We issue redirects in a few different places, it's time to have
a common helper to do target validation.
Updates tailscale/corp#16875
Signed-off-by: David Anderson <danderson@tailscale.com>
* VERSION.txt: this is v1.58.0
Signed-off-by: kari-ts <kari@tailscale.com>
* VERSION.txt: this is v1.59.0
---------
Signed-off-by: kari-ts <kari@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are
available at:
http://localhost:12345/debug/metrics
Updates #8210
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8
For use in corp, where we appear to have re-implemented this in a few
places with varying signatures.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id863a87e674f3caa87945519be8e09650e9c1d76
If there are routes changes as a side effect of an app connector
configuration update, the connector configuration may want to reenter a
lock, so must be started asynchronously.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
This is a useful primitive for asynchronous execution of ordered work I
want to use in another change.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Control can now send down a set of routes along with the domains, and
the routes will be advertised, with any newly overlapped routes being
removed to reduce the size of the routing table.
Fixestailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
To reduce the likelihood of breaking users,
if we implement stricter Exact path type matching in the future.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
The lack of type-safety in context.WithValue leads to the common pattern
of defining of package-scoped type to ensure global uniqueness:
type fooKey struct{}
func withFoo(ctx context, v Foo) context.Context {
return context.WithValue(ctx, fooKey{}, v)
}
func fooValue(ctx context) Foo {
v, _ := ctx.Value(fooKey{}).(Foo)
return v
}
where usage becomes:
ctx = withFoo(ctx, foo)
foo := fooValue(ctx)
With many different context keys, this can be quite tedious.
Using generics, we can simplify this as:
var fooKey = ctxkey.New("mypkg.fooKey", Foo{})
where usage becomes:
ctx = fooKey.WithValue(ctx, foo)
foo := fooKey.Value(ctx)
See https://go.dev/issue/49189
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
When establishing connections to the ipnserver, we validate that the
local user is allowed to connect. If Tailscale is currently being
managed by a different user (primarily for multi-user Windows installs),
we don't allow the connection.
With the new device web UI, the inbound connection is coming from
tailscaled itself, which is often running as "NT AUTHORITY\SYSTEM".
In this case, we still want to allow the connection, even though it
doesn't match the user running the Tailscale GUI. The SYSTEM user has
full access to everything on the system anyway, so this doesn't escalate
privileges.
Eventually, we want the device web UI to run outside of the tailscaled
process, at which point this exception would probably not be needed.
Updates tailscale/corp#16393
Signed-off-by: Will Norris <will@tailscale.com>
See the field alignment lints for more information.
Reductions are 64->24 and 64->32 respectively.
Updates #self
Signed-off-by: James Tucker <james@tailscale.com>
This change adds a description to the exit-node CLI command. This
description will be displayed when using `tailscale -h` and `tailscale
exit-node -h`.
Fixes#10787
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The manage client always listens on http (non-secure) port 5252. If the
login client is loaded over https, then the connectivity check to `/ok`
will fail with a mixed-content error. Mixed-content enforcement is a
browser setting that we have no control over, so there's no way around
this.
In this case of the login client being loaded over https, we skip the
connectivity check entirely. We will always render the sign-in button,
though we don't know for sure if the user has connectivity, so we
provide some additional help text in case they have trouble signing in.
Updates hassio-addons/addon-tailscale#314
Signed-off-by: Will Norris <will@tailscale.com>
Observed on one busy derp node, there were 600 goroutines blocked
writing to this channel, which represents not only more blocked routines
than we need, but also excess wake-ups downstream as the latent
goroutines writes represent no new work.
Updates #self
Signed-off-by: James Tucker <james@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: fix base truncating for extra long Service names
StatefulSet names for ingress/egress proxies are calculated
using Kubernetes name generator and the parent resource name
as a base.
The name generator also cuts the base, but has a higher max cap.
This commit fixes a bug where, if we get a shortened base back
from the generator, we cut off too little as the base that we
have cut will be passed into the generator again, which will
then itself cut less because the base is shorter- so we end up
with a too long name again.
Updates tailscale/tailscale#10807
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
Sets up peer capability types for future use within the web client
views and APIs.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This is in response to logs from a customer that show that we're unable
to run netsh due to the following error:
router: firewall: adding Tailscale-Process rule to allow UDP for "C:\\Program Files\\Tailscale\\tailscaled.exe" ...
router: firewall: error adding Tailscale-Process rule: exec: "netsh": cannot run executable found relative to current directory:
There's approximately no reason to ever dynamically look up the path of
a system utility like netsh.exe, so instead let's first look for it
in the System32 directory and only if that fails fall back to the
previous behaviour.
Updates #10804
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I68cfeb4cab091c79ccff3187d35f50359a690573
Build dev tailscale and k8s-operator images for linux/amd64 only by default,
make it possible to configure target build platform via PLATFORM var.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is useful to build local binaries with custom versions to test
version-specific logic (like updates).
Updates https://github.com/tailscale/corp/issues/16703
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Use the helper method from the version package to detect that we are
running the macsys network extension. This method does the same check
for the HOME environment variable (which works fine in most cases) as
well as the name of the executable (which is needed for the web client).
Updates tailscale/corp#16393
Signed-off-by: Will Norris <will@tailscale.com>
cmd/k8s-operator: add CRD to chart and static manifest
Add functionality to insert CRD to chart at package time.
Insert CRD to static manifests as this is where they are currently consumed from.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Prints a helpful message with the web UI's address when running
tailscale set --webclient.
Updates tailscale/corp#16345
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients.
Enables resume logic to be usable for Apple clients.
Fixestailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
The prefix has space for 32-bit site IDs, but the validateViaPrefix
function would previously have disallowed site IDs greater than 255.
Fixestailscale/corp#16470
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
