TheArchive/session-android
1
0
Fork 0
mirror of https://github.com/oxen-io/session-android.git synced 2024-12-22 16:07:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
session-android/jni/openssl/crypto/sha/asm/sha512-586.pl
Moxie Marlinspike d83a3d71bc Support for Signal calls. 
Merge in RedPhone

// FREEBIE
2015-09-30 14:30:09 -07:00

645 lines
18 KiB
Perl
Raw Blame History

#!/usr/bin/env perl
#
# ====================================================================
# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# SHA512 block transform for x86. September 2007.
#
# Performance in clock cycles per processed byte (less is better):
#
# Pentium PIII P4 AMD K8 Core2
# gcc 100 75 116 54 66
# icc 97 77 95 55 57
# x86 asm 61 56 82 36 40
# SSE2 asm - - 38 24 20
# x86_64 asm(*) - - 30 10.0 10.5
#
# (*) x86_64 assembler performance is presented for reference
# purposes.
#
# IALU code-path is optimized for elder Pentiums. On vanilla Pentium
# performance improvement over compiler generated code reaches ~60%,
# while on PIII - ~35%. On newer µ-archs improvement varies from 15%
# to 50%, but it's less important as they are expected to execute SSE2
# code-path, which is commonly ~2-3x faster [than compiler generated
# code]. SSE2 code-path is as fast as original sha512-sse2.pl, even
# though it does not use 128-bit operations. The latter means that
# SSE2-aware kernel is no longer required to execute the code. Another
# difference is that new code optimizes amount of writes, but at the
# cost of increased data cache "footprint" by 1/2KB.
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386");
$sse2=0;
for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
&external_label("OPENSSL_ia32cap_P") if ($sse2);
$Tlo=&DWP(0,"esp"); $Thi=&DWP(4,"esp");
$Alo=&DWP(8,"esp"); $Ahi=&DWP(8+4,"esp");
$Blo=&DWP(16,"esp"); $Bhi=&DWP(16+4,"esp");
$Clo=&DWP(24,"esp"); $Chi=&DWP(24+4,"esp");
$Dlo=&DWP(32,"esp"); $Dhi=&DWP(32+4,"esp");
$Elo=&DWP(40,"esp"); $Ehi=&DWP(40+4,"esp");
$Flo=&DWP(48,"esp"); $Fhi=&DWP(48+4,"esp");
$Glo=&DWP(56,"esp"); $Ghi=&DWP(56+4,"esp");
$Hlo=&DWP(64,"esp"); $Hhi=&DWP(64+4,"esp");
$K512="ebp";
$Asse2=&QWP(0,"esp");
$Bsse2=&QWP(8,"esp");
$Csse2=&QWP(16,"esp");
$Dsse2=&QWP(24,"esp");
$Esse2=&QWP(32,"esp");
$Fsse2=&QWP(40,"esp");
$Gsse2=&QWP(48,"esp");
$Hsse2=&QWP(56,"esp");
$A="mm0"; # B-D and
$E="mm4"; # F-H are commonly loaded to respectively mm1-mm3 and
# mm5-mm7, but it's done on on-demand basis...
sub BODY_00_15_sse2 {
my $prefetch=shift;
&movq ("mm5",$Fsse2); # load f
&movq ("mm6",$Gsse2); # load g
&movq ("mm7",$Hsse2); # load h
&movq ("mm1",$E); # %mm1 is sliding right
&movq ("mm2",$E); # %mm2 is sliding left
&psrlq ("mm1",14);
&movq ($Esse2,$E); # modulo-scheduled save e
&psllq ("mm2",23);
&movq ("mm3","mm1"); # %mm3 is T1
&psrlq ("mm1",4);
&pxor ("mm3","mm2");
&psllq ("mm2",23);
&pxor ("mm3","mm1");
&psrlq ("mm1",23);
&pxor ("mm3","mm2");
&psllq ("mm2",4);
&pxor ("mm3","mm1");
&paddq ("mm7",QWP(0,$K512)); # h+=K512[i]
&pxor ("mm3","mm2"); # T1=Sigma1_512(e)
&pxor ("mm5","mm6"); # f^=g
&movq ("mm1",$Bsse2); # load b
&pand ("mm5",$E); # f&=e
&movq ("mm2",$Csse2); # load c
&pxor ("mm5","mm6"); # f^=g
&movq ($E,$Dsse2); # e = load d
&paddq ("mm3","mm5"); # T1+=Ch(e,f,g)
&movq (&QWP(0,"esp"),$A); # modulo-scheduled save a
&paddq ("mm3","mm7"); # T1+=h
&movq ("mm5",$A); # %mm5 is sliding right
&movq ("mm6",$A); # %mm6 is sliding left
&paddq ("mm3",&QWP(8*9,"esp")); # T1+=X[0]
&psrlq ("mm5",28);
&paddq ($E,"mm3"); # e += T1
&psllq ("mm6",25);
&movq ("mm7","mm5"); # %mm7 is T2
&psrlq ("mm5",6);
&pxor ("mm7","mm6");
&psllq ("mm6",5);
&pxor ("mm7","mm5");
&psrlq ("mm5",5);
&pxor ("mm7","mm6");
&psllq ("mm6",6);
&pxor ("mm7","mm5");
&sub ("esp",8);
&pxor ("mm7","mm6"); # T2=Sigma0_512(a)
&movq ("mm5",$A); # %mm5=a
&por ($A,"mm2"); # a=a|c
&movq ("mm6",&QWP(8*(9+16-14),"esp")) if ($prefetch);
&pand ("mm5","mm2"); # %mm5=a&c
&pand ($A,"mm1"); # a=(a|c)&b
&movq ("mm2",&QWP(8*(9+16-1),"esp")) if ($prefetch);
&por ("mm5",$A); # %mm5=(a&c)|((a|c)&b)
&paddq ("mm7","mm5"); # T2+=Maj(a,b,c)
&movq ($A,"mm3"); # a=T1
&mov (&LB("edx"),&BP(0,$K512));
&paddq ($A,"mm7"); # a+=T2
&add ($K512,8);
}
sub BODY_00_15_x86 {
#define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41))
# LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23
# HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23
&mov ("ecx",$Elo);
&mov ("edx",$Ehi);
&mov ("esi","ecx");
&shr ("ecx",9); # lo>>9
&mov ("edi","edx");
&shr ("edx",9); # hi>>9
&mov ("ebx","ecx");
&shl ("esi",14); # lo<<14
&mov ("eax","edx");
&shl ("edi",14); # hi<<14
&xor ("ebx","esi");
&shr ("ecx",14-9); # lo>>14
&xor ("eax","edi");
&shr ("edx",14-9); # hi>>14
&xor ("eax","ecx");
&shl ("esi",18-14); # lo<<18
&xor ("ebx","edx");
&shl ("edi",18-14); # hi<<18
&xor ("ebx","esi");
&shr ("ecx",18-14); # lo>>18
&xor ("eax","edi");
&shr ("edx",18-14); # hi>>18
&xor ("eax","ecx");
&shl ("esi",23-18); # lo<<23
&xor ("ebx","edx");
&shl ("edi",23-18); # hi<<23
&xor ("eax","esi");
&xor ("ebx","edi"); # T1 = Sigma1(e)
&mov ("ecx",$Flo);
&mov ("edx",$Fhi);
&mov ("esi",$Glo);
&mov ("edi",$Ghi);
&add ("eax",$Hlo);
&adc ("ebx",$Hhi); # T1 += h
&xor ("ecx","esi");
&xor ("edx","edi");
&and ("ecx",$Elo);
&and ("edx",$Ehi);
&add ("eax",&DWP(8*(9+15)+0,"esp"));
&adc ("ebx",&DWP(8*(9+15)+4,"esp")); # T1 += X[0]
&xor ("ecx","esi");
&xor ("edx","edi"); # Ch(e,f,g) = (f^g)&e)^g
&mov ("esi",&DWP(0,$K512));
&mov ("edi",&DWP(4,$K512)); # K[i]
&add ("eax","ecx");
&adc ("ebx","edx"); # T1 += Ch(e,f,g)
&mov ("ecx",$Dlo);
&mov ("edx",$Dhi);
&add ("eax","esi");
&adc ("ebx","edi"); # T1 += K[i]
&mov ($Tlo,"eax");
&mov ($Thi,"ebx"); # put T1 away
&add ("eax","ecx");
&adc ("ebx","edx"); # d += T1
#define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
# LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25
# HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25
&mov ("ecx",$Alo);
&mov ("edx",$Ahi);
&mov ($Dlo,"eax");
&mov ($Dhi,"ebx");
&mov ("esi","ecx");
&shr ("ecx",2); # lo>>2
&mov ("edi","edx");
&shr ("edx",2); # hi>>2
&mov ("ebx","ecx");
&shl ("esi",4); # lo<<4
&mov ("eax","edx");
&shl ("edi",4); # hi<<4
&xor ("ebx","esi");
&shr ("ecx",7-2); # lo>>7
&xor ("eax","edi");
&shr ("edx",7-2); # hi>>7
&xor ("ebx","ecx");
&shl ("esi",25-4); # lo<<25
&xor ("eax","edx");
&shl ("edi",25-4); # hi<<25
&xor ("eax","esi");
&shr ("ecx",28-7); # lo>>28
&xor ("ebx","edi");
&shr ("edx",28-7); # hi>>28
&xor ("eax","ecx");
&shl ("esi",30-25); # lo<<30
&xor ("ebx","edx");
&shl ("edi",30-25); # hi<<30
&xor ("eax","esi");
&xor ("ebx","edi"); # Sigma0(a)
&mov ("ecx",$Alo);
&mov ("edx",$Ahi);
&mov ("esi",$Blo);
&mov ("edi",$Bhi);
&add ("eax",$Tlo);
&adc ("ebx",$Thi); # T1 = Sigma0(a)+T1
&or ("ecx","esi");
&or ("edx","edi");
&and ("ecx",$Clo);
&and ("edx",$Chi);
&and ("esi",$Alo);
&and ("edi",$Ahi);
&or ("ecx","esi");
&or ("edx","edi"); # Maj(a,b,c) = ((a|b)&c)|(a&b)
&add ("eax","ecx");
&adc ("ebx","edx"); # T1 += Maj(a,b,c)
&mov ($Tlo,"eax");
&mov ($Thi,"ebx");
&mov (&LB("edx"),&BP(0,$K512)); # pre-fetch LSB of *K
&sub ("esp",8);
&lea ($K512,&DWP(8,$K512)); # K++
}
&function_begin("sha512_block_data_order");
&mov ("esi",wparam(0)); # ctx
&mov ("edi",wparam(1)); # inp
&mov ("eax",wparam(2)); # num
&mov ("ebx","esp"); # saved sp
&call (&label("pic_point")); # make it PIC!
&set_label("pic_point");
&blindpop($K512);
&lea ($K512,&DWP(&label("K512")."-".&label("pic_point"),$K512));
&sub ("esp",16);
&and ("esp",-64);
&shl ("eax",7);
&add ("eax","edi");
&mov (&DWP(0,"esp"),"esi"); # ctx
&mov (&DWP(4,"esp"),"edi"); # inp
&mov (&DWP(8,"esp"),"eax"); # inp+num*128
&mov (&DWP(12,"esp"),"ebx"); # saved sp
if ($sse2) {
&picmeup("edx","OPENSSL_ia32cap_P",$K512,&label("K512"));
&bt (&DWP(0,"edx"),26);
&jnc (&label("loop_x86"));
# load ctx->h[0-7]
&movq ($A,&QWP(0,"esi"));
&movq ("mm1",&QWP(8,"esi"));
&movq ("mm2",&QWP(16,"esi"));
&movq ("mm3",&QWP(24,"esi"));
&movq ($E,&QWP(32,"esi"));
&movq ("mm5",&QWP(40,"esi"));
&movq ("mm6",&QWP(48,"esi"));
&movq ("mm7",&QWP(56,"esi"));
&sub ("esp",8*10);
&set_label("loop_sse2",16);
# &movq ($Asse2,$A);
&movq ($Bsse2,"mm1");
&movq ($Csse2,"mm2");
&movq ($Dsse2,"mm3");
# &movq ($Esse2,$E);
&movq ($Fsse2,"mm5");
&movq ($Gsse2,"mm6");
&movq ($Hsse2,"mm7");
&mov ("ecx",&DWP(0,"edi"));
&mov ("edx",&DWP(4,"edi"));
&add ("edi",8);
&bswap ("ecx");
&bswap ("edx");
&mov (&DWP(8*9+4,"esp"),"ecx");
&mov (&DWP(8*9+0,"esp"),"edx");
&set_label("00_14_sse2",16);
&mov ("eax",&DWP(0,"edi"));
&mov ("ebx",&DWP(4,"edi"));
&add ("edi",8);
&bswap ("eax");
&bswap ("ebx");
&mov (&DWP(8*8+4,"esp"),"eax");
&mov (&DWP(8*8+0,"esp"),"ebx");
&BODY_00_15_sse2();
&cmp (&LB("edx"),0x35);
&jne (&label("00_14_sse2"));
&BODY_00_15_sse2(1);
&set_label("16_79_sse2",16);
#&movq ("mm2",&QWP(8*(9+16-1),"esp")); #prefetched in BODY_00_15
#&movq ("mm6",&QWP(8*(9+16-14),"esp"));
&movq ("mm1","mm2");
&psrlq ("mm2",1);
&movq ("mm7","mm6");
&psrlq ("mm6",6);
&movq ("mm3","mm2");
&psrlq ("mm2",7-1);
&movq ("mm5","mm6");
&psrlq ("mm6",19-6);
&pxor ("mm3","mm2");
&psrlq ("mm2",8-7);
&pxor ("mm5","mm6");
&psrlq ("mm6",61-19);
&pxor ("mm3","mm2");
&movq ("mm2",&QWP(8*(9+16),"esp"));
&psllq ("mm1",56);
&pxor ("mm5","mm6");
&psllq ("mm7",3);
&pxor ("mm3","mm1");
&paddq ("mm2",&QWP(8*(9+16-9),"esp"));
&psllq ("mm1",63-56);
&pxor ("mm5","mm7");
&psllq ("mm7",45-3);
&pxor ("mm3","mm1");
&pxor ("mm5","mm7");
&paddq ("mm3","mm5");
&paddq ("mm3","mm2");
&movq (&QWP(8*9,"esp"),"mm3");
&BODY_00_15_sse2(1);
&cmp (&LB("edx"),0x17);
&jne (&label("16_79_sse2"));
# &movq ($A,$Asse2);
&movq ("mm1",$Bsse2);
&movq ("mm2",$Csse2);
&movq ("mm3",$Dsse2);
# &movq ($E,$Esse2);
&movq ("mm5",$Fsse2);
&movq ("mm6",$Gsse2);
&movq ("mm7",$Hsse2);
&paddq ($A,&QWP(0,"esi"));
&paddq ("mm1",&QWP(8,"esi"));
&paddq ("mm2",&QWP(16,"esi"));
&paddq ("mm3",&QWP(24,"esi"));
&paddq ($E,&QWP(32,"esi"));
&paddq ("mm5",&QWP(40,"esi"));
&paddq ("mm6",&QWP(48,"esi"));
&paddq ("mm7",&QWP(56,"esi"));
&movq (&QWP(0,"esi"),$A);
&movq (&QWP(8,"esi"),"mm1");
&movq (&QWP(16,"esi"),"mm2");
&movq (&QWP(24,"esi"),"mm3");
&movq (&QWP(32,"esi"),$E);
&movq (&QWP(40,"esi"),"mm5");
&movq (&QWP(48,"esi"),"mm6");
&movq (&QWP(56,"esi"),"mm7");
&add ("esp",8*80); # destroy frame
&sub ($K512,8*80); # rewind K
&cmp ("edi",&DWP(8*10+8,"esp")); # are we done yet?
&jb (&label("loop_sse2"));
&emms ();
&mov ("esp",&DWP(8*10+12,"esp")); # restore sp
&function_end_A();
}
&set_label("loop_x86",16);
# copy input block to stack reversing byte and qword order
for ($i=0;$i<8;$i++) {
&mov ("eax",&DWP($i*16+0,"edi"));
&mov ("ebx",&DWP($i*16+4,"edi"));
&mov ("ecx",&DWP($i*16+8,"edi"));
&mov ("edx",&DWP($i*16+12,"edi"));
&bswap ("eax");
&bswap ("ebx");
&bswap ("ecx");
&bswap ("edx");
&push ("eax");
&push ("ebx");
&push ("ecx");
&push ("edx");
}
&add ("edi",128);
&sub ("esp",9*8); # place for T,A,B,C,D,E,F,G,H
&mov (&DWP(8*(9+16)+4,"esp"),"edi");
# copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack
&lea ("edi",&DWP(8,"esp"));
&mov ("ecx",16);
&data_word(0xA5F3F689); # rep movsd
&set_label("00_15_x86",16);
&BODY_00_15_x86();
&cmp (&LB("edx"),0x94);
&jne (&label("00_15_x86"));
&set_label("16_79_x86",16);
#define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7))
# LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25
# HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7
&mov ("ecx",&DWP(8*(9+15+16-1)+0,"esp"));
&mov ("edx",&DWP(8*(9+15+16-1)+4,"esp"));
&mov ("esi","ecx");
&shr ("ecx",1); # lo>>1
&mov ("edi","edx");
&shr ("edx",1); # hi>>1
&mov ("eax","ecx");
&shl ("esi",24); # lo<<24
&mov ("ebx","edx");
&shl ("edi",24); # hi<<24
&xor ("ebx","esi");
&shr ("ecx",7-1); # lo>>7
&xor ("eax","edi");
&shr ("edx",7-1); # hi>>7
&xor ("eax","ecx");
&shl ("esi",31-24); # lo<<31
&xor ("ebx","edx");
&shl ("edi",25-24); # hi<<25
&xor ("ebx","esi");
&shr ("ecx",8-7); # lo>>8
&xor ("eax","edi");
&shr ("edx",8-7); # hi>>8
&xor ("eax","ecx");
&shl ("edi",31-25); # hi<<31
&xor ("ebx","edx");
&xor ("eax","edi"); # T1 = sigma0(X[-15])
&mov (&DWP(0,"esp"),"eax");
&mov (&DWP(4,"esp"),"ebx"); # put T1 away
#define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6))
# LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26
# HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6
&mov ("ecx",&DWP(8*(9+15+16-14)+0,"esp"));
&mov ("edx",&DWP(8*(9+15+16-14)+4,"esp"));
&mov ("esi","ecx");
&shr ("ecx",6); # lo>>6
&mov ("edi","edx");
&shr ("edx",6); # hi>>6
&mov ("eax","ecx");
&shl ("esi",3); # lo<<3
&mov ("ebx","edx");
&shl ("edi",3); # hi<<3
&xor ("eax","esi");
&shr ("ecx",19-6); # lo>>19
&xor ("ebx","edi");
&shr ("edx",19-6); # hi>>19
&xor ("eax","ecx");
&shl ("esi",13-3); # lo<<13
&xor ("ebx","edx");
&shl ("edi",13-3); # hi<<13
&xor ("ebx","esi");
&shr ("ecx",29-19); # lo>>29
&xor ("eax","edi");
&shr ("edx",29-19); # hi>>29
&xor ("ebx","ecx");
&shl ("edi",26-13); # hi<<26
&xor ("eax","edx");
&xor ("eax","edi"); # sigma1(X[-2])
&mov ("ecx",&DWP(8*(9+15+16)+0,"esp"));
&mov ("edx",&DWP(8*(9+15+16)+4,"esp"));
&add ("eax",&DWP(0,"esp"));
&adc ("ebx",&DWP(4,"esp")); # T1 = sigma1(X[-2])+T1
&mov ("esi",&DWP(8*(9+15+16-9)+0,"esp"));
&mov ("edi",&DWP(8*(9+15+16-9)+4,"esp"));
&add ("eax","ecx");
&adc ("ebx","edx"); # T1 += X[-16]
&add ("eax","esi");
&adc ("ebx","edi"); # T1 += X[-7]
&mov (&DWP(8*(9+15)+0,"esp"),"eax");
&mov (&DWP(8*(9+15)+4,"esp"),"ebx"); # save X[0]
&BODY_00_15_x86();
&cmp (&LB("edx"),0x17);
&jne (&label("16_79_x86"));
&mov ("esi",&DWP(8*(9+16+80)+0,"esp"));# ctx
&mov ("edi",&DWP(8*(9+16+80)+4,"esp"));# inp
for($i=0;$i<4;$i++) {
&mov ("eax",&DWP($i*16+0,"esi"));
&mov ("ebx",&DWP($i*16+4,"esi"));
&mov ("ecx",&DWP($i*16+8,"esi"));
&mov ("edx",&DWP($i*16+12,"esi"));
&add ("eax",&DWP(8+($i*16)+0,"esp"));
&adc ("ebx",&DWP(8+($i*16)+4,"esp"));
&mov (&DWP($i*16+0,"esi"),"eax");
&mov (&DWP($i*16+4,"esi"),"ebx");
&add ("ecx",&DWP(8+($i*16)+8,"esp"));
&adc ("edx",&DWP(8+($i*16)+12,"esp"));
&mov (&DWP($i*16+8,"esi"),"ecx");
&mov (&DWP($i*16+12,"esi"),"edx");
}
&add ("esp",8*(9+16+80)); # destroy frame
&sub ($K512,8*80); # rewind K
&cmp ("edi",&DWP(8,"esp")); # are we done yet?
&jb (&label("loop_x86"));
&mov ("esp",&DWP(12,"esp")); # restore sp
&function_end_A();
&set_label("K512",64); # Yes! I keep it in the code segment!
&data_word(0xd728ae22,0x428a2f98); # u64
&data_word(0x23ef65cd,0x71374491); # u64
&data_word(0xec4d3b2f,0xb5c0fbcf); # u64
&data_word(0x8189dbbc,0xe9b5dba5); # u64
&data_word(0xf348b538,0x3956c25b); # u64
&data_word(0xb605d019,0x59f111f1); # u64
&data_word(0xaf194f9b,0x923f82a4); # u64
&data_word(0xda6d8118,0xab1c5ed5); # u64
&data_word(0xa3030242,0xd807aa98); # u64
&data_word(0x45706fbe,0x12835b01); # u64
&data_word(0x4ee4b28c,0x243185be); # u64
&data_word(0xd5ffb4e2,0x550c7dc3); # u64
&data_word(0xf27b896f,0x72be5d74); # u64
&data_word(0x3b1696b1,0x80deb1fe); # u64
&data_word(0x25c71235,0x9bdc06a7); # u64
&data_word(0xcf692694,0xc19bf174); # u64
&data_word(0x9ef14ad2,0xe49b69c1); # u64
&data_word(0x384f25e3,0xefbe4786); # u64
&data_word(0x8b8cd5b5,0x0fc19dc6); # u64
&data_word(0x77ac9c65,0x240ca1cc); # u64
&data_word(0x592b0275,0x2de92c6f); # u64
&data_word(0x6ea6e483,0x4a7484aa); # u64
&data_word(0xbd41fbd4,0x5cb0a9dc); # u64
&data_word(0x831153b5,0x76f988da); # u64
&data_word(0xee66dfab,0x983e5152); # u64
&data_word(0x2db43210,0xa831c66d); # u64
&data_word(0x98fb213f,0xb00327c8); # u64
&data_word(0xbeef0ee4,0xbf597fc7); # u64
&data_word(0x3da88fc2,0xc6e00bf3); # u64
&data_word(0x930aa725,0xd5a79147); # u64
&data_word(0xe003826f,0x06ca6351); # u64
&data_word(0x0a0e6e70,0x14292967); # u64
&data_word(0x46d22ffc,0x27b70a85); # u64
&data_word(0x5c26c926,0x2e1b2138); # u64
&data_word(0x5ac42aed,0x4d2c6dfc); # u64
&data_word(0x9d95b3df,0x53380d13); # u64
&data_word(0x8baf63de,0x650a7354); # u64
&data_word(0x3c77b2a8,0x766a0abb); # u64
&data_word(0x47edaee6,0x81c2c92e); # u64
&data_word(0x1482353b,0x92722c85); # u64
&data_word(0x4cf10364,0xa2bfe8a1); # u64
&data_word(0xbc423001,0xa81a664b); # u64
&data_word(0xd0f89791,0xc24b8b70); # u64
&data_word(0x0654be30,0xc76c51a3); # u64
&data_word(0xd6ef5218,0xd192e819); # u64
&data_word(0x5565a910,0xd6990624); # u64
&data_word(0x5771202a,0xf40e3585); # u64
&data_word(0x32bbd1b8,0x106aa070); # u64
&data_word(0xb8d2d0c8,0x19a4c116); # u64
&data_word(0x5141ab53,0x1e376c08); # u64
&data_word(0xdf8eeb99,0x2748774c); # u64
&data_word(0xe19b48a8,0x34b0bcb5); # u64
&data_word(0xc5c95a63,0x391c0cb3); # u64
&data_word(0xe3418acb,0x4ed8aa4a); # u64
&data_word(0x7763e373,0x5b9cca4f); # u64
&data_word(0xd6b2b8a3,0x682e6ff3); # u64
&data_word(0x5defb2fc,0x748f82ee); # u64
&data_word(0x43172f60,0x78a5636f); # u64
&data_word(0xa1f0ab72,0x84c87814); # u64
&data_word(0x1a6439ec,0x8cc70208); # u64
&data_word(0x23631e28,0x90befffa); # u64
&data_word(0xde82bde9,0xa4506ceb); # u64
&data_word(0xb2c67915,0xbef9a3f7); # u64
&data_word(0xe372532b,0xc67178f2); # u64
&data_word(0xea26619c,0xca273ece); # u64
&data_word(0x21c0c207,0xd186b8c7); # u64
&data_word(0xcde0eb1e,0xeada7dd6); # u64
&data_word(0xee6ed178,0xf57d4f7f); # u64
&data_word(0x72176fba,0x06f067aa); # u64
&data_word(0xa2c898a6,0x0a637dc5); # u64
&data_word(0xbef90dae,0x113f9804); # u64
&data_word(0x131c471b,0x1b710b35); # u64
&data_word(0x23047d84,0x28db77f5); # u64
&data_word(0x40c72493,0x32caab7b); # u64
&data_word(0x15c9bebc,0x3c9ebe0a); # u64
&data_word(0x9c100d4c,0x431d67c4); # u64
&data_word(0xcb3e42b6,0x4cc5d4be); # u64
&data_word(0xfc657e2a,0x597f299c); # u64
&data_word(0x3ad6faec,0x5fcb6fab); # u64
&data_word(0x4a475817,0x6c44198c); # u64
&function_end_B("sha512_block_data_order");
&asciz("SHA512 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>");
&asm_finish();
Reference in New Issue View Git Blame Copy Permalink