Currently nobody calls SetTailscaleInterfaceName yet, so this is a
no-op. I checked oss, android, and the macOS/iOS client. Nobody calls
this, or ever did.
But I want to in the future.
Updates #15408
Updates #9040
Change-Id: I05dfabe505174f9067b929e91c6e0d8bc42628d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#27145
We require a means to trigger a recompilation of the DNS configuration
to pick up new nameservers for platforms where we blend the interface
nameservers from the OS into our DNS config.
Notably, on Darwin, the only API we have at our disposal will, in rare instances,
return a transient error when querying the interface nameservers on a link change if
they have not been set when we get the AF_ROUTE messages for the link
update.
There's a corresponding change in corp for Darwin clients, to track
the interface namservers during NEPathMonitor events, and call this
when the nameservers change.
This will also fix the slightly more obscure bug of changing nameservers
while tailscaled is running. That change can now be reflected in
magicDNS without having to stop the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This adds a new helper to the netmon package that allows us to
rate-limit log messages, so that they only print once per (major)
LinkChange event. We then use this when constructing the portmapper, so
that we don't keep spamming logs forever on the same network.
Updates #13145
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6e7162509148abea674f96efd76be9dffb373ae4
We previously retried getting a UPnP mapping when the device returned
error code 725, "OnlyPermanentLeasesSupported". However, we've seen
devices in the wild also return 402, "Invalid Args", when given a lease
duration. Fall back to the no-duration mapping method in these cases.
Updates #15223
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6a25007c9eeac0dac83750dd3ae9bfcc287c8fcf
For people who can't use LetsEncrypt because it's banned.
Per https://github.com/tailscale/tailscale/issues/11776#issuecomment-2520955317
This does two things:
1) if you run derper with --certmode=manual and --hostname=$IP_ADDRESS
we previously permitted, but now we also:
* auto-generate the self-signed cert for you if it doesn't yet exist on disk
* print out the derpmap configuration you need to use that
self-signed cert
2) teaches derp/derphttp's derp dialer to verify the signature of
self-signed TLS certs, if so declared in the existing
DERPNode.CertName field, which previously existed for domain fronting,
separating out the dial hostname from how certs are validates,
so it's not overloaded much; that's what it was meant for.
Fixes#11776
Change-Id: Ie72d12f209416bb7e8325fe0838cd2c66342c5cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There's nothing about it on
https://github.com/multipath-tcp/mptcp_net-next/issues/ but empirically
MPTCP doesn't support this option on awly's kernel 6.13.2 and in GitHub
actions.
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
We once again have a report of a panic from ParseRIB. This panic guard
should probably remain permanent.
Updates #14201
This reverts commit de9d4b2f886b6bf5cf0fe9be6c17d080267acef1.
Signed-off-by: James Tucker <james@tailscale.com>
Observed on some airlines (British Airways, WestJet), Squid is
configured to cache and transform these results, which is disruptive.
The server and client should both actively request that this is not done
by setting Cache-Control headers.
Send a timestamp parameter to further work against caches that do not
respect the cache-control headers.
Updates #14856
Signed-off-by: James Tucker <james@tailscale.com>
We had the debug packet capture code + Lua dissector in the CLI + the
iOS app. Now we don't, with tests to lock it in.
As a bonus, tailscale.com/net/packet and tailscale.com/net/flowtrack
no longer appear in the CLI's binary either.
A new build tag ts_omit_capture disables the packet capture code and
was added to build_dist.sh's --extra-small mode.
Updates #12614
Change-Id: I79b0628c0d59911bd4d510c732284d97b0160f10
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Still behind the same ts_omit_tap build tag.
See #14738 for background on the pattern.
Updates #12614
Change-Id: I03fb3d2bf137111e727415bd8e713d8568156ecc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We previously baked in the LetsEncrypt x509 root CA for our tlsdial
package.
This moves that out into a new "bakedroots" package and is now also
shared by ipn/ipnlocal's cert validation code (validCertPEM) that
decides whether it's time to fetch a new cert.
Otherwise, a machine without LetsEncrypt roots locally in its system
roots is unable to use tailscale cert/serve and fetch certs.
Fixes#14690
Change-Id: Ic88b3bdaabe25d56b9ff07ada56a27e3f11d7159
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Since 5297bd2cff8ed03679, tstun.Wrapper has required its Start
method to be called for it to function. Failure to do so just
results in weird hangs and I've wasted too much time multiple
times now debugging. Hopefully this prevents more lost time.
Updates tailscale/corp#24454
Change-Id: I87f4539f7be7dc154627f8835a37a8db88c31be0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have observed some clients with extremely large lists of IPv6
endpoints, in some cases from subnets where the machine also has the
zero address for a whole /48 with then arbitrary addresses additionally
assigned within that /48. It is in general unnecessary for reachability
to report all of these addresses, typically only one will be necessary
for reachability. We report two, to cover some other common cases such
as some styles of IPv6 private address rotations.
Updates tailscale/corp#25850
Signed-off-by: James Tucker <james@tailscale.com>
We build up maps of both the existing MagicDNS configuration in hosts
and the desired MagicDNS configuration, compare the two, and only
write out a new one if there are changes. The comparison doesn't need
to be perfect, as the occasional false-positive is fine, but this
should greatly reduce rewrites of the hosts file.
I also changed the hosts updating code to remove the CRLF/LF conversion
stuff, and use Fprintf instead of Frintln to let us write those inline.
Updates #14428
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We still use josharian/native (hi @josharian!) via
netlink, but I also sent https://github.com/mdlayher/netlink/pull/220
Updates #8632
Change-Id: I2eedcb7facb36ec894aee7f152c8a1f56d7fc8ba
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
These erroneously blocked a recent PR, which I fixed by simply
re-running CI. But we might as well fix them anyway.
These are mostly `printf` to `print` and a couple of `!=` to `!Equal()`
Updates #cleanup
Signed-off-by: Will Norris <will@tailscale.com>
Importing the ~deprecated golang.org/x/exp/maps as "xmaps" to not
shadow the std "maps" was getting ugly.
And using slices.Collect on an iterator is verbose & allocates more.
So copy (x)maps.Keys+Values into our slicesx package instead.
Updates #cleanup
Updates #12912
Updates #14514 (pulled out of that change)
Change-Id: I5e68d12729934de93cf4a9cd87c367645f86123a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The go-httpstat package has a data race when used with connections that
are performing happy-eyeballs connection setups as we are in the DERP
client. There is a long-stale PR upstream to address this, however
revisiting the purpose of this code suggests we don't really need
httpstat here.
The code populates a latency table that may be used to compare to STUN
latency, which is a lightweight RTT check. Switching out the reported
timing here to simply the request HTTP request RTT avoids the
problematic package.
Fixestailscale/corp#25095
Signed-off-by: James Tucker <james@tailscale.com>
This provides an interface for a user to force a preferred DERP outcome
for all future netchecks that will take precedence unless the forced
region is unreachable.
The option does not persist and will be lost when the daemon restarts.
Updates tailscale/corp#18997
Updates tailscale/corp#24755
Signed-off-by: James Tucker <james@tailscale.com>
I was hoping we'd catch an example input quickly, but the reporter had
rebooted their machine and it is no longer exhibiting the behavior. As
such this code may be sticking around quite a bit longer and we might
encounter other errors, so include the panic in the log entry.
Updates #14201
Updates #14202
Updates golang/go#70528
Signed-off-by: James Tucker <james@tailscale.com>
https://go.dev/wiki/CodeReviewComments#useful-test-failures
(Previously it was using subtests with names including the input, but
once those went away, there was no context left)
Updates #14169
Change-Id: Ib217028183a3d001fe4aee58f2edb746b7b3aa88
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Extracts tsaddr.IsTailscaleIPv4 out of tsaddr.IsTailscaleIP.
This will allow for checking valid Tailscale assigned IPv4 addresses
without checking IPv6 addresses.
Updates #14168
Updates tailscale/corp#24620
Signed-off-by: James Scott <jim@tailscale.com>
This gets close to all of the remaining ones.
Updates #12912
Change-Id: I9c672bbed2654a6c5cab31e0cbece6c107d8c6fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new generic result type (motivated by golang/go#70084) to
try it out, and uses it in the new lineutil package (replacing the old
lineread package), changing that package to return iterators:
sometimes over []byte (when the input is all in memory), but sometimes
iterators over results of []byte, if errors might happen at runtime.
Updates #12912
Updates golang/go#70084
Change-Id: Iacdc1070e661b5fb163907b1e8b07ac7d51d3f83
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Key changes:
- No mutex for every udp package: replace syncs.Map with regular map for udpTargetConns
- Use socksAddr as map key for better type safety
- Add test for multi udp target
Updates #7581
Change-Id: Ic3d384a9eab62dcbf267d7d6d268bf242cc8ed3c
Signed-off-by: VimT <me@vimt.me>
This commit addresses an issue with the SOCKS5 UDP relay functionality
when using the --tun=userspace-networking option. Previously, UDP packets
were not being correctly routed into the Tailscale network in this mode.
Key changes:
- Replace single UDP connection with a map of connections per target
- Use c.srv.dial for creating connections to ensure proper routing
Updates #7581
Change-Id: Iaaa66f9de6a3713218014cf3f498003a7cac9832
Signed-off-by: VimT <me@vimt.me>
Add an explicit case for exercising preferred DERP hysteresis around
the branch that compares latencies on a percentage basis.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
CI / cross (386, linux) (push) Successful in 16m47s
CI / cross (amd64, darwin) (push) Successful in 16m50s
CI / cross (amd64, freebsd) (push) Successful in 16m45s
CI / cross (amd64, openbsd) (push) Successful in 16m44s
CI / cross (amd64, windows) (push) Successful in 16m18s
CI / cross (arm, 5, linux) (push) Successful in 16m34s
CI / cross (arm, 7, linux) (push) Successful in 16m27s
CI / cross (arm64, darwin) (push) Successful in 17m30s
CI / cross (arm64, linux) (push) Successful in 16m25s
CI / cross (arm64, windows) (push) Successful in 15m45s
CI / ios (push) Successful in 1m36s
CI / cross (loong64, linux) (push) Successful in 16m30s
CI / crossmin (amd64, plan9) (push) Successful in 10m38s
CI / android (push) Successful in 1m26s
CI / crossmin (ppc64, aix) (push) Successful in 10m43s
CI / tailscale_go (push) Successful in 45s
CI / fuzz (push) Has been skipped
CI / notify_slack (push) Has been cancelled
CI / check_mergeability (push) Has been cancelled
CI / depaware (push) Successful in 1m1s
CI / go_generate (push) Successful in 2m11s
CI / go_mod_tidy (push) Successful in 59s
CI / licenses (push) Successful in 9s
CI / staticcheck (386, windows) (push) Failing after 1m15s
CI / staticcheck (amd64, darwin) (push) Failing after 1m19s
CI / staticcheck (amd64, linux) (push) Failing after 1m19s
CI / staticcheck (amd64, windows) (push) Failing after 1m13s
CI / wasm (push) Successful in 27m59s
This required sharing the dropped packet metric between two packages
(tstun and magicsock), so I've moved its definition to util/usermetric.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
CI / race-root-integration (1/4) (push) Waiting to run
CI / race-root-integration (2/4) (push) Waiting to run
CI / test (-race, amd64, 1/3) (push) Waiting to run
CI / test (-race, amd64, 2/3) (push) Waiting to run
CI / test (-race, amd64, 3/3) (push) Waiting to run
CI / test (386) (push) Waiting to run
CI / cross (386, linux) (push) Waiting to run
CI / cross (amd64, darwin) (push) Waiting to run
CI / cross (amd64, freebsd) (push) Waiting to run
CI / cross (amd64, openbsd) (push) Waiting to run
CI / cross (amd64, windows) (push) Waiting to run
CI / cross (arm, 5, linux) (push) Waiting to run
CI / cross (arm, 7, linux) (push) Waiting to run
CI / cross (arm64, darwin) (push) Waiting to run
CI / cross (arm64, linux) (push) Waiting to run
CI / cross (arm64, windows) (push) Waiting to run
CI / cross (loong64, linux) (push) Waiting to run
CI / ios (push) Waiting to run
CI / crossmin (amd64, plan9) (push) Waiting to run
CI / crossmin (ppc64, aix) (push) Waiting to run
CI / android (push) Waiting to run
CI / wasm (push) Waiting to run
CI / tailscale_go (push) Waiting to run
CI / fuzz (push) Waiting to run
CI / depaware (push) Waiting to run
CI / notify_slack (push) Blocked by required conditions
CI / check_mergeability (push) Blocked by required conditions
In an environment with unstable latency, such as upstream bufferbloat,
there are cases where a full netcheck could drop the prior preferred
DERP (likely home DERP) from future netcheck probe plans. This will then
likely result in a home DERP having a missing sample on the next
incremental netcheck, ultimately resulting in a home DERP move.
This change does not fix our overall response to highly unstable
latency, but it is an incremental improvement to prevent single spurious
samples during a full netcheck from alone triggering a flapping
condition, as now the prior changes to include historical latency will
still provide the desired resistance, and the home DERP should not move
unless latency is consistently worse over a 5 minute period.
Note that there is a nomenclature and semantics issue remaining in the
difference between a report preferred DERP and a home DERP. A report
preferred DERP is aspirational, it is what will be picked as a home DERP
if a home DERP connection needs to be established. A nodes home DERP may
be different than a recent preferred DERP, in which case a lot of
netcheck logic is fallible. In future enhancements much of the DERP move
logic should move to consider the home DERP, rather than recent report
preferred DERP.
Updates #8603
Updates #13969
Signed-off-by: James Tucker <james@tailscale.com>
During resolv.conf update, old 'search' lines are cleared but '\n' is not
deleted, leaving behind a new blank line on every update.
This adds 's' flag to regexp, so '\n' is included in the match and deleted when
old lines are cleared.
Also, insert missing `\n` when updated 'search' line is appended to resolv.conf.
Signed-off-by: Renato Aguiar <renato@renatoaguiar.net>
CI / test (-race, amd64, 1/3) (push) Has been cancelled
CI / test (-race, amd64, 2/3) (push) Has been cancelled
CI / test (-race, amd64, 3/3) (push) Has been cancelled
CI / test (386) (push) Has been cancelled
CI / cross (386, linux) (push) Has been cancelled
CI / cross (amd64, windows) (push) Has been cancelled
CI / cross (arm, 5, linux) (push) Has been cancelled
CI / cross (arm, 7, linux) (push) Has been cancelled
CI / cross (arm64, darwin) (push) Has been cancelled
CI / cross (arm64, linux) (push) Has been cancelled
CI / cross (arm64, windows) (push) Has been cancelled
CI / cross (loong64, linux) (push) Has been cancelled
CI / ios (push) Has been cancelled
CI / crossmin (amd64, plan9) (push) Has been cancelled
CI / licenses (push) Has been cancelled
CI / crossmin (ppc64, aix) (push) Has been cancelled
CI / android (push) Has been cancelled
CI / wasm (push) Has been cancelled
CI / tailscale_go (push) Has been cancelled
CI / fuzz (push) Has been cancelled
CI / depaware (push) Has been cancelled
CI / staticcheck (386, windows) (push) Has been cancelled
CI / staticcheck (amd64, darwin) (push) Has been cancelled
CI / staticcheck (amd64, linux) (push) Has been cancelled
CI / staticcheck (amd64, windows) (push) Has been cancelled
CI / notify_slack (push) Has been cancelled
CI / check_mergeability (push) Has been cancelled
CI / cross (amd64, darwin) (push) Has been cancelled
CI / cross (amd64, freebsd) (push) Has been cancelled
CI / cross (amd64, openbsd) (push) Has been cancelled
This allows us to print the time that a netcheck was run, which is
useful in debugging.
Updates #10972
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id48d30d4eb6d5208efb2b1526a71d83fe7f9320b
