Adds a new IDP (Identity Provider) Custom Resource Definition to the Tailscale Kubernetes operator. This allows users to deploy and manage tsidp instances as Kubernetes resources.
Updates #16666
Signed-off-by: Raj Singh <raj@tailscale.com>
Updates k8s-proxy's config so its auth mode config matches that we set
in kube-apiserver ProxyGroups for consistency.
Updates #13358
Change-Id: I95e29cec6ded2dc7c6d2d03f968a25c822bc0e01
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler for ProxyGroups of type kube-apiserver that will
provision a Tailscale Service for each replica to advertise. Adds two
new condition types to the ProxyGroup, TailscaleServiceValid and
TailscaleServiceConfigured, to post updates on the state of that
reconciler in a way that's consistent with the service-pg reconciler.
The created Tailscale Service name is configurable via a new ProxyGroup
field spec.kubeAPISserver.ServiceName, which expects a string of the
form "svc:<dns-label>".
Lots of supporting changes were needed to implement this in a way that's
consistent with other operator workflows, including:
* Pulled containerboot's ensureServicesUnadvertised and certManager into
kube/ libraries to be shared with k8s-proxy. Use those in k8s-proxy to
aid Service cert sharing between replicas and graceful Service shutdown.
* For certManager, add an initial wait to the cert loop to wait until
the domain appears in the devices's netmap to avoid a guaranteed error
on the first issue attempt when it's quick to start.
* Made several methods in ingress-for-pg.go and svc-for-pg.go into
functions to share with the new reconciler
* Added a Resource struct to the owner refs stored in Tailscale Service
annotations to be able to distinguish between Ingress- and ProxyGroup-
based Services that need cleaning up in the Tailscale API.
* Added a ListVIPServices method to the internal tailscale client to aid
cleaning up orphaned Services
* Support for reading config from a kube Secret, and partial support for
config reloading, to prevent us having to force Pod restarts when
config changes.
* Fixed up the zap logger so it's possible to set debug log level.
Updates #13358
Change-Id: Ia9607441157dd91fb9b6ecbc318eecbef446e116
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This reconciler allows users to make applications highly available at L3 by
leveraging Tailscale Virtual Services. Many Kubernetes Service's
(irrespective of the cluster they reside in) can be mapped to a
Tailscale Virtual Service, allowing access to these Services at L3.
Updates #15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
This PR adds some custom logic for reading and writing
kube store values that are TLS certs and keys:
1) when store is initialized, lookup additional
TLS Secrets for this node and if found, load TLS certs
from there
2) if the node runs in certs 'read only' mode and
TLS cert and key are not found in the in-memory store,
look those up in a Secret
3) if the node runs in certs 'read only' mode, run
a daily TLS certs reload to memory to get any
renewed certs
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{containerboot,k8s-operator},kube: add preshutdown hook for egress PG proxies
This change is part of work towards minimizing downtime during update
rollouts of egress ProxyGroup replicas.
This change:
- updates the containerboot health check logic to return Pod IP in headers,
if set
- always runs the health check for egress PG proxies
- updates ClusterIP Services created for PG egress endpoints to include
the health check endpoint
- implements preshutdown endpoint in proxies. The preshutdown endpoint
logic waits till, for all currently configured egress services, the ClusterIP
Service health check endpoint is no longer returned by the shutting-down Pod
(by looking at the new Pod IP header).
- ensures that kubelet is configured to call the preshutdown endpoint
This reduces the possibility that, as replicas are terminated during an update,
a replica gets terminated to which cluster traffic is still being routed via
the ClusterIP Service because kube proxy has not yet updated routig rules.
This is not a perfect check as in practice, it only checks that the kube
proxy on the node on which the proxy runs has updated rules. However, overall
this might be good enough.
The preshutdown logic is disabled if users have configured a custom health check
port via TS_LOCAL_ADDR_PORT env var. This change throws a warnign if so and in
future setting of that env var for operator proxies might be disallowed (as users
shouldn't need to configure this for a Pod directly).
This is backwards compatible with earlier proxy versions.
Updates tailscale/tailscale#14326
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: add logic to parse L7 Ingresses in HA mode
- Wrap the Tailscale API client used by the Kubernetes Operator
into a client that knows how to manage VIPServices.
- Create/Delete VIPServices and update serve config for L7 Ingresses
for ProxyGroup.
- Ensure that ingress ProxyGroup proxies mount serve config from a shared ConfigMap.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,kube/kubetypes,cmd/k8s-operator: detect if Ingress is created in a tailnet that has no HTTPS
This attempts to make Kubernetes Operator L7 Ingress setup failures more explicit:
- the Ingress resource now only advertises HTTPS endpoint via status.ingress.loadBalancer.hostname when/if the proxy has succesfully loaded serve config
- the proxy attempts to catch cases where HTTPS is disabled for the tailnet and logs a warning
Updates tailscale/tailscale#12079
Updates tailscale/tailscale#10407
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Sets a custom hostinfo app type for ProxyGroup replicas, similarly
to how we do it for all other Kubernetes Operator managed components.
Updates tailscale/tailscale#13406,tailscale/corp#22920
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler that reconciles ExternalName Services that define a
tailnet target that should be exposed to cluster workloads on a ProxyGroup's
proxies.
The reconciler ensures that for each such service, the config mounted to
the proxies is updated with the tailnet target definition and that
and EndpointSlice and ClusterIP Service are created for the service.
Adds a new reconciler that ensures that as proxy Pods become ready to route
traffic to a tailnet target, the EndpointSlice for the target is updated
with the Pods' endpoints.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Rename kube/{types,client,api} -> kube/{kubetypes,kubeclient,kubeapi}
so that we don't need to rename the package on each import to
convey that it's kubernetes specific.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
