wgengine/router: use quad-100 as the nexthop on Windows

Windows requires routes to have a nexthop. Routes created using the interface's local IP address or an unspecified IP address ("0.0.0.0" or "::") as the nexthop are considered on-link routes. Notably, Windows treats on-link subnet routes differently, reserving the last IP in the range as the broadcast IP and therefore prohibiting TCP connections to it, resulting in WSA error 10049: "The requested address is not valid in its context. This does not happen with single-host routes, such as routes to Tailscale IP addresses, but becomes a problem with advertised subnets when all IPs in the range should be reachable.

Before Windows 8, only routes created with an unspecified IP address were considered on-link, so our previous approach of using the interface's own IP as the nexthop likely worked on Windows 7.

This PR updates configureInterface to use the TailscaleServiceIP (100.100.100.100) and its IPv6 counterpart as the nexthop for subnet routes.

Fixes tailscale/support-escalations#57

Signed-off-by: Nick Khyl <nickk@tailscale.com>

wgengine/router/ifconfig_windows.go

@@ -320,12 +320,24 @@ func configureInterface(cfg *Config, tun *tun.NativeTun, ht *health.Tracker) (re
 		ipif6 = nil
 	}
 
-	// Windows requires routes to have a nexthop. For routes such as
-	// ours where the nexthop is meaningless, you're supposed to use
-	// one of the local IP addresses of the interface. Find an IPv4
-	// and IPv6 address we can use for this purpose.
-	var firstGateway4 netip.Addr
-	var firstGateway6 netip.Addr
+	// Windows requires routes to have a nexthop. Routes created using
+	// the interface's local IP address or an unspecified IP address
+	// ("0.0.0.0" or "::") as the nexthop are considered on-link routes.
+	//
+	// Notably, Windows treats on-link subnet routes differently, reserving the last
+	// IP in the range as the broadcast IP and therefore prohibiting TCP connections
+	// to it, resulting in WSA error 10049: "The requested address is not valid in its context."
+	// This does not happen with single-host routes, such as routes to Tailscale IP addresses,
+	// but becomes a problem with advertised subnets when all IPs in the range should be reachable.
+	// See https://github.com/tailscale/support-escalations/issues/57 for details.
+	//
+	// For routes such as ours where the nexthop is meaningless, we can use an
+	// arbitrary nexthop address, such as TailscaleServiceIP, to prevent the
+	// routes from being marked as on-link. We can still create on-link routes
+	// for single-host Tailscale routes, but we shouldn't attempt to create a
+	// route for the interface's own IP.
+	var localAddr4, localAddr6 netip.Addr
+	var gatewayAddr4, gatewayAddr6 netip.Addr
 	addresses := make([]netip.Prefix, 0, len(cfg.LocalAddrs))
 	for _, addr := range cfg.LocalAddrs {
 		if (addr.Addr().Is4() && ipif4 == nil) || (addr.Addr().Is6() && ipif6 == nil) {
@@ -333,10 +345,12 @@ func configureInterface(cfg *Config, tun *tun.NativeTun, ht *health.Tracker) (re
 			continue
 		}
 		addresses = append(addresses, addr)
-		if addr.Addr().Is4() && !firstGateway4.IsValid() {
-			firstGateway4 = addr.Addr()
-		} else if addr.Addr().Is6() && !firstGateway6.IsValid() {
-			firstGateway6 = addr.Addr()
+		if addr.Addr().Is4() && !gatewayAddr4.IsValid() {
+			localAddr4 = addr.Addr()
+			gatewayAddr4 = tsaddr.TailscaleServiceIP()
+		} else if addr.Addr().Is6() && !gatewayAddr6.IsValid() {
+			localAddr6 = addr.Addr()
+			gatewayAddr6 = tsaddr.TailscaleServiceIPv6()
 		}
 	}
 
@@ -349,7 +363,7 @@ func configureInterface(cfg *Config, tun *tun.NativeTun, ht *health.Tracker) (re
 			continue
 		}
 
-		if route.Addr().Is6() && !firstGateway6.IsValid() {
+		if route.Addr().Is6() && !gatewayAddr6.IsValid() {
 			// Windows won't let us set IPv6 routes without having an
 			// IPv6 local address set. However, when we've configured
 			// a default route, we want to forcibly grab IPv6 traffic
@@ -358,18 +372,35 @@ func configureInterface(cfg *Config, tun *tun.NativeTun, ht *health.Tracker) (re
 			// route source.
 			ip := tsaddr.Tailscale4To6Placeholder()
 			addresses = append(addresses, netip.PrefixFrom(ip, ip.BitLen()))
-			firstGateway6 = ip
-		} else if route.Addr().Is4() && !firstGateway4.IsValid() {
+			gatewayAddr6 = ip
+		} else if route.Addr().Is4() && !gatewayAddr4.IsValid() {
 			// TODO: do same dummy behavior as v6?
 			return errors.New("due to a Windows limitation, one cannot have interface routes without an interface address")
 		}
 
-		var gateway netip.Addr
+		var gateway, localAddr netip.Addr
 		if route.Addr().Is4() {
-			gateway = firstGateway4
+			localAddr = localAddr4
+			gateway = gatewayAddr4
 		} else if route.Addr().Is6() {
-			gateway = firstGateway6
+			localAddr = localAddr6
+			gateway = gatewayAddr6
 		}
+
+		switch destAddr := route.Addr().Unmap(); {
+		case destAddr == localAddr:
+			// no need to add a route for the interface's
+			// own IP. The kernel does that for us.
+			// If we try to replace it, we'll fail to
+			// add the route unless NextHop is set, but
+			// then the interface's IP won't be pingable.
+			continue
+		case route.IsSingleIP() && (destAddr == gateway || tsaddr.IsTailscaleIP(destAddr)):
+			// add an on-link route if the destination
+			// is the nexthop itself or a single Tailscale IP.
+			gateway = localAddr
+		}
+
 		r := &routeData{
 			RouteData: winipcfg.RouteData{
 				Destination: route,
@@ -377,24 +408,15 @@ func configureInterface(cfg *Config, tun *tun.NativeTun, ht *health.Tracker) (re
 				Metric:      0,
 			},
 		}
-		if r.Destination.Addr().Unmap() == gateway {
-			// no need to add a route for the interface's
-			// own IP. The kernel does that for us.
-			// If we try to replace it, we'll fail to
-			// add the route unless NextHop is set, but
-			// then the interface's IP won't be pingable.
-			continue
-		}
+
 		if route.Addr().Is4() {
 			if route.Bits() == 0 {
 				foundDefault4 = true
 			}
-			r.NextHop = firstGateway4
 		} else if route.Addr().Is6() {
 			if route.Bits() == 0 {
 				foundDefault6 = true
 			}
-			r.NextHop = firstGateway6
 		}
 		routes = append(routes, r)
 	}