Updates tailscale/tailscale#13326
Adds a CLI subcommand to perform DNS queries using the internal DNS forwarder and observe its internals (namely, which upstream resolvers are being used).
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Pin re-actors/alls-green usage to latest 1.x. This was previously
pointing to `@release/v2` which pulls in the latest changes from this
branch as they are released, with the potential to break our workflows
if a breaking change or malicious version on this stream is ever pushed.
Changing this to a pinned version also means that dependabot will keep
this in the pinned version format (e.g., referencing a SHA) when it
opens a PR to bump the dependency.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Update and pin actions/upload-artifact usage to latest 4.x. These were
previously pointing to @3 which pulls in the latest v3 as they are
released, with the potential to break our workflows if a breaking change
or malicious version on the @3 stream is ever pushed.
Changing this to a pinned version also means that dependabot will keep
this in the pinned version format (e.g., referencing a SHA) when it
opens a PR to bump the dependency.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Update and pin actions/cache usage to latest 4.x. These were previously
pointing to `@3` which pulls in the latest v3 as they are released, with
the potential to break our workflows if a breaking change or malicious
version on the `@3` stream is ever pushed.
Changing this to a pinned version also means that dependabot will keep
this in the pinned version format (e.g., referencing a SHA) when it
opens a PR to bump the dependency.
The breaking change between v3 and v4 is that v4 requires Node 20 which
should be a non-issue where this is run.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Use slackapi/slack-github-action across the board and pin to latest 1.x.
Previously we were referencing the 1.27.0 tag directly which is
vulnerable to someone replacing that version tag with malicious code.
Replace usage of ruby/action-slack with slackapi/slack-github-action as
the latter is the officially supported action from slack.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Pin codeql actions usage to latest 3.x. These were previously pointing
to `@2` which pulls in the latest v2 as they are released, with the
potential to break our workflows if a breaking change or malicious
version on the `@2` stream is ever pushed.
Changing this to a pinned version also means that dependabot will keep
this in the pinend version format (e.g., referencing a SHA) when it
opens a PR to bump the dependency.
The breaking change between v2 and v3 is that v3 requires Node 20 which
is a non-issue as we are running this on ubuntu latest.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Pin actions/checkout usage to latest 5.x. These were previously pointing
to `@4` which pulls in the latest v4 as they are released, with the
potential to break our workflows if a breaking change or malicious
version on the `@4` stream is ever pushed.
Changing this to a pinned version also means that dependabot will keep
this in the pinend version format (e.g., referencing a SHA) when it
opens a PR to bump the dependency.
The breaking change between v4 and v5 is that v5 requires Node 20 which
should be a non-issue where it is used.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Pin actions/checkout usage to latest 3.x or 4.x as appropriate. These
were previously pointing to `@4` or `@3` which pull in the latest
versions at these tags as they are released, with the potential to break
our workflows if a breaking change or malicious version for either of
these streams are released.
Changing this to a pinned version also means that dependabot will keep
this in the pinend version format (e.g., referencing a SHA) when it
opens a PR to bump the dependency.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Add an `AcceptEnv` field to `SSHRule`. This will contain the collection
of environment variable names / patterns that are specified in the
`acceptEnv` block for the SSH rule within the policy file. This will be
used in the tailscale client to filter out unacceptable environment
variables.
Updates: https://github.com/tailscale/corp/issues/22775
Signed-off-by: Mario Minardi <mario@tailscale.com>
Update go.toolchain.rev for https://github.com/tailscale/go/pull/104 and
add a test that, when using the tailscale_go build tag, we use the
right Go toolchain.
We'll crank up the strictness in later commits.
Updates #13527
Change-Id: Ifb09a844858be2beb144a420e4e9dbdc5c03ae3a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
containerboot's main.go had grown to well over 1000 lines with
lots of disparate bits of functionality. This commit is pure copy-
paste to group related functionality outside of the main function
into its own set of files. Everything is still in the main package
to keep the diff incremental and reviewable.
Updates #cleanup
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
mdnsResponder at least as of macOS Sequoia does not find NXDOMAIN
responses to these dns-sd PTR queries acceptable unless they include the
question section in the response. This was found debugging #13511, once
we turned on additional diagnostic reporting from mdnsResponder we
witnessed:
```
Received unacceptable 12-byte response from 100.100.100.100 over UDP via utun6/27 -- id: 0x7F41 (32577), flags: 0x8183 (R/Query, RD, RA, NXDomain), counts: 0/0/0/0,
```
If the response includes a question section, the resposnes are
acceptable, e.g.:
```
Received acceptable 59-byte response from 8.8.8.8 over UDP via en0/17 -- id: 0x2E55 (11861), flags: 0x8183 (R/Query, RD, RA, NXDomain), counts: 1/0/0/0,
```
This may be contributing to an issue under diagnosis in #13511 wherein
some combination of conditions results in mdnsResponder no longer
answering DNS queries correctly to applications on the system for
extended periods of time (multiple minutes), while dig against quad-100
provides correct responses for those same domains. If additional debug
logging is enabled in mdnsResponder we see it reporting:
```
Penalizing server 100.100.100.100 for 60 seconds
```
It is also possible that the reason that macOS & iOS never "stopped
spamming" these queries is that they have never been replied to with
acceptable responses. It is not clear if this special case handling of
dns-sd PTR queries was ever beneficial, and given this evidence may have
always been harmful. If we subsequently observe that the queries settle
down now that they have acceptable responses, we should remove these
special cases - making upstream queries very occasionally isn't a lot of
battery, so we should be better off having to maintain less special
cases and avoid bugs of this class.
Updates #2442
Updates #3025
Updates #3363
Updates #3594
Updates #13511
Signed-off-by: James Tucker <james@tailscale.com>
Updates tailscale/tailscale#13452
Bump the Go toolchain to the latest to pick up changes required to not crash on Android 9/10.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
In prep for upcoming flow tracking & mutex contention optimization
changes, this change refactors (subjectively simplifying) how the DERP
Server accounts for which peers have written to which other peers, to
be able to send PeerGoneReasonDisconnected messages to writes to
uncache their DRPO (DERP Return Path Optimization) routes.
Notably, this removes the Server.sentTo field which was guarded by
Server.mu and checked on all packet sends. Instead, the accounting is
moved to each sclient's sendLoop goroutine and now only needs to
acquire Server.mu for newly seen senders, the first time a peer sends
a packet to that sclient.
This change reduces the number of reasons to acquire Server.mu
per-packet from two to one. Removing the last one is the subject of an
upcoming change.
Updates #3560
Updates #150
Change-Id: Id226216d6629d61254b6bfd532887534ac38586c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This un-breaks vim-go (which doesn't understand "go 1.23") and allows
the natlab tests to work in a Nix shell (by adding the "qemu-img" and
"mkfs.ext4" binaries to the shell). These binaries are available even on
macOS, as I'm testing on my M1 Max.
Updates #13038
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I99f8521b5de93ea47dc33b099d5b243ffc1303da
Now that we have our API docs hosted at https://tailscale.com/api we can
remove the previous (and now outdated) markdown based docs. The top
level api.md has been left with the only content being the redirect to
the new docs.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
netcheck.Client.GetReport() applies its own deadlines. This 2s deadline
was causing GetReport() to never fall back to HTTPS/ICMP measurements
as it was shorter than netcheck.stunProbeTimeout, leaving no time
for fallbacks.
Updates #13394
Updates #6187
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And update a few callers as examples of motivation. (there are a
couple others, but these are the ones where it's prettier)
Updates #cleanup
Change-Id: Ic8c5cb7af0a59c6e790a599136b591ebe16d38eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
73280595a8 for #2751 added a "clientSet" interface to
distinguish the two cases of a client being singly connected (the
common case) vs tolerating multiple connections from the client at
once. At the time (three years ago) it was kinda an experiment
and we didn't know whether it'd stop the reconnect floods we saw
from certain clients. It did.
So this promotes it to a be first-class thing a bit, removing the
interface. The old tests from 73280595a were invaluable in ensuring
correctness while writing this change (they failed a bunch).
But the real motivation for this change is that it'll permit a future
optimization to add flow tracking for stats & performance where we
don't contend on Server.mu for each packet sent via DERP. Instead,
each client can track its active flows and hold on to a *clientSet and
ask the clientSet per packet what the active client is via one atomic
load rather than a mutex. And if the atomic load returns nil, we'll
know we need to ask the server to see if they died and reconnected and
got a new clientSet. But that's all coming later.
Updates #3560
Change-Id: I9ccda3e5381226563b5ec171ceeacf5c210e1faf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the desired netfilter mode was unset, we would always try
to use the `iptables` binary. In such cases if iptables was not found,
tailscaled would just crash as seen in #13440. To work around this, in those
cases check if the `iptables` binary even exists and if it doesn't fall back
to the nftables implementation.
Verified that it works on stock Ubuntu 24.04.
Updates #5621
Updates #8555
Updates #8762Fixes#13440
Signed-off-by: Maisem Ali <maisem@tailscale.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This mimics having Tailscale in the 'Stopped' state by programming an
empty DNS configuration when the current node key is expired.
Updates tailscale/support-escalations#55
Change-Id: I68ff4665761fb621ed57ebf879263c2f4b911610
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
It was scaring people. It's been pretty stable for quite some time now
and we're unlikely to change the API and break people at this point.
We might, but have been trying not to.
Fixestailscale/corp#22933
Change-Id: I0c3c79b57ccac979693c62ba320643a940ac947e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Rename kube/{types,client,api} -> kube/{kubetypes,kubeclient,kubeapi}
so that we don't need to rename the package on each import to
convey that it's kubernetes specific.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Further split kube package into kube/{client,api,types}. This is so that
consumers who only need constants/static types don't have to import
the client and api bits.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We already disable dynamic updates by setting DisableDynamicUpdate to 1 for the Tailscale interface.
However, this does not prevent non-dynamic DNS registration from happening when `ipconfig /registerdns`
runs and in similar scenarios. Notably, dns/windowsManager.SetDNS runs `ipconfig /registerdns`,
triggering DNS registration for all interfaces that do not explicitly disable it.
In this PR, we update dns/windowsManager.disableDynamicUpdates to also set RegistrationEnabled to 0.
Fixes#13411
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We no longer need this on Windows, and it was never required on other platforms.
It just results in more short-lived connections unless we use HTTP/2.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
