This change introduces a SSHSessionRecordingFailed event type
that is used when a session recording fails to start or fails during a
session, and the on failure indicates that it should fail open.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change bumps the capability version to 62, after support for
sending SSHEventNotificationRequests to control via noise for failure
events was introduced.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change adds a ConnectionID field to both SSHEventNotifyRequest and
CastHeader that identifies the ID of a connection to the SSH server.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change renames SSHFailureNotifyRequest to SSHEventNotifyRequest
to better reflect the additional events we could add in the future.
This change also adds an EventType used to catagories the events.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This adds support to try dialing out to multiple recorders each
with a 5s timeout and an overall 30s timeout. It also starts respecting
the actions `OnRecordingFailure` field if set, if it is not set
it fails open.
Updates tailscale/corp#9967
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This allows control to specify how to handle situations where the recorder
isn't available.
Updates tailscale/corp#9967
Signed-off-by: Maisem Ali <maisem@tailscale.com>
A follow-up PR will start using this field after we set it in our
production DERPMap.
Updates #7925
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Idb41b79e6055dddb8944f79d91ad4a186ace98c7
This makes `omitempty` actually work, and saves bytes in each map response.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
A peer can have IsWireGuardOnly, which means it will not support DERP or
Disco, and it must have Endpoints filled in order to be usable.
In the present implementation only the first Endpoint will be used as
the bestAddr.
Updates tailscale/corp#10351
Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
This only adds the field, to be used in a future commit.
Updates tailscale/corp#8020
Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change introduces the Recorders field to the SSHRule struct. The
field is used to store and define addresses where the ssh recorder is
located.
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This allows us to differentiate between the various tsnet apps that
we have like `golinks` and `k8s-operator`.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
These RPCs will be used to power the future 'tailscale lock remove' default behavior
of resigning signatures for which trust is about to be removed.
Signed-off-by: Tom DNetto <tom@tailscale.com>
With #6566 we started to more aggressively bind to the default interface
on Darwin. We are seeing some reports of the wrong cellular interface
being chosen on iOS. To help with the investigation, this adds to knobs
to control the behavior changes:
- CapabilityDebugDisableAlternateDefaultRouteInterface disables the
alternate function that we use to get the default interface on macOS
and iOS (implemented in tailscale/corp#8201). We still log what it
would have returned so we can see if it gets things wrong.
- CapabilityDebugDisableBindConnToInterface is a bigger hammer that
disables binding of connections to the default interface altogether.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
When turned on via environment variable (off by default), this will use
the BSD routing APIs to query what interface index a socket should be
bound to, rather than binding to the default interface in all cases.
Updates #5719
Updates #5940
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib4c919471f377b7a08cd3413f8e8caacb29fee0b
This allows users to temporarily enable/disable dnscache logging via a
new node capability, to aid in debugging strange connectivity issues.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I46cf2596a8ae4c1913880a78d0033f8b668edc08
For detecting a non-ideal binary running on the current CPU.
And for helping detect the best Synology package to update to.
Updates #6995
Change-Id: I722f806675b60ce95364471b11c388150c0d4aea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add `tailscale version --json` JSON output mode. This will be used
later for a double-opt-in (per node consent like Tailscale SSH +
control config) to let admins do remote upgrades via `tailscale
update` via a c2n call, which would then need to verify the
cmd/tailscale found on disk for running tailscale update corresponds
to the running tailscaled, refusing if anything looks amiss.
Plus JSON output modes are just nice to have, rather than parsing
unstable/fragile/obscure text formats.
Updates #6995
Updates #6907
Change-Id: I7821ab7fbea4612f4b9b7bdc1be1ad1095aca71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Nodes that are expired, taking into account the time delta calculated
from MapResponse.ControlTime have the newly-added Expired boolean set.
For additional defense-in-depth, also replicate what control does and
clear the Endpoints and DERP fields, and additionally set the node key
to a bogus value.
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia2bd6b56064416feee28aef5699ca7090940662a
Previously, `TAILSCALE_USE_WIP_CODE` was needed to hit a bunch of the TKA paths. With
this change:
- Enablement codepaths (NetworkLockInit) and initialization codepaths (tkaBootstrapFromGenesisLocked via tkaSyncIfNeeded)
require either the WIP envknob or CapabilityTailnetLockAlpha.
- Normal operation codepaths (tkaSyncIfNeeded, tkaFilterNetmapLocked) require TKA to be initialized, or either-or the
envknob / capability.
- Auxillary commands (ie: changing tka keys) require TKA to be initialized.
The end result is that it shouldn't be possible to initialize TKA (or subsequently use any of its features) without being
sent the capability or setting the envknob on tailscaled yourself.
I've also pulled out a bunch of unnecessary checks for CanSupportNetworkLock().
Signed-off-by: Tom DNetto <tom@tailscale.com>
There are three specific requirements for Funnel to work:
1) They must accept an invite.
2) They must enable HTTPS.
3) The "funnel" node attribute must be appropriately set up in the ACLs.
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
* Plumb disablement values through some of the internals of TKA enablement.
* Transmit the node's TKA hash at the end of sync so the control plane understands each node's head.
* Implement /machine/tka/disable RPC to actuate disablement on the control plane.
There is a partner PR for the control server I'll send shortly.
Signed-off-by: Tom DNetto <tom@tailscale.com>
It does nothing and never did and I don't think anybody remembers what
the original goal for it was.
Updates #5229 (fixes, but need to clean it up in another repo too)
Change-Id: I81cc6ff44d6d2888bc43e9145437f4c407907ea6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had previously added this to the netcheck report in #5087 but never
copied it into the NetInfo struct. Additionally, add it to log lines so
it's visible to support.
Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
And add a CLI/localapi and c2n mechanism to enable it for a fixed
amount of time.
Updates #1548
Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* and move goroutine scrubbing code to its own package for reuse
* bump capver to 45
Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
At some point we started restarting map polls on health change, but we
don't remember why. Maybe it was a desperate workaround for something.
I'm not sure it ever worked.
Rather than have a haunted graveyard, remove it.
In its place, though, and somewhat as a safety backup, send those
updates over the HTTP/2 noise channel if we have one open. Then if
there was a reason that a map poll restart would help we could do it
server-side. But mostly we can gather error stats and show
machine-level health info for debugging.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field
This field allows the control server to provide explicit information
about how to connect to it; useful if the client's link status can
change after the initial connection, or if the DNS settings pushed by
the control server break future connections.
Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
We're adding two log IDs to facilitate data-plane audit logging: a node-specific
log ID, and a domain-specific log ID.
Updated util/deephash/deephash_test.go with revised expectations for tailcfg.Node.
Updates https://github.com/tailscale/corp/issues/6991
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
It was checking if the sshServer was initialized as a proxy, but that
could either not have been initialized yet or Tailscale SSH could have
been disabled after intialized.
Also bump tailcfg.CurrentCapabilityVersion
Signed-off-by: Maisem Ali <maisem@tailscale.com>
For control to fetch a list of Tailscale SSH username candidates to
filter against the Tailnet's SSH policy to present some valid
candidates to a user.
Updates #3802
Updates tailscale/corp#7007
Change-Id: I3dce57b7a35e66891d5e5572e13ae6ef3c898498
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Baby steps towards turning off heartbeat pings entirely as per #540.
This doesn't change any current magicsock functionality and requires additional
changes to send/disco paths before the flag can be turned on.
Updates #540
Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0
Signed-off-by: Jenny Zhang <jz@tailscale.com>
Signed-off-by: Jenny Zhang <jz@tailscale.com>
As noted in #5617, our documented method of blocking log.tailscale.io
DNS no longer works due to bootstrap DNS.
Instead, provide an explicit flag (--no-logs-no-support) and/or env
variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher
uploads. It also sets a bit on Hostinfo to say that the node is in that
mode so we can end any support tickets from such nodes more quickly.
This does not yet provide an easy mechanism for users on some
platforms (such as Windows, macOS, Synology) to set flags/env. On
Linux you'd used /etc/default/tailscaled typically. Making it easier
to set flags for other platforms is tracked in #5114.
Fixes#5617Fixestailscale/corp#1475
Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.
For DoH, the customer ID is in the URL path.
For IPv6, the IP address includes the customer ID in the lower bits.
For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.
We don't use the IP linking mechanism.
Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.
Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.
If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.
Updates #2452
Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix broken build from 255c0472fb
"Oh, that's safe to commit because most tests are passing and it's
just a comment change!", I thought, forgetting I'd added a test that
parses its comments.
Change-Id: Iae93d595e06fec48831215a98adbb270f3bfda05
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
gofmt in 1.19 is now opinionated about structured text formatting in
comments. It did not like our style and kept fighting us whenever we
changed these lines. Give up the fight and be a bulleted list for it.
See:
* https://go.dev/doc/go1.19#go-doc and
* https://go.dev/doc/comment
Updates #4872
Change-Id: Ifae431218471217168c003ab3b4e03c394ca8105
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.
Updates #1543
Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This lets the control plane can make HTTP requests to nodes.
Then we can use this for future things rather than slapping more stuff
into MapResponse, etc.
Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So next time something like #5340 happens we can identify all affected
nodes and have the control plane send them health warnings.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Needed to identify the node. A serverside-check the machine key (used
to authenticate the noise session) is that of the specified NodeID
ensures the authenticity of the request.
Signed-off-by: Tom DNetto <tom@tailscale.com>
We're going to want to enable audit logging on a per-Tailnet basis. When this
happens, we want control to inform the Tailnet's clients of this capability.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
I documented capver 37 in 4ee64681a but forgot to bump the actual
constant. I've done this previously too, so add a test to prevent
it from happening again.
Change-Id: I6f7659db1243d30672121a384beb386d9f9f5b98
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- A network-lock key is generated if it doesn't already exist, and stored in the StateStore. The public component is communicated to control during registration.
- If TKA state exists on the filesystem, a tailnet key authority is initialized (but nothing is done with it for now).
Signed-off-by: Tom DNetto <tom@tailscale.com>
This adds the inverse to CapabilityFileSharingSend so that senders can
identify who they can Taildrop to.
Updates #2101
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a lighter mechanism for endpoint updates from control.
Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane server doesn't send these to modern clients so we
don't need them in the tree. The server has its own serialization code
to generate legacy MapResponses when needed.
Change-Id: Idd1e5d96ddf9d4306f2da550d20b77f0c252817a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This lets us distinguish "no IPv6 because the device's ISP doesn't
offer IPv6" from "IPv6 is unavailable/disabled in the OS".
Signed-off-by: David Anderson <danderson@tailscale.com>
And rewrite cloud detection to try to do only zero or one metadata
discovery request for all clouds, only doing a first (or second) as
confidence increases. Work remains for Windows, but a start.
And add Cloud to tailcfg.Hostinfo, which helped with testing using
"tailcfg debug hostinfo".
Updates #4983 (Linux only)
Updates #4984
Change-Id: Ib03337089122ce0cb38c34f724ba4b4812bc614e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a helper to check if Tailscale SSH is enabled. We're
currently checking the SSH_HostKeys field in a few places, but later
plan to add an explicit bool. This helper makes the check and any future
changes easier.
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
goimports is a superset of gofmt that also groups imports.
(the goimports tool also adds/removes imports as needed, but that
part is disabled here)
Change-Id: Iacf0408dfd9497f4ed3da4fa50e165359ce38498
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No CLI support yet. Just the curl'able version if you know the peerapi
port. (like via a TSMP ping)
Updates #306
Change-Id: I0662ba6530f7ab58d0ddb24e3664167fcd1c4bcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
From the machines tab its hard to differenciate desktop Linux installs from
server Linux installs. Transmitting this information should make this
determination a lot easier.
Due to the reality that tailscaled is likely a system process, the standard
checks based on XDG_SESSION_TYPE or DISPLAY environment variables are not
possible (those variables won't be set). Instead, we look for listening
unix sockets that are typical of desktop installs.
Signed-off-by: Tom DNetto <tom@tailscale.com>
For people running self-hosted control planes who want a global
opt-out knob instead of running their own logcatcher.
Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The default is still users can debug their own nodes. But like
cd916b728b did, this adds support for admins to grant additional
capabilities with the new tailcfg.CapabilityDebugPeer cap.
Updates #4217
Change-Id: Ifce3d9a1f8e8845797970a4f97b393194663d35f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Controlled by server-sent capability policy.
To be initially used for SSH servers to record sessions to other
nodes. Not yet productized into something user-accessible. (Notably,
the list of Taildrop targets from the sender side isn't augmented
yet.) This purely permits expanding the set of expands a node will
accept a drop from.
Updates #3802
Updates #4217
Change-Id: Id7a5bccd686490f8ef2cdc7dae7c07c440dc0085
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailcfg.PingResponse formalizes the TSMP & disco response message, and
controlclient is wired to send POST responses containing
tailcfg.PingResponse for TSMP and disco PingRequests.
Updates tailscale/corp#754
Signed-off-by: James Tucker <james@tailscale.com>
Also make IPPrefixSliceOf use Slice[netaddr.IPPrefix] as it also
provides additional functions besides the standard ones provided by
Slice[T].
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And add a CapabilityVersion type, primarily for documentation.
This makes MapRequest.Version, RegisterRequest.Version, and
SetDNSRequest.Version all use the same version, which will avoid
confusing in the future if Register or SetDNS ever changed their
semantics on Version change. (Currently they're both always 1)
This will requre a control server change to allow a
SetDNSRequest.Version value other than 1 to be deployed first.
Change-Id: I073042a216e0d745f52ee2dbc45cf336b9f84b7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise omitempty doesn't work.
This is wire-compatible with a non-pointer type, so switching
is safe, now and in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
(The name SSH_HostKeys is bad but SSHHostKeys is worse.)
Updates #3802
Change-Id: I2a889019c9e8b065b668dd58140db4fcab868a91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And log it when provided in map responses.
The test uses the date on which I joined Tailscale. :)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This leaves behind a type alias and associated constructor, to allow
for gradual switchover.
Updates #3206.
Signed-off-by: David Anderson <danderson@tailscale.com>
Temporary until #3206 goes away, but having changed the marshal/unmarshal
implementation I got nervous about the new one doing the correct thing.
Thankfully, the test says it does.
Signed-off-by: David Anderson <danderson@tailscale.com>
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.
This also allows us to tighten the "no allocs"
test in wgengine/filter.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
So js/wasm clients can log in for a bit using regular Gmail/GitHub auth
without using an ephemeral key but still have their node cleaned up
when they're done.
Updates #3157
Change-Id: I49e3d14e9d355a9b8bff0ea810b0016bfe8d47f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Complete with converters to all the other types that represent a
node key today, so the new type can gradually subsume old ones.
Updates #3206
Signed-off-by: David Anderson <danderson@tailscale.com>
The "go generate" command blindly looks for "//go:generate" anywhere
in the file regardless of whether it is truly a comment.
Prevent this false positive in cloner.go by mangling the string
to look less like "//go:generate".
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
So if the control plane knows that something's broken about the node, it can
include problem(s) in MapResponse and "tailscale status" will show it.
(and GUIs in the future, as it's in ipnstate.Status/JSON)
This also bumps the MapRequest.Version, though it's not strictly
required. Doesn't hurt.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Spelling out the command to run for every type
means that changing the command makes for a large, repetitive diff.
Stop doing that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
The DERPTestPort int meant two things before: which port to use, and
whether to disable TLS verification. Users would like to set the port
without disabling TLS, so break it into two options.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a flag to derp maps which specifies that default Tailscale DERP servers should not be
used. If true and there are entries in this map, it indicates that the entries in this map
should take precedent and not hit any of tailscale's DERP servers.
This change is backwards compatible, as the default behavior should be false.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
In order to clone DERPMaps, it was necessary to extend the cloner so that it supports
nested pointers inside of maps which are also cloneable. This also adds cloning for DERPRegions
and DERPNodes because they are on DERPMap's maps.
Signed-off-by: julianknodt <julianknodt@gmail.com>
Add MarshalText-like appending variants. Like:
https://pkg.go.dev/inet.af/netaddr#IP.AppendTo
To be used by @josharian's pending deephash optimizations.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This function accounted for ~1% of all allocs by tailscaled.
It is trivial to improve, so may as well.
name old time/op new time/op delta
KeyMarshalText-8 197ns ± 0% 47ns ± 0% -76.12% (p=0.016 n=4+5)
name old alloc/op new alloc/op delta
KeyMarshalText-8 200B ± 0% 80B ± 0% -60.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
KeyMarshalText-8 5.00 ± 0% 1.00 ± 0% -80.00% (p=0.008 n=5+5)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
