Avoid the unbounded runtime during random allocation, if random
allocation fails after a first pass at random through the provided
ranges, pick the next free address by walking through the allocated set.
The new ipx utilities provide a bitset based allocation pool, good for
small to moderate ranges of IPv4 addresses as used in natc.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
fixestailscale/corp#27506
The source address link selection on sandboxed macOS doesn't deal
with loopback addresses correctly. This adds an explicit check to ensure
we return the loopback interface for loopback addresses instead of the
default empty interface.
Specifically, this allows the dns resolver to route queries to a loopback
IP which is a common tactic for local DNS proxies.
Tested on both macos, macsys and tailscaled. Forwarded requests to
127/8 all bound to lo0.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This commit implements an experimental UDP relay server. The UDP relay
server leverages the Disco protocol for a 3-way handshake between
client and server, along with 3 new Disco message types for said
handshake. These new Disco message types are also considered
experimental, and are not yet tied to a capver.
The server expects, and imposes, a Geneve (Generic Network
Virtualization Encapsulation) header immediately following the underlay
UDP header. Geneve protocol field values have been defined for Disco
and WireGuard. The Geneve control bit must be set for the handshake
between client and server, and unset for messages relayed between
clients through the server.
Updates tailscale/corp#27101
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Add the golang-image-ico package, which is an incredibly small package
to handle the ICO container format with PNG inside. Some profile photos
look quite pixelated when displayed at this size, but it's better than
nothing, and any Windows support is just a bonus anyway.
Updates #1708
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
Otherwise you can get stuck finding minor ones nonstop.
Fixes#15484
Change-Id: I7f98ac338c0b32ec1b9fdc47d053207b5fc1bf23
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It only affected js/wasm and tamago.
Updates tailscale/corp#24697
Change-Id: I8fd29323ed9b663fe3fd8d4a86f26ff584a3e134
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
initPeerAPIListener may be returning early unexpectedly. Add debug logging to
see what causes it to return early when it does.
Updates #14393
Signed-off-by: Percy Wegmann <percy@tailscale.com>
If we previously knew of macaddresses of a node, and they
suddenly goes to zero, ignore them and return the previous
hardware addresses.
Updates tailscale/corp#25168
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
For hooking up websocket VM clients to natlab.
Updates #13038
Change-Id: Iaf728b9146042f3d0c2d3a5e25f178646dd10951
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Re-enable HA Ingress again that was disabled for 1.82 release.
This reverts commit fea74a60d529bcccbc8ded74644256bb6f6c7727.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Not all platforms have hardlinks, or not easily.
This lets a "tailscale" wrapper script set an environment variable
before calling tailscaled.
Updates #2233
Change-Id: I9eccc18651e56c106f336fcbbd0fd97a661d312e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we update ipnlocal.LocalBackend to allow registering callbacks for control client creation
and profile changes. We also allow to register ipnauth.AuditLogFunc to be called when an auditable
action is attempted.
We then use all this to invert the dependency between the auditlog and ipnlocal packages and make
the auditlog functionality optional, where it only registers its callbacks via ipnlocal-provided hooks
when the auditlog package is imported.
We then underscore-import it when building tailscaled for Windows, and we'll explicitly
import it when building xcode/ipn-go-bridge for macOS. Since there's no default log-store
location for macOS, we'll also need to call auditlog.SetStoreFilePath to specify where
pending audit logs should be persisted.
Fixes#15394
Updates tailscale/corp#26435
Updates tailscale/corp#27012
Signed-off-by: Nick Khyl <nickk@tailscale.com>
LocalBackend transitions to ipn.NoState when switching to a different (or new) profile.
When this happens, we should unconfigure wgengine to clear routes, DNS configuration,
firewall rules that block all traffic except to the exit node, etc.
In this PR, we update (*LocalBackend).enterStateLockedOnEntry to do just that.
Fixes#15316
Updates tailscale/corp#23967
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The default values for `tailscale up` and `tailscale set` are supposed
to agree for all common flags. But they don’t for `--accept-routes`
on Windows and from the Mac OS App Store, because `tailscale up`
computes this value based on the operating system:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
In addition, `ipn.Prefs.RouteAll` defaults to true so it disagrees
with both of the flags above.
This patch makes `--accept-routes` use the same logic for in both
commands by hoisting the logic that was buried in `cmd/tailscale/cli`
to `ipn.Prefs.DefaultRouteAll`. Then, all three of defaults can agree.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
The default values for `tailscale up` and `tailscale set` are supposed
to agree on all common flags. But they don’t for `--accept-dns`:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-dns
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-dns
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
This patch makes `--accept-dns` default to true in both commands and
also introduces `TestSetDefaultsMatchUpDefaults` to prevent any future
drift.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
Temporarily make sure that the HA Ingress reconciler does not run,
as we do not want to release this to stable just yet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We now have a tailscale/alpine-base:3.19 use that as the default base image.
Updates tailscale/tailscale#15328
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is a very dumb fix as it has an unbounded worst case runtime. IP
allocation needs to be done in a more sane way in a follow-up.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
Bumps Alpine 3.18 -> 3.19.
Alpine 3.19 links iptables to nftables-based
implementation that can break hosts that don't
support nftables.
Link iptables back to the legacy implementation
till we have some certainty that changing to
nftables based implementation will not break existing
setups.
Updates tailscale/tailscale#15328
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{k8s-operator,containerboot}: check TLS cert before advertising VIPService
- Ensures that Ingress status does not advertise port 443 before
TLS cert has been issued
- Ensure that Ingress backends do not advertise a VIPService
before TLS cert has been issued, unless the service also
exposes port 80
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
ipn/store/kubestore: skip cache for the write replica in cert share mode
This is to avoid issues where stale cache after Ingress recreation
causes the certs not to be re-issued.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When compiled into TailscaleKit.framework (via the libtailscale
repository), os.Executable() returns an error instead of the name of the
executable. This commit adds another branch to the switch statement that
enumerates platforms which behave in this manner, and defaults to
"tsnet" in the same manner as those other platforms.
Fixes#15410.
Signed-off-by: James Nugent <james@jen20.com>
Minimal mitigation that doesn't do the full refactor that's probably
warranted.
Updates #15402
Change-Id: I79fd91de0e0661d25398f7d95563982ed1d11561
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
fixestailscale/tailscale#15394
In the current iteration, usage of the memstore for the audit
logger is expected on some platforms.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Add a label which differentiates the address family
for STUN checks.
Also initialize the derpprobe_attempts_total and
derpprobe_seconds_total metrics by adding 0 for
the alternate fail/ok case.
Updates tailscale/corp#27249
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
On Windows and Android, peerAPIListeners may be initialized after a link change.
This commit adds log statements to make it easier to trace this flow.
Updates #14393
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Only send a stored raw map message in reply to a streaming map response.
Otherwise a non-streaming map response might pick it up first, and
potentially drop it. This guarantees that a map response sent via
AddRawMapResponse will be picked up by the main map response loop in the
client.
Fixes#15362
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
These tests aren't perfect, nor is this complete coverage, but this is a
set of coverage that is at least stable.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
Currently nobody calls SetTailscaleInterfaceName yet, so this is a
no-op. I checked oss, android, and the macOS/iOS client. Nobody calls
this, or ever did.
But I want to in the future.
Updates #15408
Updates #9040
Change-Id: I05dfabe505174f9067b929e91c6e0d8bc42628d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To let you easily run multiple tailscaled instances for development
and let you route CLI commands to the right one.
Updates #15145
Change-Id: I06b6a7bf024f341c204f30705b4c3068ac89b1a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed logs on one of my machines where it can't auto-update with
scary log spam about "failed to apply tailnet-wide default for
auto-updates".
This avoids trying to do the EditPrefs if we know it's just going to
fail anyway.
Updates #282
Change-Id: Ib7db3b122185faa70efe08b60ebd05a6094eed8c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Noticed while working on a dev tool that uses local.Client.
Updates #cleanup
Change-Id: I981efff74a5cac5f515755913668bd0508a4aa14
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Switch from using the Comment field to a ts-scoped annotation for
tracking which operators are cooperating over ownership of a
VIPService.
Updates tailscale/corp#24795
Change-Id: I72d4a48685f85c0329aa068dc01a1a3c749017bf
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
(*LocalBackend).setControlClientLocked() is called to both set and reset b.cc.
We shouldn't attempt to start the audit logger when b.cc is being reset (i.e., cc is nil).
However, it's fine to start the audit logger if b.cc implements auditlog.Transport, even if it's not a controlclient.Auto but a mock control client.
In this PR, we fix both issues and add an assertion that controlclient.Auto is an auditlog.Transport. This ensures a compile-time failure if controlclient.Auto ever stops being a valid transport due to future interface or implementation changes.
Updates tailscale/corp#26435
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Resetting LocalBackend's netmap without also unconfiguring wgengine to reset routes, DNS, and the killswitch
firewall rules may cause connectivity issues until a new netmap is received.
In some cases, such as when bootstrap DNS servers are inaccessible due to network restrictions or other reasons,
or if the control plane is experiencing issues, this can result in a complete loss of connectivity until the user disconnects
and reconnects to Tailscale.
As LocalBackend handles state resets in (*LocalBackend).resetForProfileChangeLockedOnEntry(), and this includes
resetting the netmap, resetting the current netmap in (*LocalBackend).Start() is not necessary.
Moreover, it's harmful if (*LocalBackend).Start() is called more than once for the same profile.
In this PR, we update resetForProfileChangeLockedOnEntry() to reset the packet filter and remove
the redundant resetting of the netmap and packet filter from Start(). We also update the state machine
tests and revise comments that became inaccurate due to previous test updates.
Updates tailscale/corp#27173
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds a portable way to do a raw LocalAPI request without worrying
about the Unix-vs-macOS-vs-Windows ways of hitting the LocalAPI server.
(It was already possible but tedious with 'tailscale debug local-creds')
Updates tailscale/corp#24690
Change-Id: I0828ca55edaedf0565c8db192c10f24bebb95f1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If conffile is used to configure tailscaled, always update
currently advertised services from conffile, even if they
are empty in the conffile, to ensure that it is possible
to transition to a state where no services are advertised.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This makes the web server running inside tailscaled on 100.100.100.100:80 support requests with `Host: 100.100.100.100:80` and its IPv6 equivalent.
Prior to this commit, the web server replied to such requests with a redirect to the node's Tailscale IP:5252.
Fixes https://github.com/tailscale/tailscale/issues/14415
Signed-off-by: Alex Klyubin <klyubin@gmail.com>
There was a flaky failure case where renaming a TLS hostname for an
ingress might leave the old hostname dangling in tailscaled config. This
happened when the proxygroup reconciler loop had an outdated resource
version of the config Secret in its cache after the
ingress-pg-reconciler loop had very recently written it to delete the
old hostname. As the proxygroup reconciler then did a patch, there was
no conflict and it reinstated the old hostname.
This commit updates the patch to an update operation so that if the
resource version is out of date it will fail with an optimistic lock
error. It also checks for equality to reduce the likelihood that we make
the update API call in the first place, because most of the time the
proxygroup reconciler is not even making an update to the Secret in the
case that the hostname has changed.
Updates tailscale/corp#24795
Change-Id: Ie23a97440063976c9a8475d24ab18253e1f89050
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
updates tailscale/corp#27145
We require a means to trigger a recompilation of the DNS configuration
to pick up new nameservers for platforms where we blend the interface
nameservers from the OS into our DNS config.
Notably, on Darwin, the only API we have at our disposal will, in rare instances,
return a transient error when querying the interface nameservers on a link change if
they have not been set when we get the AF_ROUTE messages for the link
update.
There's a corresponding change in corp for Darwin clients, to track
the interface namservers during NEPathMonitor events, and call this
when the nameservers change.
This will also fix the slightly more obscure bug of changing nameservers
while tailscaled is running. That change can now be reflected in
magicDNS without having to stop the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Update the HA Ingress controller to wait until it sees AdvertisedServices
config propagated into at least 1 Pod's prefs before it updates the status
on the Ingress, to ensure the ProxyGroup Pods are ready to serve traffic
before indicating that the Ingress is ready
Updates tailscale/corp#24795
Change-Id: I1b8ce23c9e312d08f9d02e48d70bdebd9e1a4757
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
