Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.
This is that experiment.
Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)
Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
testNodes have a reference to a testing.TB via their env.
Use it instead of making the caller pass theirs.
We did this in some methods but not others; finish the job.
This simplifies the call sites.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock was hanging onto its netmap on logout,
which caused tailscale status to display partial
information about a bunch of zombie peers.
After logout, there should be no peers.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
If you're using -verbose-tailscaled, you're doing in-the-weeds debugging,
so you probably want the verbose output.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
And it updates the build tag style on a couple files.
Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The existing code relied on the Go build cache to avoid
needless work when obtaining the tailscale binaries.
For non-obvious reasons, the binaries were getting re-linked
every time, which added 600ms or so on my machine to every test.
Instead, build the binaries exactly once, on demand.
This reduces the time to run 'go test -count=5' from 34s to 10s
on my machine.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
fee2d9fad added support for cmd/tailscale to connect to IPNExtension.
It came in two parts: If no socket was provided, dial IPNExtension first,
and also, if dialing the socket failed, fall back to IPNExtension.
The second half of that support caused the integration tests to fail
when run on a machine that was also running IPNExtension.
The integration tests want to wait until the tailscaled instances
that they spun up are listening. They do that by dialing the new
instance. But when that dial failed, it was falling back to IPNExtension,
so it appeared (incorrectly) that tailscaled was running.
Hilarity predictably ensued.
If a user (or a test) explicitly provides a socket to dial,
it is a reasonable assumption that they have a specific tailscaled
in mind and don't want to fall back to IPNExtension.
It is certainly true of the integration tests.
Instead of adding a bool to Connect, split out the notion of a
connection strategy. For now, the implementation remains the same,
but with the details hidden a bit. Later, we can improve that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.
Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.
As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.
A number of steps remain, including but limited to:
* move a bunch more random dialing stuff
* make netstack-mode tailscaled be able to use exit node's DNS proxy,
teaching tsdial's resolver to use it when an exit node is in use.
Updates #1713
Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.
Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.
Updates #1713
Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And annotate magicsock as a start.
And add localapi and debug handlers with the Prometheus-format
exporter.
Updates #3307
Change-Id: I47c5d535fe54424741df143d052760387248f8d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
testing.AllocsPerRun measures the total allocations performed
by the entire program while repeatedly executing a function f.
If some unrelated part of the rest of the program happens to
allocate a lot during that period, you end up with a test failure.
Ideally, the rest of the program would be silent while
testing.AllocsPerRun executes.
Realistically, that is often unachievable.
AllocsPerRun attempts to mitigate this by setting GOMAXPROCS to 1,
but that doesn't prevent other code from running;
it only makes it less likely.
You can also mitigate this by passing a large iteration count to
AllocsPerRun, but that is unreliable and needlessly expensive.
Unlike most of package testing, AllocsPerRun doesn't use any
toolchain magic, so we can just write a replacement.
One wild idea is to change how we count mallocs.
Instead of using runtime.MemStats, turn on memory profiling with a
memprofilerate of 1. Discard all samples from the profile whose stack
does not contain testing.AllocsPerRun. Count the remaining samples to
determine the number of mallocs.
That's fun, but overkill.
Instead, this change adds a simple API that attempts to get f to
run at least once with a target number of allocations.
This is useful when you know that f should allocate consistently.
We can then assume that any iterations with too many allocations
are probably due to one-time costs or background noise.
This suits most uses of AllocsPerRun.
Ratcheting tests tend to be significantly less flaky,
because they are biased towards success.
They can also be faster, because they can exit early,
once success has been reached.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
For the service, all we need to do is handle the `svc.SessionChange` command.
Upon receipt of a `windows.WTS_SESSION_UNLOCK` event, we fire off a goroutine to flush the DNS cache.
(Windows expects responses to service requests to be quick, so we don't want to do that synchronously.)
This is gated on an integral registry value named `FlushDNSOnSessionUnlock`,
whose value we obtain during service initialization.
(See [this link](https://docs.microsoft.com/en-us/windows/win32/api/winsvc/nc-winsvc-lphandler_function_ex) for information re: handling `SERVICE_CONTROL_SESSIONCHANGE`.)
Fixes#2956
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This adds support for tailscaled to be an HTTP proxy server.
It shares the same backend dialing code as the SOCK5 server, but the
client protocol is HTTP (including CONNECT), rather than SOCKS.
Fixes#2289
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #2781 (might even fix it, but its real issue is that
SetPrivateKey starts a ReSTUN goroutines which then logs, and
that bug and data race existed prior to MemLogger existing)
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
I have seen this once in the VM test (caused by an EOF, I believe on
shutdown) that didn't need to cause the test to fail.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
The tests build fine on other Unix's, they just can't run there.
But there is already a t.Skip by default, so `go test` ends up
working fine elsewhere and checks the code compiles.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
