2023-01-27 21:37:20 +00:00
|
|
|
|
// Copyright (c) Tailscale Inc & AUTHORS
|
|
|
|
|
// SPDX-License-Identifier: BSD-3-Clause
|
2022-01-19 20:05:17 +00:00
|
|
|
|
|
|
|
|
|
package netstack
|
|
|
|
|
|
|
|
|
|
import (
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
"context"
|
2022-09-21 22:07:57 +00:00
|
|
|
|
"fmt"
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
"maps"
|
|
|
|
|
"net"
|
all: convert more code to use net/netip directly
perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.)
perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. )
goimports -w .
Then delete some stuff from the net/netaddr shim package which is no
longer neeed.
Updates #5162
Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-26 04:14:09 +00:00
|
|
|
|
"net/netip"
|
2022-01-19 20:05:17 +00:00
|
|
|
|
"runtime"
|
|
|
|
|
"testing"
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
"time"
|
2022-01-19 20:05:17 +00:00
|
|
|
|
|
2024-06-13 17:48:45 +00:00
|
|
|
|
"gvisor.dev/gvisor/pkg/buffer"
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
"gvisor.dev/gvisor/pkg/tcpip"
|
|
|
|
|
"gvisor.dev/gvisor/pkg/tcpip/header"
|
2024-06-13 17:48:45 +00:00
|
|
|
|
"gvisor.dev/gvisor/pkg/tcpip/stack"
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
"tailscale.com/envknob"
|
2022-11-08 21:09:23 +00:00
|
|
|
|
"tailscale.com/ipn"
|
|
|
|
|
"tailscale.com/ipn/ipnlocal"
|
|
|
|
|
"tailscale.com/ipn/store/mem"
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
"tailscale.com/metrics"
|
2022-01-19 20:05:17 +00:00
|
|
|
|
"tailscale.com/net/packet"
|
2022-11-08 21:09:23 +00:00
|
|
|
|
"tailscale.com/net/tsaddr"
|
2022-01-19 20:05:17 +00:00
|
|
|
|
"tailscale.com/net/tsdial"
|
|
|
|
|
"tailscale.com/net/tstun"
|
2023-05-03 20:57:17 +00:00
|
|
|
|
"tailscale.com/tsd"
|
2023-01-19 14:48:39 +00:00
|
|
|
|
"tailscale.com/tstest"
|
2022-09-21 18:19:34 +00:00
|
|
|
|
"tailscale.com/types/ipproto"
|
2023-03-23 17:49:56 +00:00
|
|
|
|
"tailscale.com/types/logid"
|
2022-01-19 20:05:17 +00:00
|
|
|
|
"tailscale.com/wgengine"
|
|
|
|
|
"tailscale.com/wgengine/filter"
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
// TestInjectInboundLeak tests that injectInbound doesn't leak memory.
|
|
|
|
|
// See https://github.com/tailscale/tailscale/issues/3762
|
|
|
|
|
func TestInjectInboundLeak(t *testing.T) {
|
|
|
|
|
tunDev := tstun.NewFake()
|
|
|
|
|
dialer := new(tsdial.Dialer)
|
2022-03-16 23:27:57 +00:00
|
|
|
|
logf := func(format string, args ...any) {
|
2022-01-19 20:05:17 +00:00
|
|
|
|
if !t.Failed() {
|
|
|
|
|
t.Logf(format, args...)
|
|
|
|
|
}
|
|
|
|
|
}
|
2023-05-03 20:57:17 +00:00
|
|
|
|
sys := new(tsd.System)
|
2022-01-19 20:05:17 +00:00
|
|
|
|
eng, err := wgengine.NewUserspaceEngine(logf, wgengine.Config{
|
ipn/ipnlocal, all: plumb health trackers in tests
I saw some panics in CI, like:
2024-05-08T04:30:25.9553518Z ## WARNING: (non-fatal) nil health.Tracker (being strict in CI):
2024-05-08T04:30:25.9554043Z goroutine 801 [running]:
2024-05-08T04:30:25.9554489Z tailscale.com/health.(*Tracker).nil(0x0)
2024-05-08T04:30:25.9555086Z tailscale.com/health/health.go:185 +0x70
2024-05-08T04:30:25.9555688Z tailscale.com/health.(*Tracker).SetUDP4Unbound(0x0, 0x0)
2024-05-08T04:30:25.9556373Z tailscale.com/health/health.go:532 +0x2f
2024-05-08T04:30:25.9557296Z tailscale.com/wgengine/magicsock.(*Conn).bindSocket(0xc0003b4808, 0xc0003b4878, {0x1fbca53, 0x4}, 0x0)
2024-05-08T04:30:25.9558301Z tailscale.com/wgengine/magicsock/magicsock.go:2481 +0x12c5
2024-05-08T04:30:25.9559026Z tailscale.com/wgengine/magicsock.(*Conn).rebind(0xc0003b4808, 0x0)
2024-05-08T04:30:25.9559874Z tailscale.com/wgengine/magicsock/magicsock.go:2510 +0x16f
2024-05-08T04:30:25.9561038Z tailscale.com/wgengine/magicsock.NewConn({0xc000063c80, 0x0, 0xc000197930, 0xc000197950, 0xc000197960, {0x0, 0x0}, 0xc000197970, 0xc000198ee0, 0x0, ...})
2024-05-08T04:30:25.9562402Z tailscale.com/wgengine/magicsock/magicsock.go:476 +0xd5f
2024-05-08T04:30:25.9563779Z tailscale.com/wgengine.NewUserspaceEngine(0xc000063c80, {{0x22c8750, 0xc0001976b0}, 0x0, {0x22c3210, 0xc000063c80}, {0x22c31d8, 0x2d3c900}, 0x0, 0x0, ...})
2024-05-08T04:30:25.9564982Z tailscale.com/wgengine/userspace.go:389 +0x159d
2024-05-08T04:30:25.9565529Z tailscale.com/ipn/ipnlocal.newTestBackend(0xc000358b60)
2024-05-08T04:30:25.9566086Z tailscale.com/ipn/ipnlocal/serve_test.go:675 +0x2a5
2024-05-08T04:30:25.9566612Z ta
Updates #11874
Change-Id: I3432ed52d670743e532be4642f38dbd6e3763b1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2024-05-08 04:37:33 +00:00
|
|
|
|
Tun: tunDev,
|
|
|
|
|
Dialer: dialer,
|
|
|
|
|
SetSubsystem: sys.Set,
|
|
|
|
|
HealthTracker: sys.HealthTracker(),
|
2022-01-19 20:05:17 +00:00
|
|
|
|
})
|
|
|
|
|
if err != nil {
|
|
|
|
|
t.Fatal(err)
|
|
|
|
|
}
|
|
|
|
|
defer eng.Close()
|
2023-05-03 20:57:17 +00:00
|
|
|
|
sys.Set(eng)
|
|
|
|
|
sys.Set(new(mem.Store))
|
2022-01-19 20:05:17 +00:00
|
|
|
|
|
2023-05-03 20:57:17 +00:00
|
|
|
|
tunWrap := sys.Tun.Get()
|
|
|
|
|
lb, err := ipnlocal.NewLocalBackend(logf, logid.PublicID{}, sys, 0)
|
2022-12-23 18:22:39 +00:00
|
|
|
|
if err != nil {
|
|
|
|
|
t.Fatal(err)
|
|
|
|
|
}
|
|
|
|
|
|
2024-02-02 18:45:32 +00:00
|
|
|
|
ns, err := Create(logf, tunWrap, eng, sys.MagicSock.Get(), dialer, sys.DNSManager.Get(), sys.ProxyMapper(), nil)
|
2022-01-19 20:05:17 +00:00
|
|
|
|
if err != nil {
|
|
|
|
|
t.Fatal(err)
|
|
|
|
|
}
|
|
|
|
|
defer ns.Close()
|
|
|
|
|
ns.ProcessLocalIPs = true
|
2022-12-23 18:22:39 +00:00
|
|
|
|
if err := ns.Start(lb); err != nil {
|
2022-01-19 20:05:17 +00:00
|
|
|
|
t.Fatalf("Start: %v", err)
|
|
|
|
|
}
|
all: convert more code to use net/netip directly
perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.)
perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. )
goimports -w .
Then delete some stuff from the net/netaddr shim package which is no
longer neeed.
Updates #5162
Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-26 04:14:09 +00:00
|
|
|
|
ns.atomicIsLocalIPFunc.Store(func(netip.Addr) bool { return true })
|
2022-01-19 20:05:17 +00:00
|
|
|
|
|
|
|
|
|
pkt := &packet.Parsed{}
|
|
|
|
|
const N = 10_000
|
|
|
|
|
ms0 := getMemStats()
|
2024-04-16 20:15:13 +00:00
|
|
|
|
for range N {
|
2024-08-20 22:22:19 +00:00
|
|
|
|
outcome, _ := ns.injectInbound(pkt, tunWrap, nil)
|
2022-01-19 20:05:17 +00:00
|
|
|
|
if outcome != filter.DropSilently {
|
|
|
|
|
t.Fatalf("got outcome %v; want DropSilently", outcome)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
ms1 := getMemStats()
|
|
|
|
|
if grew := int64(ms1.HeapObjects) - int64(ms0.HeapObjects); grew >= N {
|
|
|
|
|
t.Fatalf("grew by %v (which is too much and >= the %v packets we sent)", grew, N)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func getMemStats() (ms runtime.MemStats) {
|
|
|
|
|
runtime.GC()
|
|
|
|
|
runtime.ReadMemStats(&ms)
|
|
|
|
|
return
|
|
|
|
|
}
|
2022-04-08 00:21:45 +00:00
|
|
|
|
|
2024-06-13 17:48:45 +00:00
|
|
|
|
func makeNetstack(tb testing.TB, config func(*Impl)) *Impl {
|
2022-09-21 18:19:34 +00:00
|
|
|
|
tunDev := tstun.NewFake()
|
2023-05-03 20:57:17 +00:00
|
|
|
|
sys := &tsd.System{}
|
|
|
|
|
sys.Set(new(mem.Store))
|
2022-09-21 18:19:34 +00:00
|
|
|
|
dialer := new(tsdial.Dialer)
|
2024-06-13 17:48:45 +00:00
|
|
|
|
logf := tstest.WhileTestRunningLogger(tb)
|
2022-09-21 18:19:34 +00:00
|
|
|
|
eng, err := wgengine.NewUserspaceEngine(logf, wgengine.Config{
|
ipn/ipnlocal, all: plumb health trackers in tests
I saw some panics in CI, like:
2024-05-08T04:30:25.9553518Z ## WARNING: (non-fatal) nil health.Tracker (being strict in CI):
2024-05-08T04:30:25.9554043Z goroutine 801 [running]:
2024-05-08T04:30:25.9554489Z tailscale.com/health.(*Tracker).nil(0x0)
2024-05-08T04:30:25.9555086Z tailscale.com/health/health.go:185 +0x70
2024-05-08T04:30:25.9555688Z tailscale.com/health.(*Tracker).SetUDP4Unbound(0x0, 0x0)
2024-05-08T04:30:25.9556373Z tailscale.com/health/health.go:532 +0x2f
2024-05-08T04:30:25.9557296Z tailscale.com/wgengine/magicsock.(*Conn).bindSocket(0xc0003b4808, 0xc0003b4878, {0x1fbca53, 0x4}, 0x0)
2024-05-08T04:30:25.9558301Z tailscale.com/wgengine/magicsock/magicsock.go:2481 +0x12c5
2024-05-08T04:30:25.9559026Z tailscale.com/wgengine/magicsock.(*Conn).rebind(0xc0003b4808, 0x0)
2024-05-08T04:30:25.9559874Z tailscale.com/wgengine/magicsock/magicsock.go:2510 +0x16f
2024-05-08T04:30:25.9561038Z tailscale.com/wgengine/magicsock.NewConn({0xc000063c80, 0x0, 0xc000197930, 0xc000197950, 0xc000197960, {0x0, 0x0}, 0xc000197970, 0xc000198ee0, 0x0, ...})
2024-05-08T04:30:25.9562402Z tailscale.com/wgengine/magicsock/magicsock.go:476 +0xd5f
2024-05-08T04:30:25.9563779Z tailscale.com/wgengine.NewUserspaceEngine(0xc000063c80, {{0x22c8750, 0xc0001976b0}, 0x0, {0x22c3210, 0xc000063c80}, {0x22c31d8, 0x2d3c900}, 0x0, 0x0, ...})
2024-05-08T04:30:25.9564982Z tailscale.com/wgengine/userspace.go:389 +0x159d
2024-05-08T04:30:25.9565529Z tailscale.com/ipn/ipnlocal.newTestBackend(0xc000358b60)
2024-05-08T04:30:25.9566086Z tailscale.com/ipn/ipnlocal/serve_test.go:675 +0x2a5
2024-05-08T04:30:25.9566612Z ta
Updates #11874
Change-Id: I3432ed52d670743e532be4642f38dbd6e3763b1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2024-05-08 04:37:33 +00:00
|
|
|
|
Tun: tunDev,
|
|
|
|
|
Dialer: dialer,
|
|
|
|
|
SetSubsystem: sys.Set,
|
|
|
|
|
HealthTracker: sys.HealthTracker(),
|
2022-09-21 18:19:34 +00:00
|
|
|
|
})
|
|
|
|
|
if err != nil {
|
2024-06-13 17:48:45 +00:00
|
|
|
|
tb.Fatal(err)
|
2022-09-21 18:19:34 +00:00
|
|
|
|
}
|
2024-06-13 17:48:45 +00:00
|
|
|
|
tb.Cleanup(func() { eng.Close() })
|
2023-05-03 20:57:17 +00:00
|
|
|
|
sys.Set(eng)
|
2022-09-21 18:19:34 +00:00
|
|
|
|
|
2024-02-02 18:45:32 +00:00
|
|
|
|
ns, err := Create(logf, sys.Tun.Get(), eng, sys.MagicSock.Get(), dialer, sys.DNSManager.Get(), sys.ProxyMapper(), nil)
|
2022-09-21 18:19:34 +00:00
|
|
|
|
if err != nil {
|
2024-06-13 17:48:45 +00:00
|
|
|
|
tb.Fatal(err)
|
2022-09-21 18:19:34 +00:00
|
|
|
|
}
|
2024-06-13 17:48:45 +00:00
|
|
|
|
tb.Cleanup(func() { ns.Close() })
|
2022-09-21 18:19:34 +00:00
|
|
|
|
|
2023-05-03 20:57:17 +00:00
|
|
|
|
lb, err := ipnlocal.NewLocalBackend(logf, logid.PublicID{}, sys, 0)
|
2022-12-23 18:22:39 +00:00
|
|
|
|
if err != nil {
|
2024-06-13 17:48:45 +00:00
|
|
|
|
tb.Fatalf("NewLocalBackend: %v", err)
|
2022-12-23 18:22:39 +00:00
|
|
|
|
}
|
2022-09-21 18:19:34 +00:00
|
|
|
|
|
2022-12-23 18:22:39 +00:00
|
|
|
|
ns.atomicIsLocalIPFunc.Store(func(netip.Addr) bool { return true })
|
|
|
|
|
if config != nil {
|
|
|
|
|
config(ns)
|
|
|
|
|
}
|
|
|
|
|
if err := ns.Start(lb); err != nil {
|
2024-06-13 17:48:45 +00:00
|
|
|
|
tb.Fatalf("Start: %v", err)
|
2022-09-21 18:19:34 +00:00
|
|
|
|
}
|
|
|
|
|
return ns
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func TestShouldHandlePing(t *testing.T) {
|
|
|
|
|
srcIP := netip.AddrFrom4([4]byte{1, 2, 3, 4})
|
|
|
|
|
|
|
|
|
|
t.Run("ICMP4", func(t *testing.T) {
|
|
|
|
|
dst := netip.MustParseAddr("5.6.7.8")
|
|
|
|
|
icmph := packet.ICMP4Header{
|
|
|
|
|
IP4Header: packet.IP4Header{
|
|
|
|
|
IPProto: ipproto.ICMPv4,
|
|
|
|
|
Src: srcIP,
|
|
|
|
|
Dst: dst,
|
|
|
|
|
},
|
|
|
|
|
Type: packet.ICMP4EchoRequest,
|
|
|
|
|
Code: packet.ICMP4NoCode,
|
|
|
|
|
}
|
|
|
|
|
_, payload := packet.ICMPEchoPayload(nil)
|
|
|
|
|
icmpPing := packet.Generate(icmph, payload)
|
|
|
|
|
pkt := &packet.Parsed{}
|
|
|
|
|
pkt.Decode(icmpPing)
|
|
|
|
|
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = true
|
|
|
|
|
})
|
|
|
|
|
pingDst, ok := impl.shouldHandlePing(pkt)
|
|
|
|
|
if !ok {
|
|
|
|
|
t.Errorf("expected shouldHandlePing==true")
|
|
|
|
|
}
|
|
|
|
|
if pingDst != dst {
|
|
|
|
|
t.Errorf("got dst %s; want %s", pingDst, dst)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
t.Run("ICMP6-no-via", func(t *testing.T) {
|
|
|
|
|
dst := netip.MustParseAddr("2a09:8280:1::4169")
|
|
|
|
|
icmph := packet.ICMP6Header{
|
|
|
|
|
IP6Header: packet.IP6Header{
|
|
|
|
|
IPProto: ipproto.ICMPv6,
|
|
|
|
|
Src: srcIP,
|
|
|
|
|
Dst: dst,
|
|
|
|
|
},
|
|
|
|
|
Type: packet.ICMP6EchoRequest,
|
|
|
|
|
Code: packet.ICMP6NoCode,
|
|
|
|
|
}
|
|
|
|
|
_, payload := packet.ICMPEchoPayload(nil)
|
|
|
|
|
icmpPing := packet.Generate(icmph, payload)
|
|
|
|
|
pkt := &packet.Parsed{}
|
|
|
|
|
pkt.Decode(icmpPing)
|
|
|
|
|
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = true
|
|
|
|
|
})
|
|
|
|
|
pingDst, ok := impl.shouldHandlePing(pkt)
|
|
|
|
|
|
|
|
|
|
// Expect that we handle this since it's going out onto the
|
|
|
|
|
// network.
|
|
|
|
|
if !ok {
|
|
|
|
|
t.Errorf("expected shouldHandlePing==true")
|
|
|
|
|
}
|
|
|
|
|
if pingDst != dst {
|
|
|
|
|
t.Errorf("got dst %s; want %s", pingDst, dst)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
t.Run("ICMP6-tailscale-addr", func(t *testing.T) {
|
|
|
|
|
dst := netip.MustParseAddr("fd7a:115c:a1e0:ab12::1")
|
|
|
|
|
icmph := packet.ICMP6Header{
|
|
|
|
|
IP6Header: packet.IP6Header{
|
|
|
|
|
IPProto: ipproto.ICMPv6,
|
|
|
|
|
Src: srcIP,
|
|
|
|
|
Dst: dst,
|
|
|
|
|
},
|
|
|
|
|
Type: packet.ICMP6EchoRequest,
|
|
|
|
|
Code: packet.ICMP6NoCode,
|
|
|
|
|
}
|
|
|
|
|
_, payload := packet.ICMPEchoPayload(nil)
|
|
|
|
|
icmpPing := packet.Generate(icmph, payload)
|
|
|
|
|
pkt := &packet.Parsed{}
|
|
|
|
|
pkt.Decode(icmpPing)
|
|
|
|
|
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = true
|
|
|
|
|
})
|
|
|
|
|
_, ok := impl.shouldHandlePing(pkt)
|
|
|
|
|
|
|
|
|
|
// We don't handle this because it's a Tailscale IP and not 4via6
|
|
|
|
|
if ok {
|
|
|
|
|
t.Errorf("expected shouldHandlePing==false")
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
|
2022-09-21 22:07:57 +00:00
|
|
|
|
// Handle pings for 4via6 addresses regardless of ProcessSubnets
|
|
|
|
|
for _, subnets := range []bool{true, false} {
|
|
|
|
|
t.Run("ICMP6-4via6-ProcessSubnets-"+fmt.Sprint(subnets), func(t *testing.T) {
|
|
|
|
|
// The 4via6 route 10.1.1.0/24 siteid 7, and then the IP
|
|
|
|
|
// 10.1.1.9 within that route.
|
|
|
|
|
dst := netip.MustParseAddr("fd7a:115c:a1e0:b1a:0:7:a01:109")
|
|
|
|
|
expectedPingDst := netip.MustParseAddr("10.1.1.9")
|
|
|
|
|
icmph := packet.ICMP6Header{
|
|
|
|
|
IP6Header: packet.IP6Header{
|
|
|
|
|
IPProto: ipproto.ICMPv6,
|
|
|
|
|
Src: srcIP,
|
|
|
|
|
Dst: dst,
|
|
|
|
|
},
|
|
|
|
|
Type: packet.ICMP6EchoRequest,
|
|
|
|
|
Code: packet.ICMP6NoCode,
|
|
|
|
|
}
|
|
|
|
|
_, payload := packet.ICMPEchoPayload(nil)
|
|
|
|
|
icmpPing := packet.Generate(icmph, payload)
|
|
|
|
|
pkt := &packet.Parsed{}
|
|
|
|
|
pkt.Decode(icmpPing)
|
|
|
|
|
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = subnets
|
|
|
|
|
})
|
|
|
|
|
pingDst, ok := impl.shouldHandlePing(pkt)
|
|
|
|
|
|
|
|
|
|
// Handled due to being 4via6
|
|
|
|
|
if !ok {
|
|
|
|
|
t.Errorf("expected shouldHandlePing==true")
|
|
|
|
|
} else if pingDst != expectedPingDst {
|
|
|
|
|
t.Errorf("got dst %s; want %s", pingDst, expectedPingDst)
|
|
|
|
|
}
|
2022-09-21 18:19:34 +00:00
|
|
|
|
})
|
2022-09-21 22:07:57 +00:00
|
|
|
|
}
|
2022-09-21 18:19:34 +00:00
|
|
|
|
}
|
2022-11-08 21:09:23 +00:00
|
|
|
|
|
2022-11-09 03:53:40 +00:00
|
|
|
|
// looksLikeATailscaleSelfAddress reports whether addr looks like
|
|
|
|
|
// a Tailscale self address, for tests.
|
|
|
|
|
func looksLikeATailscaleSelfAddress(addr netip.Addr) bool {
|
|
|
|
|
return addr.Is4() && tsaddr.IsTailscaleIP(addr) ||
|
|
|
|
|
addr.Is6() && tsaddr.Tailscale4To6Range().Contains(addr)
|
|
|
|
|
}
|
|
|
|
|
|
2022-11-08 21:09:23 +00:00
|
|
|
|
func TestShouldProcessInbound(t *testing.T) {
|
|
|
|
|
testCases := []struct {
|
2022-12-23 18:22:39 +00:00
|
|
|
|
name string
|
|
|
|
|
pkt *packet.Parsed
|
|
|
|
|
afterStart func(*Impl) // optional; after Impl.Start is called
|
|
|
|
|
beforeStart func(*Impl) // optional; before Impl.Start is called
|
|
|
|
|
want bool
|
|
|
|
|
runOnGOOS string
|
2022-11-08 21:09:23 +00:00
|
|
|
|
}{
|
|
|
|
|
{
|
|
|
|
|
name: "ipv6-via",
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 6,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.9/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:109/120
|
|
|
|
|
Dst: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:7:a01:109]:5678"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.0/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:100/120
|
|
|
|
|
netip.MustParsePrefix("fd7a:115c:a1e0:b1a:0:7:a01:100/120"),
|
|
|
|
|
}
|
|
|
|
|
i.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
2022-11-08 21:09:23 +00:00
|
|
|
|
})
|
2022-11-09 03:53:40 +00:00
|
|
|
|
i.atomicIsLocalIPFunc.Store(looksLikeATailscaleSelfAddress)
|
2022-12-23 18:22:39 +00:00
|
|
|
|
},
|
|
|
|
|
beforeStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
// This should be handled even if we're
|
|
|
|
|
// otherwise not processing local IPs or
|
|
|
|
|
// subnets.
|
|
|
|
|
i.ProcessLocalIPs = false
|
|
|
|
|
i.ProcessSubnets = false
|
|
|
|
|
},
|
|
|
|
|
want: true,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "ipv6-via-not-advertised",
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 6,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.9/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:109/120
|
|
|
|
|
Dst: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:7:a01:109]:5678"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
// tailscale debug via 7 10.1.2.0/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:200/120
|
|
|
|
|
netip.MustParsePrefix("fd7a:115c:a1e0:b1a:0:7:a01:200/120"),
|
|
|
|
|
}
|
|
|
|
|
i.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
2022-11-08 21:09:23 +00:00
|
|
|
|
})
|
|
|
|
|
},
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "tailscale-ssh-enabled",
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 4,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
Dst: netip.MustParseAddrPort("100.101.102.104:22"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.RunSSH = true
|
|
|
|
|
i.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
2022-11-08 21:09:23 +00:00
|
|
|
|
})
|
|
|
|
|
i.atomicIsLocalIPFunc.Store(func(addr netip.Addr) bool {
|
|
|
|
|
return addr.String() == "100.101.102.104" // Dst, above
|
|
|
|
|
})
|
|
|
|
|
},
|
2022-11-21 23:11:44 +00:00
|
|
|
|
want: true,
|
|
|
|
|
runOnGOOS: "linux",
|
2022-11-08 21:09:23 +00:00
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "tailscale-ssh-disabled",
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 4,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
Dst: netip.MustParseAddrPort("100.101.102.104:22"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.RunSSH = false // default, but to be explicit
|
|
|
|
|
i.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
2022-11-08 21:09:23 +00:00
|
|
|
|
})
|
|
|
|
|
i.atomicIsLocalIPFunc.Store(func(addr netip.Addr) bool {
|
|
|
|
|
return addr.String() == "100.101.102.104" // Dst, above
|
|
|
|
|
})
|
|
|
|
|
},
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "process-local-ips",
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 4,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
Dst: netip.MustParseAddrPort("100.101.102.104:4567"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
i.ProcessLocalIPs = true
|
|
|
|
|
i.atomicIsLocalIPFunc.Store(func(addr netip.Addr) bool {
|
|
|
|
|
return addr.String() == "100.101.102.104" // Dst, above
|
|
|
|
|
})
|
|
|
|
|
},
|
|
|
|
|
want: true,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "process-subnets",
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 4,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
Dst: netip.MustParseAddrPort("10.1.2.3:4567"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
beforeStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
i.ProcessSubnets = true
|
2022-12-23 18:22:39 +00:00
|
|
|
|
},
|
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
// For testing purposes, assume all Tailscale
|
|
|
|
|
// IPs are local; the Dst above is something
|
|
|
|
|
// not in that range.
|
2022-11-09 03:53:40 +00:00
|
|
|
|
i.atomicIsLocalIPFunc.Store(looksLikeATailscaleSelfAddress)
|
2022-11-08 21:09:23 +00:00
|
|
|
|
},
|
|
|
|
|
want: true,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "peerapi-port-subnet-router", // see #6235
|
|
|
|
|
pkt: &packet.Parsed{
|
|
|
|
|
IPVersion: 4,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("100.101.102.103:1234"),
|
|
|
|
|
Dst: netip.MustParseAddrPort("10.0.0.23:5555"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
},
|
2022-12-23 18:22:39 +00:00
|
|
|
|
beforeStart: func(i *Impl) {
|
|
|
|
|
// As if we were running on Linux where netstack isn't used.
|
|
|
|
|
i.ProcessSubnets = false
|
|
|
|
|
i.atomicIsLocalIPFunc.Store(func(netip.Addr) bool { return false })
|
|
|
|
|
},
|
|
|
|
|
afterStart: func(i *Impl) {
|
2022-11-08 21:09:23 +00:00
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
netip.MustParsePrefix("10.0.0.1/24"),
|
|
|
|
|
}
|
|
|
|
|
i.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
2022-11-08 21:09:23 +00:00
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
// Set the PeerAPI port to the Dst port above.
|
2022-12-22 20:53:56 +00:00
|
|
|
|
i.peerapiPort4Atomic.Store(5555)
|
|
|
|
|
i.peerapiPort6Atomic.Store(5555)
|
2022-11-08 21:09:23 +00:00
|
|
|
|
},
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
|
|
|
|
|
// TODO(andrew): test PeerAPI
|
|
|
|
|
// TODO(andrew): test TCP packets without the SYN flag set
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for _, tc := range testCases {
|
|
|
|
|
t.Run(tc.name, func(t *testing.T) {
|
2022-11-21 23:11:44 +00:00
|
|
|
|
if tc.runOnGOOS != "" && runtime.GOOS != tc.runOnGOOS {
|
|
|
|
|
t.Skipf("skipping on GOOS=%v", runtime.GOOS)
|
|
|
|
|
}
|
2022-12-23 18:22:39 +00:00
|
|
|
|
impl := makeNetstack(t, tc.beforeStart)
|
|
|
|
|
if tc.afterStart != nil {
|
|
|
|
|
tc.afterStart(impl)
|
|
|
|
|
}
|
2022-11-08 21:09:23 +00:00
|
|
|
|
|
|
|
|
|
got := impl.shouldProcessInbound(tc.pkt, nil)
|
|
|
|
|
if got != tc.want {
|
|
|
|
|
t.Errorf("got shouldProcessInbound()=%v; want %v", got, tc.want)
|
|
|
|
|
} else {
|
|
|
|
|
t.Logf("OK: shouldProcessInbound() = %v", got)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
}
|
|
|
|
|
}
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
|
|
|
|
|
func tcp4syn(tb testing.TB, src, dst netip.Addr, sport, dport uint16) []byte {
|
|
|
|
|
ip := header.IPv4(make([]byte, header.IPv4MinimumSize+header.TCPMinimumSize))
|
|
|
|
|
ip.Encode(&header.IPv4Fields{
|
|
|
|
|
Protocol: uint8(header.TCPProtocolNumber),
|
|
|
|
|
TotalLength: header.IPv4MinimumSize + header.TCPMinimumSize,
|
|
|
|
|
TTL: 64,
|
|
|
|
|
SrcAddr: tcpip.AddrFrom4Slice(src.AsSlice()),
|
|
|
|
|
DstAddr: tcpip.AddrFrom4Slice(dst.AsSlice()),
|
|
|
|
|
})
|
|
|
|
|
ip.SetChecksum(^ip.CalculateChecksum())
|
|
|
|
|
if !ip.IsChecksumValid() {
|
|
|
|
|
tb.Fatal("test broken; packet has incorrect IP checksum")
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
tcp := header.TCP(ip[header.IPv4MinimumSize:])
|
|
|
|
|
tcp.Encode(&header.TCPFields{
|
|
|
|
|
SrcPort: sport,
|
|
|
|
|
DstPort: dport,
|
|
|
|
|
SeqNum: 0,
|
|
|
|
|
DataOffset: header.TCPMinimumSize,
|
|
|
|
|
Flags: header.TCPFlagSyn,
|
|
|
|
|
WindowSize: 65535,
|
|
|
|
|
Checksum: 0,
|
|
|
|
|
})
|
|
|
|
|
xsum := header.PseudoHeaderChecksum(
|
|
|
|
|
header.TCPProtocolNumber,
|
|
|
|
|
tcpip.AddrFrom4Slice(src.AsSlice()),
|
|
|
|
|
tcpip.AddrFrom4Slice(dst.AsSlice()),
|
|
|
|
|
uint16(header.TCPMinimumSize),
|
|
|
|
|
)
|
|
|
|
|
tcp.SetChecksum(^tcp.CalculateChecksum(xsum))
|
|
|
|
|
if !tcp.IsChecksumValid(tcpip.AddrFrom4Slice(src.AsSlice()), tcpip.AddrFrom4Slice(dst.AsSlice()), 0, 0) {
|
|
|
|
|
tb.Fatal("test broken; packet has incorrect TCP checksum")
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return ip
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// makeHangDialer returns a dialer that notifies the returned channel when a
|
|
|
|
|
// connection is dialed and then hangs until the test finishes.
|
|
|
|
|
func makeHangDialer(tb testing.TB) (func(context.Context, string, string) (net.Conn, error), chan struct{}) {
|
|
|
|
|
done := make(chan struct{})
|
|
|
|
|
tb.Cleanup(func() {
|
|
|
|
|
close(done)
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
gotConn := make(chan struct{}, 1)
|
|
|
|
|
fn := func(ctx context.Context, network, address string) (net.Conn, error) {
|
|
|
|
|
// Signal that we have a new connection
|
|
|
|
|
tb.Logf("hangDialer: called with network=%q address=%q", network, address)
|
|
|
|
|
select {
|
|
|
|
|
case gotConn <- struct{}{}:
|
|
|
|
|
default:
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Hang until the test is done.
|
|
|
|
|
select {
|
|
|
|
|
case <-ctx.Done():
|
|
|
|
|
tb.Logf("context done")
|
|
|
|
|
case <-done:
|
|
|
|
|
tb.Logf("function completed")
|
|
|
|
|
}
|
|
|
|
|
return nil, fmt.Errorf("canceled")
|
|
|
|
|
}
|
|
|
|
|
return fn, gotConn
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// TestTCPForwardLimits verifies that the limits on the TCP forwarder work in a
|
|
|
|
|
// success case (i.e. when we don't hit the limit).
|
|
|
|
|
func TestTCPForwardLimits(t *testing.T) {
|
|
|
|
|
envknob.Setenv("TS_DEBUG_NETSTACK", "true")
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = true
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
dialFn, gotConn := makeHangDialer(t)
|
|
|
|
|
impl.forwardDialFunc = dialFn
|
|
|
|
|
|
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
// This is the TEST-NET-1 IP block for use in documentation,
|
|
|
|
|
// and should never actually be routable.
|
|
|
|
|
netip.MustParsePrefix("192.0.2.0/24"),
|
|
|
|
|
}
|
|
|
|
|
impl.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
})
|
|
|
|
|
impl.atomicIsLocalIPFunc.Store(looksLikeATailscaleSelfAddress)
|
|
|
|
|
|
|
|
|
|
// Inject an "outbound" packet that's going to an IP address that times
|
|
|
|
|
// out. We need to re-parse from a byte slice so that the internal
|
|
|
|
|
// buffer in the packet.Parsed type is filled out.
|
|
|
|
|
client := netip.MustParseAddr("100.101.102.103")
|
|
|
|
|
destAddr := netip.MustParseAddr("192.0.2.1")
|
|
|
|
|
pkt := tcp4syn(t, client, destAddr, 1234, 4567)
|
|
|
|
|
var parsed packet.Parsed
|
|
|
|
|
parsed.Decode(pkt)
|
|
|
|
|
|
|
|
|
|
// When injecting this packet, we want the outcome to be "drop
|
|
|
|
|
// silently", which indicates that netstack is processing the
|
|
|
|
|
// packet and not delivering it to the host system.
|
2024-08-20 22:22:19 +00:00
|
|
|
|
if resp, _ := impl.injectInbound(&parsed, impl.tundev, nil); resp != filter.DropSilently {
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
t.Errorf("got filter outcome %v, want filter.DropSilently", resp)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
|
|
|
|
|
defer cancel()
|
|
|
|
|
|
|
|
|
|
// Wait until we have an in-flight outgoing connection.
|
|
|
|
|
select {
|
|
|
|
|
case <-ctx.Done():
|
|
|
|
|
t.Fatalf("timed out waiting for connection")
|
|
|
|
|
case <-gotConn:
|
|
|
|
|
t.Logf("got connection in progress")
|
|
|
|
|
}
|
|
|
|
|
|
2024-02-29 04:21:31 +00:00
|
|
|
|
// Inject another packet, which will be deduplicated and thus not
|
|
|
|
|
// increment our counter.
|
|
|
|
|
parsed.Decode(pkt)
|
2024-08-20 22:22:19 +00:00
|
|
|
|
if resp, _ := impl.injectInbound(&parsed, impl.tundev, nil); resp != filter.DropSilently {
|
2024-02-29 04:21:31 +00:00
|
|
|
|
t.Errorf("got filter outcome %v, want filter.DropSilently", resp)
|
|
|
|
|
}
|
|
|
|
|
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
// Verify that we now have a single in-flight address in our map.
|
|
|
|
|
impl.mu.Lock()
|
|
|
|
|
inFlight := maps.Clone(impl.connsInFlightByClient)
|
|
|
|
|
impl.mu.Unlock()
|
|
|
|
|
|
|
|
|
|
if got, ok := inFlight[client]; !ok || got != 1 {
|
|
|
|
|
t.Errorf("expected 1 in-flight connection for %v, got: %v", client, inFlight)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Get the expvar statistics and verify that we're exporting the
|
|
|
|
|
// correct metric.
|
|
|
|
|
metrics := impl.ExpVar().(*metrics.Set)
|
|
|
|
|
|
|
|
|
|
const metricName = "gauge_tcp_forward_in_flight"
|
|
|
|
|
if v := metrics.Get(metricName).String(); v != "1" {
|
|
|
|
|
t.Errorf("got metric %q=%s, want 1", metricName, v)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// TestTCPForwardLimits_PerClient verifies that the per-client limit for TCP
|
|
|
|
|
// forwarding works.
|
|
|
|
|
func TestTCPForwardLimits_PerClient(t *testing.T) {
|
|
|
|
|
envknob.Setenv("TS_DEBUG_NETSTACK", "true")
|
|
|
|
|
|
|
|
|
|
// Set our test override limits during this test.
|
|
|
|
|
tstest.Replace(t, &maxInFlightConnectionAttemptsForTest, 2)
|
|
|
|
|
tstest.Replace(t, &maxInFlightConnectionAttemptsPerClientForTest, 1)
|
|
|
|
|
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = true
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
dialFn, gotConn := makeHangDialer(t)
|
|
|
|
|
impl.forwardDialFunc = dialFn
|
|
|
|
|
|
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
// This is the TEST-NET-1 IP block for use in documentation,
|
|
|
|
|
// and should never actually be routable.
|
|
|
|
|
netip.MustParsePrefix("192.0.2.0/24"),
|
|
|
|
|
}
|
|
|
|
|
impl.lb.Start(ipn.Options{
|
2024-04-16 04:40:21 +00:00
|
|
|
|
UpdatePrefs: prefs,
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
})
|
|
|
|
|
impl.atomicIsLocalIPFunc.Store(looksLikeATailscaleSelfAddress)
|
|
|
|
|
|
|
|
|
|
// Inject an "outbound" packet that's going to an IP address that times
|
|
|
|
|
// out. We need to re-parse from a byte slice so that the internal
|
|
|
|
|
// buffer in the packet.Parsed type is filled out.
|
|
|
|
|
client := netip.MustParseAddr("100.101.102.103")
|
|
|
|
|
destAddr := netip.MustParseAddr("192.0.2.1")
|
|
|
|
|
|
|
|
|
|
// Helpers
|
2024-02-29 04:21:31 +00:00
|
|
|
|
var port uint16 = 1234
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
mustInjectPacket := func() {
|
2024-02-29 04:21:31 +00:00
|
|
|
|
pkt := tcp4syn(t, client, destAddr, port, 4567)
|
|
|
|
|
port++ // to avoid deduplication based on endpoint
|
|
|
|
|
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
var parsed packet.Parsed
|
|
|
|
|
parsed.Decode(pkt)
|
|
|
|
|
|
|
|
|
|
// When injecting this packet, we want the outcome to be "drop
|
|
|
|
|
// silently", which indicates that netstack is processing the
|
|
|
|
|
// packet and not delivering it to the host system.
|
2024-08-20 22:22:19 +00:00
|
|
|
|
if resp, _ := impl.injectInbound(&parsed, impl.tundev, nil); resp != filter.DropSilently {
|
wgengine/netstack: add a per-client limit for in-flight TCP forwards
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
2024-02-26 20:06:47 +00:00
|
|
|
|
t.Fatalf("got filter outcome %v, want filter.DropSilently", resp)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ctx, cancel := context.WithTimeout(context.Background(), 10*time.Second)
|
|
|
|
|
defer cancel()
|
|
|
|
|
|
|
|
|
|
waitPacket := func() {
|
|
|
|
|
select {
|
|
|
|
|
case <-ctx.Done():
|
|
|
|
|
t.Fatalf("timed out waiting for connection")
|
|
|
|
|
case <-gotConn:
|
|
|
|
|
t.Logf("got connection in progress")
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Inject the packet to start the TCP forward and wait until we have an
|
|
|
|
|
// in-flight outgoing connection.
|
|
|
|
|
mustInjectPacket()
|
|
|
|
|
waitPacket()
|
|
|
|
|
|
|
|
|
|
// Verify that we now have a single in-flight address in our map.
|
|
|
|
|
impl.mu.Lock()
|
|
|
|
|
inFlight := maps.Clone(impl.connsInFlightByClient)
|
|
|
|
|
impl.mu.Unlock()
|
|
|
|
|
|
|
|
|
|
if got, ok := inFlight[client]; !ok || got != 1 {
|
|
|
|
|
t.Errorf("expected 1 in-flight connection for %v, got: %v", client, inFlight)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
metrics := impl.ExpVar().(*metrics.Set)
|
|
|
|
|
|
|
|
|
|
// One client should have reached the limit at this point.
|
|
|
|
|
if v := metrics.Get("gauge_tcp_forward_in_flight_per_client_limit_reached").String(); v != "1" {
|
|
|
|
|
t.Errorf("got limit reached expvar metric=%s, want 1", v)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Inject another packet, and verify that we've incremented our
|
|
|
|
|
// "dropped" metrics since this will have been dropped.
|
|
|
|
|
mustInjectPacket()
|
|
|
|
|
|
|
|
|
|
// expvar metric
|
|
|
|
|
const metricName = "counter_tcp_forward_max_in_flight_per_client_drop"
|
|
|
|
|
if v := metrics.Get(metricName).String(); v != "1" {
|
|
|
|
|
t.Errorf("got expvar metric %q=%s, want 1", metricName, v)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// client metric
|
|
|
|
|
if v := metricPerClientForwardLimit.Value(); v != 1 {
|
|
|
|
|
t.Errorf("got clientmetric limit metric=%d, want 1", v)
|
|
|
|
|
}
|
|
|
|
|
}
|
2024-05-05 22:00:19 +00:00
|
|
|
|
|
|
|
|
|
// TestHandleLocalPackets tests the handleLocalPackets function, ensuring that
|
|
|
|
|
// we are properly deciding to handle packets that are destined for "local"
|
|
|
|
|
// IPs–addresses that are either for this node, or that it is responsible for.
|
|
|
|
|
//
|
|
|
|
|
// See, e.g. #11304
|
|
|
|
|
func TestHandleLocalPackets(t *testing.T) {
|
|
|
|
|
var (
|
|
|
|
|
selfIP4 = netip.MustParseAddr("100.64.1.2")
|
|
|
|
|
selfIP6 = netip.MustParseAddr("fd7a:115c:a1e0::123")
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
impl := makeNetstack(t, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = false
|
|
|
|
|
impl.ProcessLocalIPs = false
|
|
|
|
|
impl.atomicIsLocalIPFunc.Store(func(addr netip.Addr) bool {
|
|
|
|
|
return addr == selfIP4 || addr == selfIP6
|
|
|
|
|
})
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.0/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:100/120
|
|
|
|
|
netip.MustParsePrefix("fd7a:115c:a1e0:b1a:0:7:a01:100/120"),
|
|
|
|
|
}
|
|
|
|
|
_, err := impl.lb.EditPrefs(&ipn.MaskedPrefs{
|
|
|
|
|
Prefs: *prefs,
|
|
|
|
|
AdvertiseRoutesSet: true,
|
|
|
|
|
})
|
|
|
|
|
if err != nil {
|
|
|
|
|
t.Fatalf("EditPrefs: %v", err)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
t.Run("ShouldHandleServiceIP", func(t *testing.T) {
|
|
|
|
|
pkt := &packet.Parsed{
|
|
|
|
|
IPVersion: 4,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("127.0.0.1:9999"),
|
|
|
|
|
Dst: netip.MustParseAddrPort("100.100.100.100:53"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
}
|
2024-08-29 18:37:48 +00:00
|
|
|
|
resp, _ := impl.handleLocalPackets(pkt, impl.tundev, nil)
|
2024-05-05 22:00:19 +00:00
|
|
|
|
if resp != filter.DropSilently {
|
|
|
|
|
t.Errorf("got filter outcome %v, want filter.DropSilently", resp)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
t.Run("ShouldHandle4via6", func(t *testing.T) {
|
|
|
|
|
pkt := &packet.Parsed{
|
|
|
|
|
IPVersion: 6,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("[::1]:1234"),
|
|
|
|
|
|
|
|
|
|
// This is an IP in the above 4via6 subnet that this node handles.
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.9/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:109/120
|
|
|
|
|
Dst: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:7:a01:109]:5678"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
}
|
2024-08-29 18:37:48 +00:00
|
|
|
|
resp, _ := impl.handleLocalPackets(pkt, impl.tundev, nil)
|
2024-05-05 22:00:19 +00:00
|
|
|
|
|
|
|
|
|
// DropSilently is the outcome we expected, since we actually
|
|
|
|
|
// handled this packet by injecting it into netstack, which
|
|
|
|
|
// will handle creating the TCP forwarder. We drop it so we
|
|
|
|
|
// don't process the packet outside of netstack.
|
|
|
|
|
if resp != filter.DropSilently {
|
|
|
|
|
t.Errorf("got filter outcome %v, want filter.DropSilently", resp)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
t.Run("OtherNonHandled", func(t *testing.T) {
|
|
|
|
|
pkt := &packet.Parsed{
|
|
|
|
|
IPVersion: 6,
|
|
|
|
|
IPProto: ipproto.TCP,
|
|
|
|
|
Src: netip.MustParseAddrPort("[::1]:1234"),
|
|
|
|
|
|
|
|
|
|
// This IP is *not* in the above 4via6 route
|
|
|
|
|
// $ tailscale debug via 99 10.1.1.9/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:63:a01:109/120
|
|
|
|
|
Dst: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:63:a01:109]:5678"),
|
|
|
|
|
TCPFlags: packet.TCPSyn,
|
|
|
|
|
}
|
2024-08-29 18:37:48 +00:00
|
|
|
|
resp, _ := impl.handleLocalPackets(pkt, impl.tundev, nil)
|
2024-05-05 22:00:19 +00:00
|
|
|
|
|
|
|
|
|
// Accept means that handleLocalPackets does not handle this
|
|
|
|
|
// packet, we "accept" it to continue further processing,
|
|
|
|
|
// instead of dropping because it was already handled.
|
|
|
|
|
if resp != filter.Accept {
|
|
|
|
|
t.Errorf("got filter outcome %v, want filter.Accept", resp)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
}
|
2024-06-13 17:48:45 +00:00
|
|
|
|
|
|
|
|
|
func TestShouldSendToHost(t *testing.T) {
|
|
|
|
|
var (
|
|
|
|
|
selfIP4 = netip.MustParseAddr("100.64.1.2")
|
|
|
|
|
selfIP6 = netip.MustParseAddr("fd7a:115c:a1e0::123")
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
makeTestNetstack := func(tb testing.TB) *Impl {
|
|
|
|
|
impl := makeNetstack(tb, func(impl *Impl) {
|
|
|
|
|
impl.ProcessSubnets = false
|
|
|
|
|
impl.ProcessLocalIPs = false
|
|
|
|
|
impl.atomicIsLocalIPFunc.Store(func(addr netip.Addr) bool {
|
|
|
|
|
return addr == selfIP4 || addr == selfIP6
|
|
|
|
|
})
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
prefs := ipn.NewPrefs()
|
|
|
|
|
prefs.AdvertiseRoutes = []netip.Prefix{
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.0/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:100/120
|
|
|
|
|
netip.MustParsePrefix("fd7a:115c:a1e0:b1a:0:7:a01:100/120"),
|
|
|
|
|
}
|
|
|
|
|
_, err := impl.lb.EditPrefs(&ipn.MaskedPrefs{
|
|
|
|
|
Prefs: *prefs,
|
|
|
|
|
AdvertiseRoutesSet: true,
|
|
|
|
|
})
|
|
|
|
|
if err != nil {
|
|
|
|
|
tb.Fatalf("EditPrefs: %v", err)
|
|
|
|
|
}
|
|
|
|
|
return impl
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
testCases := []struct {
|
|
|
|
|
name string
|
|
|
|
|
src, dst netip.AddrPort
|
|
|
|
|
want bool
|
|
|
|
|
}{
|
|
|
|
|
// Reply from service IP to localhost should be sent to host,
|
|
|
|
|
// not over WireGuard.
|
|
|
|
|
{
|
|
|
|
|
name: "from_service_ip_to_localhost",
|
|
|
|
|
src: netip.AddrPortFrom(serviceIP, 53),
|
|
|
|
|
dst: netip.MustParseAddrPort("127.0.0.1:9999"),
|
|
|
|
|
want: true,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "from_service_ip_to_localhost_v6",
|
|
|
|
|
src: netip.AddrPortFrom(serviceIPv6, 53),
|
|
|
|
|
dst: netip.MustParseAddrPort("[::1]:9999"),
|
|
|
|
|
want: true,
|
|
|
|
|
},
|
|
|
|
|
// A reply from the local IP to a remote host isn't sent to the
|
|
|
|
|
// host, but rather over WireGuard.
|
|
|
|
|
{
|
|
|
|
|
name: "local_ip_to_remote",
|
|
|
|
|
src: netip.AddrPortFrom(selfIP4, 12345),
|
|
|
|
|
dst: netip.MustParseAddrPort("100.64.99.88:7777"),
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "local_ip_to_remote_v6",
|
|
|
|
|
src: netip.AddrPortFrom(selfIP6, 12345),
|
|
|
|
|
dst: netip.MustParseAddrPort("[fd7a:115:a1e0::99]:7777"),
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
// A reply from a 4via6 address to a remote host isn't sent to
|
|
|
|
|
// the local host, but rather over WireGuard. See:
|
|
|
|
|
// https://github.com/tailscale/tailscale/issues/12448
|
|
|
|
|
{
|
|
|
|
|
name: "4via6_to_remote",
|
|
|
|
|
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.99/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:163/120
|
|
|
|
|
src: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:7:a01:163]:12345"),
|
|
|
|
|
dst: netip.MustParseAddrPort("[fd7a:115:a1e0::99]:7777"),
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
// However, a reply from a 4via6 address to the local Tailscale
|
|
|
|
|
// IP for this host *is* sent to the local host. See:
|
|
|
|
|
// https://github.com/tailscale/tailscale/issues/11304
|
|
|
|
|
{
|
|
|
|
|
name: "4via6_to_local",
|
|
|
|
|
|
|
|
|
|
// $ tailscale debug via 7 10.1.1.99/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:163/120
|
|
|
|
|
src: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:7:a01:163]:12345"),
|
|
|
|
|
dst: netip.AddrPortFrom(selfIP6, 7777),
|
|
|
|
|
want: true,
|
|
|
|
|
},
|
|
|
|
|
// Traffic from a 4via6 address that we're not handling to
|
|
|
|
|
// either the local Tailscale IP or a remote host is sent
|
|
|
|
|
// outbound.
|
|
|
|
|
//
|
|
|
|
|
// In most cases, we won't see this type of traffic in the
|
|
|
|
|
// shouldSendToHost function, but let's confirm.
|
|
|
|
|
{
|
|
|
|
|
name: "other_4via6_to_local",
|
|
|
|
|
|
|
|
|
|
// $ tailscale debug via 4444 10.1.1.88/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:163/120
|
|
|
|
|
src: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:115c:a01:158]:12345"),
|
|
|
|
|
dst: netip.AddrPortFrom(selfIP6, 7777),
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
name: "other_4via6_to_remote",
|
|
|
|
|
|
|
|
|
|
// $ tailscale debug via 4444 10.1.1.88/24
|
|
|
|
|
// fd7a:115c:a1e0:b1a:0:7:a01:163/120
|
|
|
|
|
src: netip.MustParseAddrPort("[fd7a:115c:a1e0:b1a:0:115c:a01:158]:12345"),
|
|
|
|
|
dst: netip.MustParseAddrPort("[fd7a:115:a1e0::99]:7777"),
|
|
|
|
|
want: false,
|
|
|
|
|
},
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for _, tt := range testCases {
|
|
|
|
|
t.Run(tt.name, func(t *testing.T) {
|
|
|
|
|
var pkt *stack.PacketBuffer
|
|
|
|
|
if tt.src.Addr().Is4() {
|
|
|
|
|
pkt = makeUDP4PacketBuffer(tt.src, tt.dst)
|
|
|
|
|
} else {
|
|
|
|
|
pkt = makeUDP6PacketBuffer(tt.src, tt.dst)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ns := makeTestNetstack(t)
|
|
|
|
|
if got := ns.shouldSendToHost(pkt); got != tt.want {
|
|
|
|
|
t.Errorf("shouldSendToHost returned %v, want %v", got, tt.want)
|
|
|
|
|
}
|
|
|
|
|
})
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func makeUDP4PacketBuffer(src, dst netip.AddrPort) *stack.PacketBuffer {
|
|
|
|
|
if !src.Addr().Is4() || !dst.Addr().Is4() {
|
|
|
|
|
panic("src and dst must be IPv4")
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
data := []byte("hello world\n")
|
|
|
|
|
|
|
|
|
|
packetLen := header.IPv4MinimumSize + header.UDPMinimumSize
|
|
|
|
|
pkt := stack.NewPacketBuffer(stack.PacketBufferOptions{
|
|
|
|
|
ReserveHeaderBytes: packetLen,
|
|
|
|
|
Payload: buffer.MakeWithData(data),
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
// Initialize the UDP header.
|
|
|
|
|
udp := header.UDP(pkt.TransportHeader().Push(header.UDPMinimumSize))
|
|
|
|
|
pkt.TransportProtocolNumber = header.UDPProtocolNumber
|
|
|
|
|
|
|
|
|
|
length := uint16(pkt.Size())
|
|
|
|
|
udp.Encode(&header.UDPFields{
|
|
|
|
|
SrcPort: src.Port(),
|
|
|
|
|
DstPort: dst.Port(),
|
|
|
|
|
Length: length,
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
// Add IP header
|
|
|
|
|
ipHdr := header.IPv4(pkt.NetworkHeader().Push(header.IPv4MinimumSize))
|
|
|
|
|
pkt.NetworkProtocolNumber = header.IPv4ProtocolNumber
|
|
|
|
|
ipHdr.Encode(&header.IPv4Fields{
|
|
|
|
|
TotalLength: uint16(packetLen),
|
|
|
|
|
Protocol: uint8(header.UDPProtocolNumber),
|
|
|
|
|
SrcAddr: tcpip.AddrFrom4(src.Addr().As4()),
|
|
|
|
|
DstAddr: tcpip.AddrFrom4(dst.Addr().As4()),
|
|
|
|
|
Checksum: 0,
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
return pkt
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func makeUDP6PacketBuffer(src, dst netip.AddrPort) *stack.PacketBuffer {
|
|
|
|
|
if !src.Addr().Is6() || !dst.Addr().Is6() {
|
|
|
|
|
panic("src and dst must be IPv6")
|
|
|
|
|
}
|
|
|
|
|
data := []byte("hello world\n")
|
|
|
|
|
|
|
|
|
|
packetLen := header.IPv6MinimumSize + header.UDPMinimumSize
|
|
|
|
|
pkt := stack.NewPacketBuffer(stack.PacketBufferOptions{
|
|
|
|
|
ReserveHeaderBytes: packetLen,
|
|
|
|
|
Payload: buffer.MakeWithData(data),
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
srcAddr := tcpip.AddrFrom16(src.Addr().As16())
|
|
|
|
|
dstAddr := tcpip.AddrFrom16(dst.Addr().As16())
|
|
|
|
|
|
|
|
|
|
// Add IP header
|
|
|
|
|
ipHdr := header.IPv6(pkt.NetworkHeader().Push(header.IPv6MinimumSize))
|
|
|
|
|
pkt.NetworkProtocolNumber = header.IPv6ProtocolNumber
|
|
|
|
|
ipHdr.Encode(&header.IPv6Fields{
|
|
|
|
|
SrcAddr: srcAddr,
|
|
|
|
|
DstAddr: dstAddr,
|
|
|
|
|
PayloadLength: uint16(header.UDPMinimumSize + len(data)),
|
|
|
|
|
TransportProtocol: header.UDPProtocolNumber,
|
|
|
|
|
HopLimit: 64,
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
// Initialize the UDP header.
|
|
|
|
|
udp := header.UDP(pkt.TransportHeader().Push(header.UDPMinimumSize))
|
|
|
|
|
pkt.TransportProtocolNumber = header.UDPProtocolNumber
|
|
|
|
|
|
|
|
|
|
length := uint16(pkt.Size())
|
|
|
|
|
udp.Encode(&header.UDPFields{
|
|
|
|
|
SrcPort: src.Port(),
|
|
|
|
|
DstPort: dst.Port(),
|
|
|
|
|
Length: length,
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
// Calculate the UDP pseudo-header checksum.
|
|
|
|
|
xsum := header.PseudoHeaderChecksum(header.UDPProtocolNumber, srcAddr, dstAddr, uint16(len(udp)))
|
|
|
|
|
udp.SetChecksum(^udp.CalculateChecksum(xsum))
|
|
|
|
|
|
|
|
|
|
return pkt
|
|
|
|
|
}
|