These keys were intended to match the Apple platforms, but accidentally
used the wrong name.
Updates ENG-2133
Change-Id: I9ed7a17919e34e2d8896a5c64efc4d0c0003166e
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Add left and right padding around entire client so that the cards don't
run into the side of the screen. Also tighten up vertical spacing in
couple of places.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Before this fix, LikelyHomeRouterIP could return a 'self' IP that
doesn't correspond to the gateway address, since it picks the first
private address when iterating over the set interfaces as the 'self' IP,
without checking that the address corresponds with the
previously-detected gateway.
This behaviour was introduced by accident in aaf2df7, where we deleted
the following code:
for _, prefix := range privatev4s {
if prefix.Contains(gateway) && prefix.Contains(ip) {
myIP = ip
ok = true
return
}
}
Other than checking that 'gateway' and 'ip' were private IP addresses
(which were correctly replaced with a call to the netip.Addr.IsPrivate
method), it also implicitly checked that both 'gateway' and 'ip' were a
part of the *same* prefix, and thus likely to be the same interface.
Restore that behaviour by explicitly checking pfx.Contains(gateway),
which, given that the 'ip' variable is derived from our prefix 'pfx',
ensures that the 'self' IP will correspond to the returned 'gateway'.
Fixes#10466
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iddd2ee70cefb9fb40071986fefeace9ca2441ee6
Add metric logging logic for the web client frontend. This is an initial
pass of adding the base logic, plus a single point where it is used for
validation that the logging is working correctly. More metric logging
calls will follow in subsquent PRs.
Updates https://github.com/tailscale/tailscale/issues/10261
Signed-off-by: Mario Minardi <mario@tailscale.com>
If the login client is inside an iframe, open the management client in a
new window, since it can't be loaded in the frame.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
If the currently selected exit node is offline, render the exit node
selector in red with an error message. Update exit nodes in the dropdown
to indicate if they are offline, and don't allow them to be selected.
This also updates some older color values to use the new colors.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Makes the following changes:
* Use “link” class in various spots
* Remove button appearance on Exit Node dropdown in readonly mode
* Update `-stone-` colors to `-gray-` (couple spots missed by
original color config commit)
* Pull full ui/button component from admin panel, and update
buttons throughout UI to use this component
* Remove various buttons in readonly view to match mocks
* Add route (and “pending approval”) highlights to Subnet router
settings card
* Delete legacy client button styles from index.css
* Fix overflow of IPv6 address on device details view
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* cmd/k8s-operator: generate static manifests from Helm charts
This is done to ensure that there is a single source of truth
for the operator kube manifests.
Also adds linux node selector to the static manifests as
this was added as a default to the Helm chart.
Static manifests can now be generated by running
`go generate tailscale.com/cmd/k8s-operator`.
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
For use in ACL tests, we need a way to check whether a packet is allowed
not just with TCP, but any protocol.
Updates #3561
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Use the packet filter rules to determine if any device is allowed to
connect on port 5252. This does not check whether a specific device can
connect (since we typically don't know the source device when this is
used). Nor does it specifically check for wide-open ACLs, which is
something we may provide a warning about in the future.
Update the login popover content to display information when the src
device is unable to connect to the dst device over its Tailscale IP. If
we know it's an ACL issue, mention that, otherwise list a couple of
things to check. In both cases, link to a placeholder URL to get more
information about web client connection issues.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
This PR is all about adding functionality that will enable the installer's
upgrade sequence to terminate processes belonging to the previous version,
and then subsequently restart instances belonging to the new version within
the session(s) corresponding to the processes that were killed.
There are multiple parts to this:
* We add support for the Restart Manager APIs, which allow us to query the
OS for a list of processes locking specific files;
* We add the RestartableProcess and RestartableProcesses types that query
additional information about the running processes that will allow us
to correctly restart them in the future. These types also provide the
ability to terminate the processes.
* We add the StartProcessInSession family of APIs that permit us to create
new processes within specific sessions. This is needed in order to
properly attach a new GUI process to the same RDP session and desktop that
its previously-terminated counterpart would have been running in.
* I tweaked the winutil token APIs again.
* A lot of this stuff is pretty hard to test without a very elaborate
harness, but I added a unit test for the most complicated part (though it
requires LocalSystem to run).
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
When updating on Windows, we make a copy of the tailscale.exe file in a
temp directory to perform the update, because the original tailscale.exe
gets deleted during the update.
This can eat up disk space if a machine is stuck doing repeated failed
update attempts. Clean up old copies explicitly before making a new one,
same as we do with MSIs.
Updates #10082
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The recent addition of RequestID was only populated if the
HTTP Request had returned an error. This meant that the underlying
handler has no access to this request id and any logs it may have
emitted were impossible to correlate to that request id. Therefore,
this PR adds a middleware to generate request ids and pass them
through the request context. The tsweb.StdHandler automatically
populates this request id if the middleware is being used. Finally,
inner handlers can use the context to retrieve that same request id
and use it so that all logs and events can be correlated.
Updates #2549
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Adds policy keys ExitNodeID and ExitNodeIP.
Uses the policy keys to determine the exit node in preferences.
Fixestailscale/corp#15683
Signed-off-by: Claire Wang <claire@tailscale.com>
Fixes a TODO in web.authorizeRequest.
`getSession` calls `WhoIs` already. Call `getSession` earlier in
`authorizeRequest` so we can avoid the duplicate `WhoIs` check on
the same request.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds AllowedIPs to PeerStatus, allowing for easier lookup of the
routes allowed to be routed to a node. Will be using the AllowedIPs
of the self node from the web client interface to display approval
status of advertised routes.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
To be consistent with the formatting of other warnings, pass available
update health message instead of handling ClientVersion in he CLI.
Fixes#10312
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
client/web: skip check mode for non-tailscale.com control servers
Only enforce check mode if the control server URL ends in
".tailscale.com". This allows the web client to be used with headscale
(or other) control servers while we work with the project to add check
mode support (tracked in juanfont/headscale#1623).
Updates #10261
Co-authored-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
6e30c9d1f added eslint to the web client. As a part of that change,
the existing yarn.lock file was removed and yarn install run to build
with a clean yarn dependencies set with latest versions. This caused
a change in the "vite-plugin-rewrite-all" package that fails at build
time with our existing vite config. This is a known bug with some
suggested fixes:
https://vitejs.dev/guide/troubleshooting.html#this-package-is-esm-only
Rather than editing our package.json type, this commit reverts back
the yarn.lock file to it's contents at the commit just before 6e30c9d1f
and then only runs yarn install to add the new eslint packages, rather
than installing the latest versions of all packages.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add eslint to require stricter typescript rules, particularly around
required hook dependencies. This commit also updates any files that
were now throwing errors with eslint.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Enforcing inclusion of our OSS license at the top of .ts and .tsx
files. Also updates any relevant files in the repo that were
previously missing the license comment. An additional `@license`
comment is added to client/web/src/index.tsx to preserve the
license in generated Javascript.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Application code can call the tsnet s.CapturePcap(filename) method
to write all packets, sent and received, to a pcap file. The cleartext
packets are written, outside the Wireguard tunnel. This is expected
to be useful for debugging.
Updates https://github.com/tailscale/tailscale/issues/9707
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
We warn users about IP forwarding being disabled when using
`--avertise-routes` in `tailscale up`, this adds the same warnings
to `tailscale set`.
Updates tailscale/corp#9968
Signed-off-by: Jenny Zhang <jz@tailscale.com>
* cmd/containerboot: proxy traffic to tailnet target defined by FQDN
Add a new Service annotation tailscale.com/tailnet-fqdn that
users can use to specify a tailnet target for which
an egress proxy should be deployed in the cluster.
Updates tailscale/tailscale#10280
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
If I have to add a tail, or a scale, mate, I will add it.
Updates tailscale/corp#14698
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
