Updates tailscale/tailscale#13326
This PR begins implementing a `tailscale dns` command group in the Tailscale CLI. It provides an initial implementation of `tailscale dns status` which dumps the state of the internal DNS forwarder.
Two new endpoints were added in LocalAPI to support the CLI functionality:
- `/netmap`: dumps a copy of the last received network map (because the CLI shouldn't have to listen to the ipn bus for a copy)
- `/dns-osconfig`: dumps the OS DNS configuration (this will be very handy for the UI clients as well, as they currently do not display this information)
My plan is to implement other subcommands mentioned in tailscale/tailscale#13326, such as `query`, in later PRs.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This PR changes how LocalBackend handles interactive (initiated via StartLoginInteractive) and non-interactive (e.g., due to key expiration) logins,
and when it sends the authURL to the connected clients.
Specifically,
- When a user initiates an interactive login by clicking Log In in the GUI, the LocalAPI calls StartLoginInteractive.
If an authURL is available and hasn't expired, we immediately send it to all connected clients, suggesting them to open that URL in a browser.
Otherwise, we send a login request to the control plane and set a flag indicating that an interactive login is in progress.
- When LocalBackend receives an authURL from the control plane, we check if it differs from the previous one and whether an interactive login
is in progress. If either condition is true, we notify all connected clients with the new authURL and reset the interactive login flag.
We reset the auth URL and flags upon a successful authentication, when a different user logs in and when switching Tailscale login profiles.
Finally, we remove the redundant dedup logic added to WatchNotifications in #12096 and revert the tests to their original state to ensure that
calling StartLoginInteractive always produces BrowseToURL notifications, either immediately or when the authURL is received from the control plane.
Fixes#13296
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The LocalBackend's state machine starts in NoState and soon transitions to NeedsLogin if there's no auto-start profile,
with the profileManager starting with a new empty profile. Notably, entering the NeedsLogin state blocks engine updates.
We expect the user to transition out of this state by logging in interactively, and we set WantRunning to true when
controlclient enters the StateAuthenticated state.
While our intention is correct, and completing an interactive login should set WantRunning to true, our assumption
that logging into the current Tailscale profile is the only way to transition out of the NeedsLogin state is not accurate.
Another common transition path includes an explicit profile switch (via LocalBackend.SwitchProfile) or an implicit switch
when a Windows user connects to the backend. This results in a bug where WantRunning is set to true even when it was
previously set to false, and the user expressed no intention of changing it.
A similar issue occurs when switching from (sic) a Tailnet that has seamlessRenewalEnabled, regardless of the current state
of the LocalBackend's state machine, and also results in unexpectedly set WantRunning. While this behavior is generally
undesired, it is also incorrect that it depends on the control knobs of the Tailnet we're switching from rather than
the Tailnet we're switching to. However, this issue needs to be addressed separately.
This PR updates LocalBackend.SetControlClientStatus to only set WantRunning to true in response to an interactive login
as indicated by a non-empty authURL.
Fixes#6668Fixes#11280
Updates #12756
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In preparation for multi-user and unattended mode improvements, we are
refactoring and cleaning up `ipn/ipnlocal.profileManager`. The concept of the
"current user", which is only relevant on Windows, is being deprecated and will
soon be removed to allow more than one Windows user to connect and utilize
`LocalBackend` according to that user's access rights to the device and specific
Tailscale profiles.
We plan to pass the user's identity down to the `profileManager`, where it can
be used to determine the user's access rights to a given `LoginProfile`. While
the new permission model in `ipnauth` requires more work and is currently
blocked pending PR reviews, we are updating the `profileManager` to reduce its
reliance on the concept of a single OS user being connected to the backend at
the same time.
We extract the switching to the default Tailscale profile, which may also
trigger legacy profile migration, from `profileManager.SetCurrentUserID`. This
introduces `profileManager.DefaultUserProfileID`, which returns the default
profile ID for the current user, and `profileManager.SwitchToDefaultProfile`,
which is essentially a shorthand for `pm.SwitchProfile(pm.DefaultUserProfileID())`.
Both methods will eventually be updated to accept the user's identity and
utilize that user's default profile.
We make access checks more explicit by introducing the `profileManager.checkProfileAccess`
method. The current implementation continues to use `profileManager.currentUserID`
and `LoginProfile.LocalUserID` to determine whether access to a given profile
should be granted. This will be updated to utilize the `ipnauth` package and the
new permissions model once it's ready. We also expand access checks to be used
more widely in the `profileManager`, not just when switching or listing
profiles. This includes access checks in methods like `SetPrefs` and, most notably,
`DeleteProfile` and `DeleteAllProfiles`, preventing unprivileged Windows users
from deleting Tailscale profiles owned by other users on the same device,
including profiles owned by local admins.
We extract `profileManager.ProfilePrefs` and `profileManager.SetProfilePrefs`
methods that can be used to get and set preferences of a given `LoginProfile` if
`profileManager.checkProfileAccess` permits access to it.
We also update `profileManager.setUnattendedModeAsConfigured` to always enable
unattended mode on Windows if `Prefs.ForceDaemon` is true in the current
`LoginProfile`, even if `profileManager.currentUserID` is `""`. This facilitates
enabling unattended mode via `tailscale up --unattended` even if
`tailscale-ipn.exe` is not running, such as when a Group Policy or MDM-deployed
script runs at boot time, or when Tailscale is used on a Server Code or otherwise
headless Windows environments. See #12239, #2137, #3186 and
https://github.com/tailscale/tailscale/pull/6255#issuecomment-2016623838 for
details.
Fixes#12239
Updates tailscale/corp#18342
Updates #3186
Updates #2137
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, we use PermitRead/PermitWrite/PermitCert permission flags to determine which operations are allowed for a LocalAPI client.
These checks are performed when localapi.Handler handles a request. Additionally, certain operations (e.g., changing the serve config)
requires the connected user to be a local admin. This approach is inherently racey and is subject to TOCTOU issues.
We consider it to be more critical on Windows environments, which are inherently multi-user, and therefore we prevent more than one
OS user from connecting and utilizing the LocalBackend at the same time. However, the same type of issues is also applicable to other
platforms when switching between profiles that have different OperatorUser values in ipn.Prefs.
We'd like to allow more than one Windows user to connect, but limit what they can see and do based on their access rights on the device
(e.g., an local admin or not) and to the currently active LoginProfile (e.g., owner/operator or not), while preventing TOCTOU issues on Windows
and other platforms. Therefore, we'd like to pass an actor from the LocalAPI to the LocalBackend to represent the user performing the operation.
The LocalBackend, or the profileManager down the line, will then check the actor's access rights to perform a given operation on the device
and against the current (and/or the target) profile.
This PR does not change the current permission model in any way, but it introduces the concept of an actor and includes some preparatory
work to pass it around. Temporarily, the ipnauth.Actor interface has methods like IsLocalSystem and IsLocalAdmin, which are only relevant
to the current permission model. It also lacks methods that will actually be used in the new model. We'll be adding these gradually in the next
PRs and removing the deprecated methods and the Permit* flags at the end of the transition.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
On a major link change the LAN routes may change, so on linkChange where
ChangeDelta.Major, we need to call authReconfig to ensure that new
routes are observed and applied.
Updates tailscale/corp#22574
Signed-off-by: James Tucker <james@tailscale.com>
This is the equivalent of quad-100, but for IPv6. This is technically
already contained in the Tailscale IPv6 ULA prefix, but that is only
installed when remote peers are visible via control with contained
addrs. The service addr should always be reachable.
Updates #1152
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And convert a few callers as an example, but nowhere near all.
Updates #12912
Change-Id: I5eaa12a29a6cd03b58d6f1072bd27bc0467852f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates tailscale/corp#22120
Adds the ability to start the backend by reading an authkey stored in the syspolicy database (MDM). This is useful for devices that are provisioned in an unattended fashion.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
* cmd/tsidp: add funnel support
Updates #10263.
Signed-off-by: Naman Sood <mail@nsood.in>
* look past funnel-ingress-node to see who we're authenticating
Signed-off-by: Naman Sood <mail@nsood.in>
* fix comment typo
Signed-off-by: Naman Sood <mail@nsood.in>
* address review feedback, support Basic auth for /token
Turns out you need to support Basic auth if you do client ID/secret
according to OAuth.
Signed-off-by: Naman Sood <mail@nsood.in>
* fix typos
Signed-off-by: Naman Sood <mail@nsood.in>
* review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* remove debugging log
Signed-off-by: Naman Sood <mail@nsood.in>
* add comments, fix header
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Fixestailscale/tailscale#12973
Updates tailscale/tailscale#1634
There was a logic issue in the captive detection code we shipped in https://github.com/tailscale/tailscale/pull/12707.
Assume a captive portal has been detected, and the user notified. Upon switching to another Wi-Fi that does *not* have a captive portal, we were issuing a signal to interrupt any pending captive detection attempt. However, we were not also setting the `captive-portal-detected` warnable to healthy. The result was that any "captive portal detected" alert would not be cleared from the UI.
Also fixes a broken log statement value.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
wgengine/magicsock,ipn: allow setting static node endpoints via tailscaled config file.
Adds a new StaticEndpoints field to tailscaled config
that can be used to statically configure the endpoints
that the node advertizes. This field will replace
TS_DEBUG_PRETENDPOINTS env var that can be used to achieve the same.
Additionally adds some functionality that ensures that endpoints
are updated when configfile is reloaded.
Also, refactor configuring/reconfiguring components to use the
same functionality when configfile is parsed the first time or
subsequent times (after reload). Previously a configfile reload
did not result in resetting of prefs. Now it does- but does not yet
tell the relevant components to consume the new prefs. This is to
be done in a follow-up.
Updates tailscale/tailscale#12578
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#20971
We added some Warnables for DERP failure situations, but their Text currently spits out the DERP region ID ("10") in the UI, which is super ugly. It would be better to provide the RegionName of the DERP region that is failing. We can do so by storing a reference to the last-known DERP map in the health package whenever we fetch one, and using it when generating the notification text.
This way, the following message...
> Tailscale could not connect to the relay server '10'. The server might be temporarily unavailable, or your Internet connection might be down.
becomes:
> Tailscale could not connect to the 'Seattle' relay server. The server might be temporarily unavailable, or your Internet connection might be down.
which is a lot more user-friendly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Updates tailscale/tailscale#4136
This PR is the first round of work to move from encoding health warnings as strings and use structured data instead. The current health package revolves around the idea of Subsystems. Each subsystem can have (or not have) a Go error associated with it. The overall health of the backend is given by the concatenation of all these errors.
This PR polishes the concept of Warnable introduced by @bradfitz a few weeks ago. Each Warnable is a component of the backend (for instance, things like 'dns' or 'magicsock' are Warnables). Each Warnable has a unique identifying code. A Warnable is an entity we can warn the user about, by setting (or unsetting) a WarningState for it. Warnables have:
- an identifying Code, so that the GUI can track them as their WarningStates come and go
- a Title, which the GUIs can use to tell the user what component of the backend is broken
- a Text, which is a function that is called with a set of Args to generate a more detailed error message to explain the unhappy state
Additionally, this PR also begins to send Warnables and their WarningStates through LocalAPI to the clients, using ipn.Notify messages. An ipn.Notify is only issued when a warning is added or removed from the Tracker.
In a next PR, we'll get rid of subsystems entirely, and we'll start using structured warnings for all errors affecting the backend functionality.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var
that can be set for tailscale/tailscale container running as
a subnet router or exit node to enable UDP GRO forwarding
for improved performance.
See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes
This is currently considered an experimental approach;
the configuration support is partially to allow further experimentation
with containerized environments to evaluate the performance
improvements.
Updates tailscale/tailscale#12295
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The last suggested exit node needs to be incorporated in the decision
making process when a new suggestion is requested, but currently it is
not quite right: it'll be used if the suggestion code has an error or a
netmap is unavailable, but it won't be used otherwise.
Instead, this makes the last suggestion into a tiebreaker when making a
random selection between equally-good options. If the last suggestion
does not make it to the final selection pool, then a different
suggestion will be made.
Since LocalBackend.SuggestExitNode is back to being a thin shim that
sets up the parameters to suggestExitNode, it no longer needs a test.
Its test was unable to be comprehensive anyway as the code being tested
contains an uncontrolled random number generator.
Updates tailscale/corp#19681
Change-Id: I94ecc9a0d1b622de3df4ef90523f1d3e67b4bfba
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We assume most containers are immutable and don't expect tailscale
running in them to auto-update. But there's no reason to prohibit it
outright.
Ignore the tailnet-wide default auto-update setting in containers, but
allow local users to turn on auto-updates via the CLI.
RELNOTE=Auto-updates are allowed in containers, but ignore the tailnet-wide default.
Fixes#12292
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than building a new suggested exit node set every time, compute
it once on first use. Currently, syspolicy ensures that values do not
change without a restart anyway.
Since the set is being constructed in a separate func now, the test code
that manipulates syspolicy can live there, and the TestSuggestExitNode
can now run in parallel with other tests because it does not have global
dependencies.
Updates tailscale/corp#19681
Change-Id: Ic4bb40ccc91b671f9e542bd5ba9c96f942081515
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Clean up the updater goroutine on shutdown, in addition to doing that on
backend state change. This fixes a goroutine leak on shutdown in tests.
Updates #cleanup
When the client is disconnected from control for any reason (typically
just turned off), we should still attempt to update if auto-updates are
enabled. This may help users who turn tailscale on infrequently for
accessing resources.
RELNOTE: Apply auto-updates even if the node is down or disconnected
from the coordination server.
Updates #12117
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In order to test the sticky last suggestion code, a test was written for
LocalBackend.SuggestExitNode but it contains a random number generator
which makes writing comprehensive tests very difficult. This doesn't
change how the last suggestion works, but it adds some infrastructure to
make that easier in a later PR.
This adds func parameters for the two randomized parts: breaking ties
between DERP regions and breaking ties between nodes. This way tests can
validate the entire list of tied options, rather than expecting a
particular outcome given a particular random seed.
As a result of this, the global random number generator can be used
rather than seeding a local one each time.
In order to see the tied nodes for the location based (i.e. Mullvad)
case, pickWeighted needed to return a slice instead of a single
arbitrary option, so there is a small change in how that works.
Updates tailscale/corp#19681
Change-Id: I83c48a752abdec0f59c58ccfd8bfb3f3f17d0ea8
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The previous LocalBackend & CLI 'up' changes improved some stuff, but
might've been too aggressive in some edge cases.
This simplifies the authURL vs authURLSticky distinction and removes
the interact field, which seemed to just just be about duplicate URL
suppression in IPN bus, back from when the IPN bus was a single client
at a time. This moves that suppression to a different spot.
Fixes#12119
Updates #12028
Updates #12042
Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to Lock, Unlock, Lock, Unlock quite a few
times in Start resulting in all sorts of weird race
conditions. Simplify it all and only Lock/Unlock once.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
