The macOS client was forgetting to call netstack.Impl.SetLocalBackend.
Change the API so that it can't be started without one, eliminating this
class of bug. Then update all the callers.
Updates #6764
Change-Id: I2b3a4f31fdfd9fdbbbbfe25a42db0c505373562f
Signed-off-by: Claire Wang <claire@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All IPv6 packets for the self address were doing netip.Prefix.Contains
lookups.
If if we know they're for a self address (which we already previously
computed and have sitting in a bool), then they can't be for a 4via6
range.
Change-Id: Iaaaf1248cb3fecec229935a80548ead0eb4cb892
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was eating TCP packets to peerapi ports to subnet routers. Some of
the TCP flow's packets went onward, some got eaten. So some TCP flows
to subnet routers, if they used an unfortunate TCP port number, got
broken.
Change-Id: Ifea036119ccfb081f4dfa18b892373416a5239f8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's leftover from an earlier Tailscale SSH wiring and I forgot to
delete it apparently.
Change-Id: I14f071f450e272b98d90080a71ce68ba459168d1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Setting TCP KeepAlives for Tailscale SSH connections results in them
unnecessarily disconnecting. However, we can't turn them off completely
as that would mean we start leaking sessions waiting for a peer to come
back which may have gone away forever (e.g. if the node was deleted from
the tailnet during a session).
Updates #5021
Signed-off-by: Maisem Ali <maisem@tailscale.com>
TCP selective acknowledgement can improve throughput by an order
of magnitude in the presence of loss.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
As the comment in the code says, netstack should always respond to ICMP
echo requests to a 4via6 address, even if the netstack instance isn't
normally processing subnet traffic.
Follow-up to #5709
Change-Id: I504d0776c5824071b2a2e0e687bc33e24f6c4746
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
If we accept a forwarded TCP connection before dialing, we can
erroneously signal to a client that we support IPv6 (or IPv4) without
that actually being possible. Instead, we only complete the client's TCP
handshake after we've dialed the outbound connection; if that fails, we
respond with a RST.
Updates #5425 (maybe fixes!)
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Per post-submit code review feedback of 1336fb740b from @maisem.
Change-Id: Ic5c16306cbdee1029518448642304981f77ea1fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* net/dns, wgengine: implement DNS over TCP
Signed-off-by: Tom DNetto <tom@tailscale.com>
* wgengine/netstack: intercept only relevant port/protocols to quad-100
Signed-off-by: Tom DNetto <tom@tailscale.com>
This change wires netstack with a hook for traffic coming from the host
into the tun, allowing interception and handling of traffic to quad-100.
With this hook wired, magicDNS queries over UDP are now handled within
netstack. The existing logic in wgengine to handle magicDNS remains for now,
but its hook operates after the netstack hook so the netstack implementation
takes precedence. This is done in case we need to support platforms with
netstack longer than expected.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Setting keepalive ensures that idle connections will eventually be
closed. In userspace mode, any application configured TCP keepalive is
effectively swallowed by the host kernel, and is not easy to detect.
Failure to close connections when a peer tailscaled goes offline or
restarts may result in an otherwise indefinite connection for any
protocol endpoint that does not initiate new traffic.
This patch does not take any new opinion on a sensible default for the
keepalive timers, though as noted in the TODO, doing so likely deserves
further consideration.
Update #4522
Signed-off-by: James Tucker <james@tailscale.com>
Remove the weird netstack -> tailssh dependency and instead have tailssh
register itself with ipnlocal when linked.
This makes tailssh.server a singleton, so we can have a global map of
all sessions.
Updates #3802
Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)
e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:
tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112
(112 being /128 minuse the /96 v6 prefix length)
Then people in my tailnet can:
$ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....
Updates #3616, etc
RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes
Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In addition an envknob (TS_DEBUG_NETSTACK_LEAK_MODE) now provides access
to set leak tracking to more useful values.
Fixes#4309
Signed-off-by: James Tucker <james@tailscale.com>
Plumb the outbound injection path to allow passing netstack
PacketBuffers down to the tun Read, where they are decref'd to enable
buffer re-use. This removes one packet alloc & copy, and reduces GC
pressure by pooling outbound injected packets.
Fixes#2741
Signed-off-by: James Tucker <james@tailscale.com>
Still largely incomplete, but in a better home now.
Updates #3802
Change-Id: I46c5ffdeb12e306879af801b06266839157bc624
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're finding a bunch of host operating systems/firewalls interact poorly
with peerapi. We either get ICMP errors from the host or users need to run
commands to allow the peerapi port:
https://github.com/tailscale/tailscale/issues/3842#issuecomment-1025133727
... even though the peerapi should be an internal implementation detail.
Rather than fight the host OS & firewalls, this change handles the
server side of peerapi entirely in netstack (except on iOS), so it
never makes its way to the host OS where it might be messed with. Two
main downsides are:
1) netstack isn't as fast, but we don't really need speed for peerapi.
And actually, with fewer trips to/from the kernel, we might
actually make up for some of the netstack performance loss by
staying in userspace.
2) tcpdump / Wireshark etc packet captures will no longer see the peerapi
traffic. Oh well. Crawshaw's been wanting to add packet capture server
support to tailscaled, so we'll probably do that sooner now.
A future change might also then use peerapi for the client-side
(except on iOS).
Updates #3842 (probably fixes, as well as many exit node issues I bet)
Change-Id: Ibc25edbb895dc083d1f07bd3cab614134705aa39
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.
This is that experiment.
Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)
Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Disabled by default.
To use, run tailscaled with:
TS_SSH_ALLOW_LOGIN=you@bar.com
And enable with:
$ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true
Then ssh [any-user]@[your-tailscale-ip] for a root bash shell.
(both the "root" and "bash" part are temporary)
Updates #3802
Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
-W is milliseconds on darwin, not seconds, and empirically it's
milliseconds after a 1 second base.
Change-Id: I2520619e6699d9c505d9645ce4dfee4973555227
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Except for the super verbose packet-level dumps. Keep those disabled
by default with a const.
Updates #2642
Change-Id: Ia9eae1677e8b3fe6f457a59e44896a335d95d547
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
