_XX),@X[2] # pbswap mask
movdqa 0($K_XX_XX),@Tx[1] # K_00_19
movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
movdqu 16($inp),@X[-3&7]
movdqu 32($inp),@X[-2&7]
movdqu 48($inp),@X[-1&7]
pshufb @X[2],@X[-4&7] # byte swap
add \$64,$inp
pshufb @X[2],@X[-3&7]
pshufb @X[2],@X[-2&7]
pshufb @X[2],@X[-1&7]
paddd @Tx[1],@X[-4&7] # add K_00_19
paddd @Tx[1],@X[-3&7]
paddd @Tx[1],@X[-2&7]
movdqa @X[-4&7],0(%rsp) # X[]+K xfer to IALU
psubd @Tx[1],@X[-4&7] # restore X[]
movdqa @X[-3&7],16(%rsp)
psubd @Tx[1],@X[-3&7]
movdqa @X[-2&7],32(%rsp)
psubd @Tx[1],@X[-2&7]
jmp .Loop_ssse3
___
sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm
{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://;
my $arg = pop;
$arg = "\$$arg" if ($arg*1 eq $arg);
$code .= "\t$opcode\t".join(',',$arg,reverse @_)."\n";
}
sub Xupdate_ssse3_16_31() # recall that $Xi starts wtih 4
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
my ($a,$b,$c,$d,$e);
&movdqa (@X[0],@X[-3&7]);
eval(shift(@insns));
eval(shift(@insns));
&movdqa (@Tx[0],@X[-1&7]);
&palignr(@X[0],@X[-4&7],8); # compose "X[-14]" in "X[0]"
eval(shift(@insns));
eval(shift(@insns));
&paddd (@Tx[1],@X[-1&7]);
eval(shift(@insns));
eval(shift(@insns));
&psrldq (@Tx[0],4); # "X[-3]", 3 dwords
eval(shift(@insns));
eval(shift(@insns));
&pxor (@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
eval(shift(@insns));
eval(shift(@insns));
&pxor (@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&pxor (@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]"
eval(shift(@insns));
eval(shift(@insns));
&movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
eval(shift(@insns));
eval(shift(@insns));
&movdqa (@Tx[2],@X[0]);
&movdqa (@Tx[0],@X[0]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&pslldq (@Tx[2],12); # "X[0]"<<96, extract one dword
&paddd (@X[0],@X[0]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&psrld (@Tx[0],31);
eval(shift(@insns));
eval(shift(@insns));
&movdqa (@Tx[1],@Tx[2]);
eval(shift(@insns));
eval(shift(@insns));
&psrld (@Tx[2],30);
&por (@X[0],@Tx[0]); # "X[0]"<<<=1
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&pslld (@Tx[1],2);
&pxor (@X[0],@Tx[2]);
eval(shift(@insns));
eval(shift(@insns));
&movdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX
eval(shift(@insns));
eval(shift(@insns));
&pxor (@X[0],@Tx[1]); # "X[0]"^=("X[0]">>96)<<<2
foreach (@insns) { eval; } # remaining instructions [if any]
$Xi++; push(@X,shift(@X)); # "rotate" X[]
push(@Tx,shift(@Tx));
}
sub Xupdate_ssse3_32_79()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
my ($a,$b,$c,$d,$e);
&movdqa (@Tx[0],@X[-1&7]) if ($Xi==8);
eval(shift(@insns)); # body_20_39
&pxor (@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
&palignr(@Tx[0],@X[-2&7],8); # compose "X[-6]"
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
&pxor (@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
eval(shift(@insns));
eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/);
if ($Xi%5) {
&movdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX...
} else { # ... or load next one
&movdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)");
}
&paddd (@Tx[1],@X[-1&7]);
eval(shift(@insns)); # ror
eval(shift(@insns));
&pxor (@X[0],@Tx[0]); # "X[0]"^="X[-6]"
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
&movdqa (@Tx[0],@X[0]);
&movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # ror
eval(shift(@insns));
&pslld (@X[0],2);
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
&psrld (@Tx[0],30);
eval(shift(@insns));
eval(shift(@insns)); # rol
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # ror
eval(shift(@insns));
&por (@X[0],@Tx[0]); # "X[0]"<<<=2
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
&movdqa (@Tx[1],@X[0]) if ($Xi<19);
eval(shift(@insns));
eval(shift(@insns)); # rol
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
eval(shift(@insns));
foreach (@insns) { eval; } # remaining instructions
$Xi++; push(@X,shift(@X)); # "rotate" X[]
push(@Tx,shift(@Tx));
}
sub Xuplast_ssse3_80()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
my ($a,$b,$c,$d,$e);
eval(shift(@insns));
&paddd (@Tx[1],@X[-1&7]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU
foreach (@insns) { eval; } # remaining instructions
&cmp ($inp,$num);
&je (".Ldone_ssse3");
unshift(@Tx,pop(@Tx));
&movdqa (@X[2],"64($K_XX_XX)"); # pbswap mask
&movdqa (@Tx[1],"0($K_XX_XX)"); # K_00_19
&movdqu (@X[-4&7],"0($inp)"); # load input
&movdqu (@X[-3&7],"16($inp)");
&movdqu (@X[-2&7],"32($inp)");
&movdqu (@X[-1&7],"48($inp)");
&pshufb (@X[-4&7],@X[2]); # byte swap
&add ($inp,64);
$Xi=0;
}
sub Xloop_ssse3()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
my ($a,$b,$c,$d,$e);
eval(shift(@insns));
eval(shift(@insns));
&pshufb (@X[($Xi-3)&7],@X[2]);
eval(shift(@insns));
eval(shift(@insns));
&paddd (@X[($Xi-4)&7],@Tx[1]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&movdqa (eval(16*$Xi)."(%rsp)",@X[($Xi-4)&7]); # X[]+K xfer to IALU
eval(shift(@insns));
eval(shift(@insns));
&psubd (@X[($Xi-4)&7],@Tx[1]);
foreach (@insns) { eval; }
$Xi++;
}
sub Xtail_ssse3()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
my ($a,$b,$c,$d,$e);
foreach (@insns) { eval; }
}
sub body_00_19 () {
(
'($a,$b,$c,$d,$e)=@V;'.
'&add ($e,eval(4*($j&15))."(%rsp)");', # X[]+K xfer
'&xor ($c,$d);',
'&mov (@T[1],$a);', # $b in next round
'&$_rol ($a,5);',
'&and (@T[0],$c);', # ($b&($c^$d))
'&xor ($c,$d);', # restore $c
'&xor (@T[0],$d);',
'&add ($e,$a);',
'&$_ror ($b,$j?7:2);', # $b>>>2
'&add ($e,@T[0]);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));'
);
}
sub body_20_39 () {
(
'($a,$b,$c,$d,$e)=@V;'.
'&add ($e,eval(4*($j++&15))."(%rsp)");', # X[]+K xfer
'&xor (@T[0],$d);', # ($b^$d)
'&mov (@T[1],$a);', # $b in next round
'&$_rol ($a,5);',
'&xor (@T[0],$c);', # ($b^$d^$c)
'&add ($e,$a);',
'&$_ror ($b,7);', # $b>>>2
'&add ($e,@T[0]);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));'
);
}
sub body_40_59 () {
(
'($a,$b,$c,$d,$e)=@V;'.
'&mov (@T[1],$c);',
'&xor ($c,$d);',
'&add ($e,eval(4*($j++&15))."(%rsp)");', # X[]+K xfer
'&and (@T[1],$d);',
'&and (@T[0],$c);', # ($b&($c^$d))
'&$_ror ($b,7);', # $b>>>2
'&add ($e,@T[1]);',
'&mov (@T[1],$a);', # $b in next round
'&$_rol ($a,5);',
'&add ($e,@T[0]);',
'&xor ($c,$d);', # restore $c
'&add ($e,$a);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));'
);
}
$code.=<<___;
.align 16
.Loop_ssse3:
___
&Xupdate_ssse3_16_31(\&body_00_19);
&Xupdate_ssse3_16_31(\&body_00_19);
&Xupdate_ssse3_16_31(\&body_00_19);
&Xupdate_ssse3_16_31(\&body_00_19);
&Xupdate_ssse3_32_79(\&body_00_19);
&Xupdate_ssse3_32_79(\&body_20_39);
&Xupdate_ssse3_32_79(\&body_20_39);
&Xupdate_ssse3_32_79(\&body_20_39);
&Xupdate_ssse3_32_79(\&body_20_39);
&Xupdate_ssse3_32_79(\&body_20_39);
&Xupdate_ssse3_32_79(\&body_40_59);
&Xupdate_ssse3_32_79(\&body_40_59);
&Xupdate_ssse3_32_79(\&body_40_59);
&Xupdate_ssse3_32_79(\&body_40_59);
&Xupdate_ssse3_32_79(\&body_40_59);
&Xupdate_ssse3_32_79(\&body_20_39);
&Xuplast_ssse3_80(\&body_20_39); # can jump to "done"
$saved_j=$j; @saved_V=@V;
&Xloop_ssse3(\&body_20_39);
&Xloop_ssse3(\&body_20_39);
&Xloop_ssse3(\&body_20_39);
$code.=<<___;
add 0($ctx),$A # update context
add 4($ctx),@T[0]
add 8($ctx),$C
add 12($ctx),$D
mov $A,0($ctx)
add 16($ctx),$E
mov @T[0],4($ctx)
mov @T[0],$B # magic seed
mov $C,8($ctx)
mov $D,12($ctx)
mov $E,16($ctx)
jmp .Loop_ssse3
.align 16
.Ldone_ssse3:
___
$j=$saved_j; @V=@saved_V;
&Xtail_ssse3(\&body_20_39);
&Xtail_ssse3(\&body_20_39);
&Xtail_ssse3(\&body_20_39);
$code.=<<___;
add 0($ctx),$A # update context
add 4($ctx),@T[0]
add 8($ctx),$C
mov $A,0($ctx)
add 12($ctx),$D
mov @T[0],4($ctx)
add 16($ctx),$E
mov $C,8($ctx)
mov $D,12($ctx)
mov $E,16($ctx)
___
$code.=<<___ if ($win64);
movaps 64+0(%rsp),%xmm6
movaps 64+16(%rsp),%xmm7
movaps 64+32(%rsp),%xmm8
movaps 64+48(%rsp),%xmm9
movaps 64+64(%rsp),%xmm10
___
$code.=<<___;
lea `64+($win64?5*16:0)`(%rsp),%rsi
mov 0(%rsi),%r12
mov 8(%rsi),%rbp
mov 16(%rsi),%rbx
lea 24(%rsi),%rsp
.Lepilogue_ssse3:
ret
.size sha1_block_data_order_ssse3,.-sha1_block_data_order_ssse3
___
if ($avx) {
my $Xi=4;
my @X=map("%xmm$_",(4..7,0..3));
my @Tx=map("%xmm$_",(8..10));
my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization
my @T=("%esi","%edi");
my $j=0;
my $K_XX_XX="%r11";
my $_rol=sub { &shld(@_[0],@_) };
my $_ror=sub { &shrd(@_[0],@_) };
$code.=<<___;
.type sha1_block_data_order_avx,\@function,3
.align 16
sha1_block_data_order_avx:
_avx_shortcut:
push %rbx
push %rbp
push %r12
lea `-64-($win64?5*16:0)`(%rsp),%rsp
___
$code.=<<___ if ($win64);
movaps %xmm6,64+0(%rsp)
movaps %xmm7,64+16(%rsp)
movaps %xmm8,64+32(%rsp)
movaps %xmm9,64+48(%rsp)
movaps %xmm10,64+64(%rsp)
.Lprologue_avx:
___
$code.=<<___;
mov %rdi,$ctx # reassigned argument
mov %rsi,$inp # reassigned argument
mov %rdx,$num # reassigned argument
vzeroupper
shl \$6,$num
add $inp,$num
lea K_XX_XX(%rip),$K_XX_XX
mov 0($ctx),$A # load context
mov 4($ctx),$B
mov 8($ctx),$C
mov 12($ctx),$D
mov $B,@T[0] # magic seed
mov 16($ctx),$E
vmovdqa 64($K_XX_XX),@X[2] # pbswap mask
vmovdqa 0($K_XX_XX),@Tx[1] # K_00_19
vmovdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
vmovdqu 16($inp),@X[-3&7]
vmovdqu 32($inp),@X[-2&7]
vmovdqu 48($inp),@X[-1&7]
vpshufb @X[2],@X[-4&7],@X[-4&7] # byte swap
add \$64,$inp
vpshufb @X[2],@X[-3&7],@X[-3&7]
vpshufb @X[2],@X[-2&7],@X[-2&7]
vpshufb @X[2],@X[-1&7],@X[-1&7]
vpaddd @Tx[1],@X[-4&7],@X[0] # add K_00_19
vpaddd @Tx[1],@X[-3&7],@X[1]
vpaddd @Tx[1],@X[-2&7],@X[2]
vmovdqa @X[0],0(%rsp) # X[]+K xfer to IALU
vmovdqa @X[1],16(%rsp)
vmovdqa @X[2],32(%rsp)
jmp .Loop_avx
___
sub Xupdate_avx_16_31() # recall that $Xi starts wtih 4
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
my ($a,$b,$c,$d,$e);
eval(shift(@insns));
eval(shift(@insns));
&vpalignr(@X[0],@X[-3&7],@X[-4&7],8); # compose "X[-14]" in "X[0]"
eval(shift(@insns));
eval(shift(@insns));
&vpaddd (@Tx[1],@Tx[1],@X[-1&7]);
eval(shift(@insns));
eval(shift(@insns));
&vpsrldq(@Tx[0],@X[-1&7],4); # "X[-3]", 3 dwords
eval(shift(@insns));
eval(shift(@insns));
&vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
eval(shift(@insns));
eval(shift(@insns));
&vpxor (@Tx[0],@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]"
eval(shift(@insns));
eval(shift(@insns));
&vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
eval(shift(@insns));
eval(shift(@insns));
&vpsrld (@Tx[0],@X[0],31);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&vpslldq(@Tx[2],@X[0],12); # "X[0]"<<96, extract one dword
&vpaddd (@X[0],@X[0],@X[0]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&vpsrld (@Tx[1],@Tx[2],30);
&vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=1
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&vpslld (@Tx[2],@Tx[2],2);
&vpxor (@X[0],@X[0],@Tx[1]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&vpxor (@X[0],@X[0],@Tx[2]); # "X[0]"^=("X[0]">>96)<<<2
eval(shift(@insns));
eval(shift(@insns));
&vmovdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX
eval(shift(@insns));
eval(shift(@insns));
foreach (@insns) { eval; } # remaining instructions [if any]
$Xi++; push(@X,shift(@X)); # "rotate" X[]
push(@Tx,shift(@Tx));
}
sub Xupdate_avx_32_79()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
my ($a,$b,$c,$d,$e);
&vpalignr(@Tx[0],@X[-1&7],@X[-2&7],8); # compose "X[-6]"
&vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
&vpxor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
eval(shift(@insns));
eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/);
if ($Xi%5) {
&vmovdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX...
} else { # ... or load next one
&vmovdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)");
}
&vpaddd (@Tx[1],@Tx[1],@X[-1&7]);
eval(shift(@insns)); # ror
eval(shift(@insns));
&vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-6]"
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
&vpsrld (@Tx[0],@X[0],30);
&vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # ror
eval(shift(@insns));
&vpslld (@X[0],@X[0],2);
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # ror
eval(shift(@insns));
&vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=2
eval(shift(@insns)); # body_20_39
eval(shift(@insns));
&vmovdqa (@Tx[1],@X[0]) if ($Xi<19);
eval(shift(@insns));
eval(shift(@insns)); # rol
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns)); # rol
eval(shift(@insns));
foreach (@insns) { eval; } # remaining instructions
$Xi++; push(@X,shift(@X)); # "rotate" X[]
push(@Tx,shift(@Tx));
}
sub Xuplast_avx_80()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
my ($a,$b,$c,$d,$e);
eval(shift(@insns));
&vpaddd (@Tx[1],@Tx[1],@X[-1&7]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU
foreach (@insns) { eval; } # remaining instructions
&cmp ($inp,$num);
&je (".Ldone_avx");
unshift(@Tx,pop(@Tx));
&vmovdqa(@X[2],"64($K_XX_XX)"); # pbswap mask
&vmovdqa(@Tx[1],"0($K_XX_XX)"); # K_00_19
&vmovdqu(@X[-4&7],"0($inp)"); # load input
&vmovdqu(@X[-3&7],"16($inp)");
&vmovdqu(@X[-2&7],"32($inp)");
&vmovdqu(@X[-1&7],"48($inp)");
&vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap
&add ($inp,64);
$Xi=0;
}
sub Xloop_avx()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
my ($a,$b,$c,$d,$e);
eval(shift(@insns));
eval(shift(@insns));
&vpshufb(@X[($Xi-3)&7],@X[($Xi-3)&7],@X[2]);
eval(shift(@insns));
eval(shift(@insns));
&vpaddd (@X[$Xi&7],@X[($Xi-4)&7],@Tx[1]);
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
eval(shift(@insns));
&vmovdqa(eval(16*$Xi)."(%rsp)",@X[$Xi&7]); # X[]+K xfer to IALU
eval(shift(@insns));
eval(shift(@insns));
foreach (@insns) { eval; }
$Xi++;
}
sub Xtail_avx()
{ use integer;
my $body = shift;
my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
my ($a,$b,$c,$d,$e);
foreach (@insns) { eval; }
}
$code.=<<___;
.align 16
.Loop_avx:
___
&Xupdate_avx_16_31(\&body_00_19);
&Xupdate_avx_16_31(\&body_00_19);
&Xupdate_avx_16_31(\&body_00_19);
&Xupdate_avx_16_31(\&body_00_19);
&Xupdate_avx_32_79(\&body_00_19);
&Xupdate_avx_32_79(\&body_20_39);
&Xupdate_avx_32_79(\&body_20_39);
&Xupdate_avx_32_79(\&body_20_39);
&Xupdate_avx_32_79(\&body_20_39);
&Xupdate_avx_32_79(\&body_20_39);
&Xupdate_avx_32_79(\&body_40_59);
&Xupdate_avx_32_79(\&body_40_59);
&Xupdate_avx_32_79(\&body_40_59);
&Xupdate_avx_32_79(\&body_40_59);
&Xupdate_avx_32_79(\&body_40_59);
&Xupdate_avx_32_79(\&body_20_39);
&Xuplast_avx_80(\&body_20_39); # can jump to "done"
$saved_j=$j; @saved_V=@V;
&Xloop_avx(\&body_20_39);
&Xloop_avx(\&body_20_39);
&Xloop_avx(\&body_20_39);
$code.=<<___;
add 0($ctx),$A # update context
add 4($ctx),@T[0]
add 8($ctx),$C
add 12($ctx),$D
mov $A,0($ctx)
add 16($ctx),$E
mov @T[0],4($ctx)
mov @T[0],$B # magic seed
mov $C,8($ctx)
mov $D,12($ctx)
mov $E,16($ctx)
jmp .Loop_avx
.align 16
.Ldone_avx:
___
$j=$saved_j; @V=@saved_V;
&Xtail_avx(\&body_20_39);
&Xtail_avx(\&body_20_39);
&Xtail_avx(\&body_20_39);
$code.=<<___;
vzeroupper
add 0($ctx),$A # update context
add 4($ctx),@T[0]
add 8($ctx),$C
mov $A,0($ctx)
add 12($ctx),$D
mov @T[0],4($ctx)
add 16($ctx),$E
mov $C,8($ctx)
mov $D,12($ctx)
mov $E,16($ctx)
___
$code.=<<___ if ($win64);
movaps 64+0(%rsp),%xmm6
movaps 64+16(%rsp),%xmm7
movaps 64+32(%rsp),%xmm8
movaps 64+48(%rsp),%xmm9
movaps 64+64(%rsp),%xmm10
___
$code.=<<___;
lea `64+($win64?5*16:0)`(%rsp),%rsi
mov 0(%rsi),%r12
mov 8(%rsi),%rbp
mov 16(%rsi),%rbx
lea 24(%rsi),%rsp
.Lepilogue_avx:
ret
.size sha1_block_data_order_avx,.-sha1_block_data_order_avx
___
}
$code.=<<___;
.align 64
K_XX_XX:
.long 0x5a827999,0x5a827999,0x5a827999,0x5a827999 # K_00_19
.long 0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1 # K_20_39
.long 0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc # K_40_59
.long 0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6 # K_60_79
.long 0x00010203,0x04050607,0x08090a0b,0x0c0d0e0f # pbswap mask
___
}}}
$code.=<<___;
.asciz "SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
.align 64
___
# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
# CONTEXT *context,DISPATCHER_CONTEXT *disp)
if ($win64) {
$rec="%rcx";
$frame="%rdx";
$context="%r8";
$disp="%r9";
$code.=<<___;
.extern __imp_RtlVirtualUnwind
.type se_handler,\@abi-omnipotent
.align 16
se_handler:
push %rsi
push %rdi
push %rbx
push %rbp
push %r12
push %r13
push %r14
push %r15
pushfq
sub \$64,%rsp
mov 120($context),%rax # pull context->Rax
mov 248($context),%rbx # pull context->Rip
lea .Lprologue(%rip),%r10
cmp %r10,%rbx # context->Rip<.Lprologue
jb .Lcommon_seh_tail
mov 152($context),%rax # pull context->Rsp
lea .Lepilogue(%rip),%r10
cmp %r10,%rbx # context->Rip>=.Lepilogue
jae .Lcommon_seh_tail
mov `16*4`(%rax),%rax # pull saved stack pointer
lea 32(%rax),%rax
mov -8(%rax),%rbx
mov -16(%rax),%rbp
mov -24(%rax),%r12
mov -32(%rax),%r13
mov %rbx,144($context) # restore context->Rbx
mov %rbp,160($context) # restore context->Rbp
mov %r12,216($context) # restore context->R12
mov %r13,224($context) # restore context->R13
jmp .Lcommon_seh_tail
.size se_handler,.-se_handler
.type ssse3_handler,\@abi-omnipotent
.align 16
ssse3_handler:
push %rsi
push %rdi
push %rbx
push %rbp
push %r12
push %r13
push %r14
push %r15
pushfq
sub \$64,%rsp
mov 120($context),%rax # pull context->Rax
mov 248($context),%rbx # pull context->Rip
mov 8($disp),%rsi # disp->ImageBase
mov 56($disp),%r11 # disp->HandlerData
mov 0(%r11),%r10d # HandlerData[0]
lea (%rsi,%r10),%r10 # prologue label
cmp %r10,%rbx # context->Rip<prologue label
jb .Lcommon_seh_tail
mov 152($context),%rax # pull context->Rsp
mov 4(%r11),%r10d # HandlerData[1]
lea (%rsi,%r10),%r10 # epilogue label
cmp %r10,%rbx # context->Rip>=epilogue label
jae .Lcommon_seh_tail
lea 64(%rax),%rsi
lea 512($context),%rdi # &context.Xmm6
mov \$10,%ecx
.long 0xa548f3fc # cld; rep movsq
lea `24+64+5*16`(%rax),%rax # adjust stack pointer
mov -8(%rax),%rbx
mov -16(%rax),%rbp
mov -24(%rax),%r12
mov %rbx,144($context) # restore context->Rbx
mov %rbp,160($context) # restore context->Rbp
mov %r12,216($context) # restore cotnext->R12
.Lcommon_seh_tail:
mov 8(%rax),%rdi
mov 16(%rax),%rsi
mov %rax,152($context) # restore context->Rsp
mov %rsi,168($context) # restore context->Rsi
mov %rdi,176($context) # restore context->Rdi
mov 40($disp),%rdi # disp->ContextRecord
mov $context,%rsi # context
mov \$154,%ecx # sizeof(CONTEXT)
.long 0xa548f3fc # cld; rep movsq
mov $disp,%rsi
xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
mov 8(%rsi),%rdx # arg2, disp->ImageBase
mov 0(%rsi),%r8 # arg3, disp->ControlPc
mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
mov 40(%rsi),%r10 # disp->ContextRecord
lea 56(%rsi),%r11 # &disp->HandlerData
lea 24(%rsi),%r12 # &disp->EstablisherFrame
mov %r10,32(%rsp) # arg5
mov %r11,40(%rsp) # arg6
mov %r12,48(%rsp) # arg7
mov %rcx,56(%rsp) # arg8, (NULL)
call *__imp_RtlVirtualUnwind(%rip)
mov \$1,%eax # ExceptionContinueSearch
add \$64,%rsp
popfq
pop %r15
pop %r14
pop %r13
pop %r12
pop %rbp
pop %rbx
pop %rdi
pop %rsi
ret
.size ssse3_handler,.-ssse3_handler
.section .pdata
.align 4
.rva .LSEH_begin_sha1_block_data_order
.rva .LSEH_end_sha1_block_data_order
.rva .LSEH_info_sha1_block_data_order
.rva .LSEH_begin_sha1_block_data_order_ssse3
.rva .LSEH_end_sha1_block_data_order_ssse3
.rva .LSEH_info_sha1_block_data_order_ssse3
___
$code.=<<___ if ($avx);
.rva .LSEH_begin_sha1_block_data_order_avx
.rva .LSEH_end_sha1_block_data_order_avx
.rva .LSEH_info_sha1_block_data_order_avx
___
$code.=<<___;
.section .xdata
.align 8
.LSEH_info_sha1_block_data_order:
.byte 9,0,0,0
.rva se_handler
.LSEH_info_sha1_block_data_order_ssse3:
.byte 9,0,0,0
.rva ssse3_handler
.rva .Lprologue_ssse3,.Lepilogue_ssse3 # HandlerData[]
___
$code.=<<___ if ($avx);
.LSEH_info_sha1_block_data_order_avx:
.byte 9,0,0,0
.rva ssse3_handler
.rva .Lprologue_avx,.Lepilogue_avx # HandlerData[]
___
}
####################################################################
$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
close STDOUT;
Reference in New Issue Copy Permalink