Coder has just adopted nhooyr/websocket which unfortunately changes the import path.
`github.com/coder/coder` imports `tailscale.com/net/wsconn` which was still pointing
to `nhooyr.io/websocket`, but this change updates it.
See https://coder.com/blog/websocket
Updates #13154
Change-Id: I3dec6512472b14eae337ae22c5bcc1e3758888d5
Signed-off-by: Kyle Carberry <kyle@carberry.com>
This PR modifies viewTypeForContainerType to use the last type parameter of a container type
as the value type, enabling the implementation of map-like container types where the second-to-last
(usually first) type parameter serves as the key type.
It also adds a MapContainer type to test the code generation.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording: support recording WebSocket sessions
Kubernetes currently supports two streaming protocols, SPDY and WebSockets.
WebSockets are replacing SPDY, see
https://github.com/kubernetes/enhancements/issues/4006.
We were currently only supporting SPDY, erroring out if session
was not SPDY and relying on the kube's built-in SPDY fallback.
This PR:
- adds support for parsing contents of 'kubectl exec' sessions streamed
over WebSockets
- adds logic to distinguish 'kubectl exec' requests for a SPDY/WebSockets
sessions and call the relevant handler
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add functionality to optionally serve a health check endpoint
(off by default).
Users can enable health check endpoint by setting
TS_HEALTHCHECK_ADDR_PORT to [<addr>]:<port>.
Containerboot will then serve an unauthenticatd HTTP health check at
/healthz at that address. The health check returns 200 OK if the
node has at least one tailnet IP address, else returns 503.
Updates tailscale/tailscale#12898
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
... rather than abusing the generic tsapp.
Per discussion in https://github.com/gokrazy/gokrazy/pull/275
It also means we can remove stuff we don't need, like ntp or randomd.
Updates #13038
Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The change in b7e48058c8 was too loose; it also captured the CLI
being run as a child process under cmd/tta.
Updates #13038
Updates #1866
Change-Id: Id410b87132938dd38ed4dd3959473c5d0d242ff5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/k8s-operator: fix DNS reconciler for dual-stack clusters
This fixes a bug where DNS reconciler logic was always assuming
that no more than one EndpointSlice exists for a Service.
In fact, there can be multiple, for example, in dual-stack
clusters, but also in other cases this is valid (as per kube docs).
This PR:
- allows for multiple EndpointSlices
- picks out the ones for IPv4 family
- deduplicates addresses
Updates tailscale/tailscale#13056
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Package setting contains types for defining and representing policy settings.
It facilitates the registration of setting definitions using Register and RegisterDefinition,
and the retrieval of registered setting definitions via Definitions and DefinitionOf.
This package is intended for use primarily within the syspolicy package hierarchy,
and added in a preparation for the next PRs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
getConns() is now responsible for returning both stable and unstable
conns. conn and measureFn are now passed together via connAndMeasureFn.
newConnAndMeasureFn() is responsible for constructing them.
TCP measurement timeouts are adjusted to more closely match netcheck.
Updates tailscale/corp#22114
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This adds a new NodeAgentClient type that can be used to
invoke the LocalAPI using the LocalClient instead of
handcrafted URLs. However, there are certain cases where
it does make sense for the node agent to provide more
functionality than whats possible with just the LocalClient,
as such it also exposes a http.Client to make requests directly.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And don't make guests under vnet/natlab upload to logcatcher,
as there won't be a valid cert anyway.
Updates #13038
Change-Id: Ie1ce0139788036b8ecc1804549a9b5d326c5fef5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
'stun' has been removed from metric names and replaced with a protocol
label. This refactor is preparation work for HTTPS & ICMP support.
Updates tailscale/corp#22114
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In a situation when manual edits are made on the admin panel, around the
GitOps process, the pusher will be stuck if `--fail-on-manual-edits` is
set, as expected.
To recover from this, there are 2 options:
1. revert the admin panel changes to get back in sync with the code
2. check in the manual edits to code
The former will work well, since previous and local ETags will match
control ETag again. The latter will still fail, since local and control
ETags match, but previous does not.
For this situation, check the local ETag against control first and
ignore previous when things are already in sync.
Updates https://github.com/tailscale/corp/issues/22177
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
For cases where users want to be extra careful about not overwriting
manual changes, add a flag to hard-fail. This is only useful if the etag
cache is persistent or otherwise reliable. This flag should not be used
in ephemeral CI workers that won't persist the cache.
Updates https://github.com/tailscale/corp/issues/22177
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* cmd/tsidp: add funnel support
Updates #10263.
Signed-off-by: Naman Sood <mail@nsood.in>
* look past funnel-ingress-node to see who we're authenticating
Signed-off-by: Naman Sood <mail@nsood.in>
* fix comment typo
Signed-off-by: Naman Sood <mail@nsood.in>
* address review feedback, support Basic auth for /token
Turns out you need to support Basic auth if you do client ID/secret
according to OAuth.
Signed-off-by: Naman Sood <mail@nsood.in>
* fix typos
Signed-off-by: Naman Sood <mail@nsood.in>
* review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* remove debugging log
Signed-off-by: Naman Sood <mail@nsood.in>
* add comments, fix header
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
During review of #8644 the `recover-compromised-key` command was renamed
to `revoke-key`, but the old name remained in some messages printed by
the command.
Fixestailscale/corp#19446
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This commit implements TCP GRO for packets being written to gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported IP checksum functions.
gVisor is updated in order to make use of newly exported
stack.PacketBuffer GRO logic.
TCP throughput towards gVisor, i.e. TUN write direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement, sometimes as high as 2x. High bandwidth-delay product
paths remain receive window limited, bottlenecked by gVisor's default
TCP receive socket buffer size. This will be addressed in a follow-on
commit.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver
The second result is from this commit with TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit implements TCP GSO for packets being read from gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported GSO logic from its tun
package.
A new gVisor stack.LinkEndpoint implementation has been established
(linkEndpoint) that is loosely modeled after its predecessor
(channel.Endpoint). This new implementation supports GSO of monster TCP
segments up to 64K in size, whereas channel.Endpoint only supports up to
32K. linkEndpoint will also be required for GRO, which will be
implemented in a follow-on commit.
TCP throughput from gVisor, i.e. TUN read direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement through a wide range of RTT and loss conditions, sometimes
as high as 5x.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender
[ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver
The second result is from this commit with TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
fixes tailscale#12968
The dns manager cleanup func was getting passed a nil
health tracker, which will panic. Fixed to pass it
the system health tracker.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality
Refactor SSH session recording functionality (mostly the bits related to
Kubernetes API server proxy 'kubectl exec' session recording):
- move the session recording bits used by both Tailscale SSH
and the Kubernetes API server proxy into a shared sessionrecording package,
to avoid having the operator to import ssh/tailssh
- move the Kubernetes API server proxy session recording functionality
into a k8s-operator/sessionrecording package, add some abstractions
in preparation for adding support for a second streaming protocol (WebSockets)
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Re-instates the functionality that generates CRD API docs, but using
a different library as the one we were using earlier seemed to have
some issues with its Git history.
Also regenerates the docs (make kube-generate-all).
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This adds support for container-like types such as Container[T] that
don't explicitly specify a view type for T. Instead, a package implementing
a container type should also implement and export a ContainerView[T, V] type
and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which
returns a view for the specified container, inferring the element view type V
from the element type T.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
To match the format of exit node suggestions and ensure that the result
is not ambiguous, relax exit node CLI selection to permit using a FQDN
including the trailing dot.
Updates #12618
Change-Id: I04b9b36d2743154aa42f2789149b2733f8555d3f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
