This adds the ability to "peek" at the value of a SyncValue, so that
it's possible to observe a value without computing this.
Updates tailscale/corp#17122
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I06f88c22a1f7ffcbc7ff82946335356bb0ef4622
The Add method derives a new ID by adding a signed integer
to the ID, treating it as an unsigned 256-bit big-endian integer.
We also add Less and Compare methods to PrivateID to provide
feature parity with existing methods on PublicID.
Updates tailscale/corp#11038
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was a typo in 2e19790f61.
It should have been on `Map` and not on `*Map` as otherwise
it doesn't allow for chaining like `someView.SomeMap().AsMap()`
and requires first assigning it to a variable.
Updates #typo
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was only obviously unused after the previous change, c39cde79d.
Updates #19334
Change-Id: I9896d5fa692cb4346c070b4a339d0d12340c18f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When node attributes were super rare, the O(n) slice scans looking for
node attributes was more acceptable. But now more code and more users
are using increasingly more node attributes. Time to make it a map.
Noticed while working on tailscale/corp#17879
Updates #cleanup
Change-Id: Ic17c80341f418421002fbceb47490729048756d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the recent 20e9f3369 we made HealthChangeRequest machine requests
include a NodeKey, as it was the oddball machine request that didn't
include one. Unfortunately, that code was sometimes being called (at
least in some of our integration tests) without a node key due to its
registration with health.RegisterWatcher(direct.ReportHealthChange).
Fortunately tests in corp caught this before we cut a release. It's
possible this only affects this particular integration test's
environment, but still worth fixing.
Updates tailscale/corp#1297
Change-Id: I84046779955105763dc1be5121c69fec3c138672
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In control there are conditions where the leaf functions are not being
optimized away (i.e. At is not inlined), resulting in undesirable time
spent copying during SliceContains. This optimization is likely
irrelevant to simpler code or smaller structures.
Updates #optimization
Signed-off-by: James Tucker <james@tailscale.com>
So we can use it in trunkd to quiet down the logs there.
Updates #5563
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f
It's unnecessary. Returning an array value is already a copy.
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: If7f350b61003ea08f16a531b7b4e8ae483617939
For a second we thought this was allocating but we were looking
at a CPU profile (which showed calls to mallocgc view makeslice)
instead of the alloc profile.
Updates golang/go#65685 (which if fixed wouldn't have confused us)
Change-Id: Ic0132310d52d8a65758a516142525339aa23b1ed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
views.Slice are meant to be immutable, and if used as such it
is at times desirable to use them as a key in a map. For non-viewed
slices it was kinda doable by creating a custom key struct but views.Slice
didn't allow for the same so add a method to create that struct here.
Updates tailscale/corp#17122
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Control can now send down a set of routes along with the domains, and
the routes will be advertised, with any newly overlapped routes being
removed to reduce the size of the routing table.
Fixestailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled
clients can use this value to disambiguate fast user switching from one tailnet
to another that are under the same exact login. We will also try to backfill
this information during backend starts and profile switches so that users don't
have to re-authenticate their profile. The first client to use this new
information is the CLI in 'tailscale switch -list' which now uses text/tabwriter
to display the ID, Tailnet, and Account. Since account names are ambiguous, we
allow the user to pass 'tailscale switch ID' to specify the exact tailnet they
want to switch to.
Updates #9286
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
There was pre-existing additional usage for Exit Node DNS resolution via
PeerAPI, as well as new usage just introduced for App Connectors.
Fixes ENG-2324
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
IPProto has been being converted to and from string formats in multiple
locations with variations in behavior. TextMarshaller and JSONMarshaller
implementations are now added, along with defined accepted and preferred
formats to centralize the logic into a single cross compatible
implementation.
Updates tailscale/corp#15043Fixestailscale/corp#15141
Signed-off-by: James Tucker <james@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have some flaky integration tests elsewhere that have no one place
to ask about the state of the world. This makes LocalBackend be that
place (as it's basically there anyway) but doesn't yet add the ForTest
accessor method.
This adds a LocalBackend.peers map[NodeID]NodeView that is
incrementally updated as mutations arrive. And then we start moving
away from using NetMap.Peers at runtime (UpdateStatus no longer uses
it now). And remove another copy of NodeView in the LocalBackend
nodeByAddr map. Change that to point into b.peers instead.
Future changes will then start streaming whole-node-granularity peer
change updates to WatchIPNBus clients, tracking statefully per client
what each has seen. This will get the GUI clients from receiving less
of a JSON storm of updates all the time.
Updates #1909
Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
