tailscale/wgengine/magicsock/magicsock_linux.go

321 lines
9.6 KiB
Go
Raw Normal View History

// Copyright (c) 2022 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package magicsock
import (
"bytes"
"encoding/binary"
"errors"
"fmt"
"io"
"net"
"net/netip"
"syscall"
"time"
"unsafe"
"golang.org/x/net/bpf"
"golang.org/x/sys/unix"
"tailscale.com/envknob"
"tailscale.com/net/netns"
"tailscale.com/types/key"
"tailscale.com/types/logger"
"tailscale.com/types/nettype"
)
const (
udpHeaderSize = 8
ipv6FragmentHeaderSize = 8
)
// Enable/disable using raw sockets to receive disco traffic.
var debugDisableRawDisco = envknob.RegisterBool("TS_DEBUG_DISABLE_RAW_DISCO")
// These are our BPF filters that we use for testing packets.
var (
magicsockFilterV4 = []bpf.Instruction{
// For raw UDPv4 sockets, BPF receives the entire IP packet to
// inspect.
// Disco packets are so small they should never get
// fragmented, and we don't want to handle reassembly.
bpf.LoadAbsolute{Off: 6, Size: 2},
// More Fragments bit set means this is part of a fragmented packet.
bpf.JumpIf{Cond: bpf.JumpBitsSet, Val: 0x2000, SkipTrue: 7, SkipFalse: 0},
// Non-zero fragment offset with MF=0 means this is the last
// fragment of packet.
bpf.JumpIf{Cond: bpf.JumpBitsSet, Val: 0x1fff, SkipTrue: 6, SkipFalse: 0},
// Load IP header length into X register.
bpf.LoadMemShift{Off: 0},
// Get the first 4 bytes of the UDP packet, compare with our magic number
bpf.LoadIndirect{Off: udpHeaderSize, Size: 4},
bpf.JumpIf{Cond: bpf.JumpEqual, Val: discoMagic1, SkipTrue: 0, SkipFalse: 3},
// Compare the next 2 bytes
bpf.LoadIndirect{Off: udpHeaderSize + 4, Size: 2},
bpf.JumpIf{Cond: bpf.JumpEqual, Val: uint32(discoMagic2), SkipTrue: 0, SkipFalse: 1},
// Accept the whole packet
bpf.RetConstant{Val: 0xFFFFFFFF},
// Skip the packet
bpf.RetConstant{Val: 0x0},
}
// IPv6 is more complicated to filter, since we can have 0-to-N
// extension headers following the IPv6 header. Since BPF can't
// loop, we can't really parse these in a general way; instead, we
// simply handle the case where we have no extension headers; any
// packets with headers will be skipped. IPv6 extension headers
// are sufficiently uncommon that we're willing to accept false
// negatives here.
//
// The "proper" way to handle this would be to do minimal parsing in
// BPF and more in-depth parsing of all IPv6 packets in userspace, but
// on systems with a high volume of UDP that would be unacceptably slow
// and thus we'd rather be conservative here and possibly not receive
// disco packets rather than slow down the system.
magicsockFilterV6 = []bpf.Instruction{
// For raw UDPv6 sockets, BPF receives _only_ the UDP header onwards, not an entire IP packet.
//
// https://stackoverflow.com/questions/24514333/using-bpf-with-sock-dgram-on-linux-machine
// https://blog.cloudflare.com/epbf_sockets_hop_distance/
//
// This is especially confusing because this *isn't* true for
// IPv4; see the following code from the 'ping' utility that
// corroborates this:
//
// https://github.com/iputils/iputils/blob/1ab5fa/ping/ping.c#L1667-L1676
// https://github.com/iputils/iputils/blob/1ab5fa/ping/ping6_common.c#L933-L941
// Compare with our magic number. Start by loading and
// comparing the first 4 bytes of the UDP payload.
bpf.LoadAbsolute{Off: udpHeaderSize, Size: 4},
bpf.JumpIf{Cond: bpf.JumpEqual, Val: discoMagic1, SkipTrue: 0, SkipFalse: 3},
// Compare the next 2 bytes
bpf.LoadAbsolute{Off: udpHeaderSize + 4, Size: 2},
bpf.JumpIf{Cond: bpf.JumpEqual, Val: discoMagic2, SkipTrue: 0, SkipFalse: 1},
// Accept the whole packet
bpf.RetConstant{Val: 0xFFFFFFFF},
// Skip the packet
bpf.RetConstant{Val: 0x0},
}
testDiscoPacket = []byte{
// Disco magic
0x54, 0x53, 0xf0, 0x9f, 0x92, 0xac,
// Sender key
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
// Nonce
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
}
)
// listenRawDisco starts listening for disco packets on the given
// address family, which must be "ip4" or "ip6", using a raw socket
// and BPF filter.
// https://github.com/tailscale/tailscale/issues/3824
func (c *Conn) listenRawDisco(family string) (io.Closer, error) {
if debugDisableRawDisco() {
return nil, errors.New("raw disco listening disabled by debug flag")
}
// https://github.com/tailscale/tailscale/issues/5607
if !netns.UseSocketMark() {
return nil, errors.New("raw disco listening disabled, SO_MARK unavailable")
}
var (
network string
addr string
testAddr string
prog []bpf.Instruction
)
switch family {
case "ip4":
network = "ip4:17"
addr = "0.0.0.0"
testAddr = "127.0.0.1:1"
prog = magicsockFilterV4
case "ip6":
network = "ip6:17"
addr = "::"
testAddr = "[::1]:1"
prog = magicsockFilterV6
default:
return nil, fmt.Errorf("unsupported address family %q", family)
}
asm, err := bpf.Assemble(prog)
if err != nil {
return nil, fmt.Errorf("assembling filter: %w", err)
}
pc, err := net.ListenPacket(network, addr)
if err != nil {
return nil, fmt.Errorf("creating packet conn: %w", err)
}
if err := setBPF(pc, asm); err != nil {
pc.Close()
return nil, fmt.Errorf("installing BPF filter: %w", err)
}
// If all the above succeeds, we should be ready to receive. Just
// out of paranoia, check that we do receive a well-formed disco
// packet.
tc, err := net.ListenPacket("udp", net.JoinHostPort(addr, "0"))
if err != nil {
pc.Close()
return nil, fmt.Errorf("creating disco test socket: %w", err)
}
defer tc.Close()
if _, err := tc.(*net.UDPConn).WriteToUDPAddrPort(testDiscoPacket, netip.MustParseAddrPort(testAddr)); err != nil {
pc.Close()
return nil, fmt.Errorf("writing disco test packet: %w", err)
}
pc.SetReadDeadline(time.Now().Add(100 * time.Millisecond))
var buf [1500]byte
for {
n, _, err := pc.ReadFrom(buf[:])
if err != nil {
pc.Close()
return nil, fmt.Errorf("reading during raw disco self-test: %w", err)
}
if n < udpHeaderSize {
continue
}
if !bytes.Equal(buf[udpHeaderSize:n], testDiscoPacket) {
continue
}
break
}
pc.SetReadDeadline(time.Time{})
go c.receiveDisco(pc, family == "ip6")
return pc, nil
}
func (c *Conn) receiveDisco(pc net.PacketConn, isIPV6 bool) {
var buf [1500]byte
for {
n, src, err := pc.ReadFrom(buf[:])
if errors.Is(err, net.ErrClosed) {
return
} else if err != nil {
c.logf("disco raw reader failed: %v", err)
return
}
if n < udpHeaderSize {
// Too small to be a valid UDP datagram, drop.
continue
}
dstPort := binary.BigEndian.Uint16(buf[2:4])
if dstPort == 0 {
c.logf("[unexpected] disco raw: received packet for port 0")
}
var acceptPort uint16
if isIPV6 {
acceptPort = c.pconn6.Port()
} else {
acceptPort = c.pconn4.Port()
}
if acceptPort == 0 {
// This should only typically happen if the receiving address family
// was recently disabled.
c.dlogf("[v1] disco raw: dropping packet for port %d as acceptPort=0", dstPort)
continue
}
if dstPort != acceptPort {
c.dlogf("[v1] disco raw: dropping packet for port %d", dstPort)
continue
}
srcIP, ok := netip.AddrFromSlice(src.(*net.IPAddr).IP)
if !ok {
c.logf("[unexpected] PacketConn.ReadFrom returned not-an-IP %v in from", src)
continue
}
srcPort := binary.BigEndian.Uint16(buf[:2])
if srcIP.Is4() {
metricRecvDiscoPacketIPv4.Add(1)
} else {
metricRecvDiscoPacketIPv6.Add(1)
}
c.handleDiscoMessage(buf[udpHeaderSize:n], netip.AddrPortFrom(srcIP, srcPort), key.NodePublic{})
}
}
// setBPF installs filter as the BPF filter on conn.
// Ideally we would just use SetBPF as implemented in x/net/ipv4,
// but x/net/ipv6 doesn't implement it. And once you've written
// this code once, it turns out to be address family agnostic, so
// we might as well use it on both and get to use a net.PacketConn
// directly for both families instead of being stuck with
// different types.
func setBPF(conn net.PacketConn, filter []bpf.RawInstruction) error {
sc, err := conn.(*net.IPConn).SyscallConn()
if err != nil {
return err
}
prog := &unix.SockFprog{
Len: uint16(len(filter)),
Filter: (*unix.SockFilter)(unsafe.Pointer(&filter[0])),
}
var setErr error
err = sc.Control(func(fd uintptr) {
setErr = unix.SetsockoptSockFprog(int(fd), unix.SOL_SOCKET, unix.SO_ATTACH_FILTER, prog)
})
if err != nil {
return err
}
if setErr != nil {
return err
}
return nil
}
// trySetSocketBuffer attempts to set SO_SNDBUFFORCE and SO_RECVBUFFORCE which
// can overcome the limit of net.core.{r,w}mem_max, but require CAP_NET_ADMIN.
// It falls back to the portable implementation if that fails, which may be
// silently capped to net.core.{r,w}mem_max.
func trySetSocketBuffer(pconn nettype.PacketConn, logf logger.Logf) {
if c, ok := pconn.(*net.UDPConn); ok {
var errRcv, errSnd error
rc, err := c.SyscallConn()
if err == nil {
rc.Control(func(fd uintptr) {
errRcv = syscall.SetsockoptInt(int(fd), syscall.SOL_SOCKET, syscall.SO_RCVBUFFORCE, socketBufferSize)
if errRcv != nil {
logf("magicsock: failed to force-set UDP read buffer size to %d: %v", socketBufferSize, errRcv)
}
errSnd = syscall.SetsockoptInt(int(fd), syscall.SOL_SOCKET, syscall.SO_SNDBUFFORCE, socketBufferSize)
if errSnd != nil {
logf("magicsock: failed to force-set UDP write buffer size to %d: %v", socketBufferSize, errSnd)
}
})
}
if err != nil || errRcv != nil || errSnd != nil {
portableTrySetSocketBuffer(pconn, logf)
}
}
}