Running corp/ipn#TestNetworkLockE2E has a 1/300 chance of failing, and
deskchecking suggests thats whats happening are two netmaps are racing each
other to be processed through tkaSyncIfNeededLocked. This happens in the
first place because we release b.mu during network RPCs.
To fix this, we make the tka sync logic an exclusive section, so two
netmaps will need to wait for tka sync to complete serially (which is what
we would want anyway, as the second run through probably wont need to
sync).
Signed-off-by: Tom DNetto <tom@tailscale.com>
TLS prober now checks validity period for all server certificates
and verifies OCSP revocation status for the leaf cert.
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
- At high data rates more buffer space is required in order to avoid
packet loss during any cause of delay.
- On slower machines more buffer space is required in order to avoid
packet loss while decryption & tun writing is underway.
- On higher latency network paths more buffer space is required in order
to overcome BDP.
- On Linux set with SO_*BUFFORCE to bypass net.core.{r,w}mem_max.
- 7MB is the current default maximum on macOS 12.6
- Windows test is omitted, as Windows does not support getsockopt for
these options.
Signed-off-by: James Tucker <james@tailscale.com>
The mobile implementation had a 2 minute ticker going all the time
to do a channel send. Instead, schedule it as needed based on activity.
Then we can be actually idle for long periods of time.
Updates #3363
Change-Id: I0dba4150ea7b94f74382fbd10db54a82f7ef6c29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If netcheck happens before there's a derpmap.
This seems to only affect Headscale because it doesn't send a derpmap
as early?
Change-Id: I51e0dfca8e40623e04702bc9cc471770ca20d2c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NewNetcheckClient only initializes a subset of fields of derphttp.Client,
and the Close() call added by #5707 was result in a nil pointer dereference.
Make Close() safe to call when using NewNetcheckClient() too.
Fixes#5919
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Always set the MTU to the Tailscale default MTU. In practice we are
missing applying an MTU for IPv6 on Windows prior to this patch.
This is the simplest patch to fix the problem, the code in here needs
some more refactoring.
Fixes#5914
Signed-off-by: James Tucker <james@tailscale.com>
This sets up Logger to handle statistics at the magicsock layer,
where we can correlate traffic between a particular tailscale IP address
and any number of physical endpoints used to contact the node
that hosts that tailscale address.
We also export Message and TupleCounts to better document the JSON format
that is being sent to the logging infrastructure.
This commit does NOT yet enable the actual logging of magicsock statistics.
That will be a future commit.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If the wgcfg.Config is specified with network logging arguments,
then Userspace.Reconfig starts up an asynchronous network logger,
which is shutdown either upon Userspace.Close or when Userspace.Reconfig
is called again without network logging or route arguments.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The Logger type managers a logtail.Logger for extracting
statistics from a tstun.Wrapper.
So long as Shutdown is called, it ensures that logtail
and statistic gathering resources are properly cleared up.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
For future use in magicsock tests.
Updates #540
Change-Id: I2f07d1a2924f20b36e357c4533ff0a1a974d5061
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We did not get this VERSION.txt file checked in at the correct time,
the prior 10 commits in `main` between the v1.32.0 tag point and
this commit were not part of release 1.32. We did no unstable builds
during this time, so the error should have no impact.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
If the username includes a suffix of +password, then we accept
password auth and just let them in like it were no auth.
This exists purely for SSH clients that get confused by seeing success
to their initial auth type "none".
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I616d4c64d042449fb164f615012f3bae246e91ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When Tailscale is installed via Homebrew, `/usr/local/bin/tailscaled`
is a symlink to the actual binary.
Now when `tailscaled install-system-daemon` runs, it will not attempt
to overwrite that symlink if it already points to the tailscaled binary.
However, if executed binary and the link target differ, the path will
he overwritten - this can happen when a user decides to replace
Homebrew-installed tailscaled with a one compiled from source code.
Fixes#5353
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
188.166.70.128 port 2222 for now. Some hostname later maybe.
Change-Id: I9c329410035221ed6cdff7a482727d30b77eea8b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Send two banners with a second in between, this demonstrates the case
where all banners are shown after auth completes and not during.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes the ~9 allocs added by #5869, while still keeping struct
fields sorted (the previous commit's tests still pass). And add a test
to lock it in that this shouldn't allocate.
Updates #5778
Change-Id: I4c12b9e2a1334adc1ea5aba1777681cb9fc18fbf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For SSH client authors to fix their clients without setting up
Tailscale stuff.
Change-Id: I8c7049398512de6cb91c13716d4dcebed4d47b9c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was preventing tailscaled from shutting down properly if there were
active sessions in certain states (e.g. waiting in check mode).
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes it easier to view prometheus metrics.
Added a test case which demonstrates the new behavior - the test
initially failed as the output was ordered in the same order
as the fields were declared in the struct (i.e. foo_a, bar_a, foo_b,
bar_b). For that reason, I also had to change an existing test case
to sort the fields in the new expected order.
Signed-off-by: Hasnain Lakhani <m.hasnain.lakhani@gmail.com>
The macOS and iOS apps that used the /localapi/v0/file-targets handler
were getting too many candidate targets. They wouldn't actually accept
the file. This is effectively just a UI glitch in the wrong hosts
being listed as valid targets from the source side.
Change-Id: I6907a5a1c3c66920e5ec71601c044e722e7cb888
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was assumed to be the fix for mosh not working, however turns out
all we really needed was the duplicate fd also introduced in the same
commit (af412e8874).
Fixes#5103
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The node and domain audit log IDs are provided in the map response,
but are ultimately going to be used in wgengine since
that's the layer that manages the tstun.Wrapper.
Do the plumbing work to get this field passed down the stack.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The window may not end up getting unloaded (if other beforeunload
handlers prevent the event), thus we should only close the SSH session
if it's truly getting unloaded.
Updates tailscale/corp#7304
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Rename StatisticsEnable as SetStatisticsEnabled to be consistent
with other similarly named methods.
Rename StatisticsExtract as ExtractStatistics to follow
the convention where methods start with a verb.
It was originally named with Statistics as a prefix so that
statistics related methods would sort well in godoc,
but that property no longer holds.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Upstream optimizations to the Go time package will make
unmarshaling of time.Time 3-6x faster. See:
* https://go.dev/cl/425116
* https://go.dev/cl/425197
* https://go.dev/cl/429862
The last optimization avoids a []byte -> string allocation
if the timestamp string less than than 32B.
Unfortunately, the presence of a timezone breaks that optimization.
Drop recording of timezone as this is non-essential information.
Most of the performance gains is upon unmarshal,
but there is also a slight performance benefit to
not marshaling the timezone as well.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The copy ID operates similar to a CC in email where
a message is sent to both the primary ID and also the copy ID.
A given log message is uploaded once, but the log server
records it twice for each ID.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
