This commit replaces usage of local.Client in net/udprelay with DERPMap
plumbing over the eventbus. This has been a longstanding TODO. This work
was also accelerated by a memory leak in net/http when using
local.Client over long periods of time. So, this commit also addresses
said leak.
Updates #17801
Signed-off-by: Jordan Whited <jordan@tailscale.com>
They distracted me in some refactoring. They're set but never used.
Updates #17858
Change-Id: I6ec7d6841ab684a55bccca7b7cbf7da9c782694f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#31571
It appears that on the latest macOS, iOS and tVOS versions, the work
that netns is doing to bind outgoing connections to the default interface (and all
of the trimmings and workarounds in netmon et al that make that work) are
not needed. The kernel is extension-aware and doing nothing, is the right
thing. This is, however, not the case for tailscaled (which is not a
special process).
To allow us to test this assertion (and where it might break things), we add a
new node cap that turns this behaviour off only for network-extension equipped clients,
making it possible to turn this off tailnet-wide, without breaking any tailscaled
macos nodes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Unfortunately I closed the tab and lost it in my sea of CI failures
I'm currently fighting.
Updates #cleanup
Change-Id: I4e3a652d57d52b75238f25d104fc1987add64191
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When systemd notification support was omitted from the build, or on
non-Linux systems, we were unnecessarily emitting code and generating
garbage stringifying addresses upon transition to the Running state.
Updates #12614
Change-Id: If713f47351c7922bb70e9da85bf92725b25954b9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* lock released early just to call `b.send` when it can call
`b.sendToLocked` instead
* `UnlockEarly` called to release the lock before trivially fast
operations, we can wait for a defer there
Updates #11649
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adds a new Redirect field to HTTPHandler for serving HTTP redirects
from the Tailscale serve config. The redirect URL supports template
variables ${HOST} and ${REQUEST_URI} that are resolved per request.
By default, it redirects using HTTP Status 302 (Found). For another
redirect status, like 301 - Moved Permanently, pass the HTTP status
code followed by ':' on Redirect, like: "301:https://tailscale.com"
Updates #11252
Updates #11330
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
A follow-up to #17411. Put AppConnector events into a task queue, as they may
take some time to process. Ensure that the queue is stopped at shutdown so that
cleanup will remain orderly.
Because events are delivered on a separate goroutine, slow processing of an
event does not cause an immediate problem; however, a subscriber that blocks
for a long time will push back on the bus as a whole. See
https://godoc.org/tailscale.com/util/eventbus#hdr-Expected_subscriber_behavior
for more discussion.
Updates #17192
Updates #15160
Change-Id: Ib313cc68aec273daf2b1ad79538266c81ef063e3
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Also consolidates variable and header naming and amends the
CLI behavior
* multiple app-caps have to be specified as comma-separated
list
* simple regex-based validation of app capability names is
carried out during flag parsing
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
Given that we filter based on the usercaps argument now, truncation
should not be necessary anymore.
Updates tailscale/corp/#28372
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
Temporarily back out the TPM-based hw attestation code while we debug
Windows exceptions.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
If you run tailscaled without passing a `--statedir`, Tailnet Lock is
unavailable -- we don't have a folder to store the AUMs in.
This causes a lot of unnecessary requests to bootstrap TKA, because
every time the node receives a NetMap with some TKA state, it tries to
bootstrap, fetches the bootstrap TKA state from the control plane, then
fails with the error:
TKA sync error: bootstrap: network-lock is not supported in this
configuration, try setting --statedir
We can't prevent the error, but we can skip the control plane request
that immediately gets dropped on the floor.
In local testing, a new node joining a tailnet caused *three* control
plane requests which were unused.
Updates tailscale/corp#19441
Signed-off-by: Alex Chan <alexc@tailscale.com>
Check that the TPM we have opened is advertised as a 2.0 family device
before using it for state sealing / hardware attestation.
Updates #17622
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
* When we do the TKA sync, log whether TKA is enabled and whether
we want it to be enabled. This would help us see if a node is
making bootstrap errors.
* When we fail to look up an AUM locally, log the ID of the AUM
rather than a generic "file does not exist" error.
These AUM IDs are cryptographic hashes of the TKA state, which
itself just contains public keys and signatures. These IDs aren't
sensitive and logging them is safe.
Signed-off-by: Alex Chan <alexc@tailscale.com>
Updates https://github.com/tailscale/corp/issues/33594
This does not change which subscriptions are made, it only swaps them to use
the SubscribeFunc API instead of Subscribe.
Updates #15160
Updates #17487
Change-Id: Id56027836c96942206200567a118f8bcf9c07f64
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
This commit adds the subcommands `get-config` and `set-config` to Serve,
which can be used to read the current Tailscale Services configuration
in a standard syntax and provide a configuration to declaratively apply
with that same syntax.
Both commands must be provided with either `--service=svc:service` for
one service, or `--all` for all services. When writing a config,
`--set-config --all` will overwrite all existing Services configuration,
and `--set-config --service=svc:service` will overwrite all
configuration for that particular Service. Incremental changes are not
supported.
Fixestailscale/corp#30983.
cmd/tailscale/cli: hide serve "get-config"/"set-config" commands for now
tailscale/corp#33152 tracks unhiding them when docs exist.
Signed-off-by: Naman Sood <mail@nsood.in>
Saves ~94 KB from the min build.
Updates #12614
Change-Id: I3b0b8a47f80b9fd3b1038c2834b60afa55bf02c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Before we introduced seamless, the "blocked" state was used to track:
* Whether a login was required for connectivity, and therefore we should
keep the engine deconfigured until that happened
* Whether authentication was in progress
"blocked" would stop authReconfig from running. We want this when a login is
required: if your key has expired we want to deconfigure the engine and keep
it down, so that you don't keep using exit nodes (which won't work because
your key has expired).
Taking the engine down while auth was in progress was undesirable, so we
don't do that with seamless renewal. However, not entering the "blocked"
state meant that we needed to change the logic for when to send
LoginFinished on the IPN bus after seeing StateAuthenticated from the
controlclient. Initially we changed the "if blocked" check to "if blocked or
seamless is enabled" which was correct in other places.
In this place however, it introduced a bug: we are sending LoginFinished
every time we see StateAuthenticated, which happens even on a down & up, or
a profile switch. This in turn made it harder for UI clients to track when
authentication is complete.
Instead we should only send it out if we were blocked (i.e. seamless is
disabled, or our key expired) or an auth was in progress.
Updates tailscale/corp#31476
Updates tailscale/corp#32645
Fixes#17363
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Saves 45 KB from the min build, no longer pulling in deephash or
util/hashx, both with unsafe code.
It can actually be more efficient to not use deephash, as you don't
have to walk all bytes of all fields recursively to answer that two
things are not equal. Instead, you can just return false at the first
difference you see. And then with views (as we use ~everywhere
nowadays), the cloning the old value isn't expensive, as it's just a
pointer under the hood.
Updates #12614
Change-Id: I7b08616b8a09b3ade454bb5e0ac5672086fe8aec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some of the test cases access fields of the backend that are supposed to be
locked while the test is running, which can trigger the race detector. I fixed
a few of these in #17411, but I missed these two cases.
Updates #15160
Updates #17192
Change-Id: I45664d5e34320ecdccd2844e0f8b228145aaf603
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Add subscribers for AppConnector events
Make the RouteAdvertiser interface optional We cannot yet remove it because
the tests still depend on it to verify correctness. We will need to separately
update the test fixtures to remove that dependency.
Publish RouteInfo via the event bus, so we do not need a callback to do that.
Replace it with a flag that indicates whether to treat the route info the connector
has as "definitive" for filtering purposes.
Update the tests to simplify the construction of AppConnector values now that a
store callback is no longer required. Also fix a couple of pre-existing racy tests that
were hidden by not being concurrent in the same way production is.
Updates #15160
Updates #17192
Change-Id: Id39525c0f02184e88feaf0d8a3c05504850e47ee
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
If we received a wg engine status while processing an auth URL, there was a
race condition where the authURL could be reset to "" immediately after we
set it.
To fix this we need to check that we are moving from a non-Running state to
a Running state rather than always resetting the URL when we "move" into a
Running state even if that is the current state.
We also need to make sure that we do not return from stopEngineAndWait until
the engine is stopped: before, we would return as soon as we received any
engine status update, but that might have been an update already in-flight
before we asked the engine to stop. Now we wait until we see an update that
is indicative of a stopped engine, or we see that the engine is unblocked
again, which indicates that the engine stopped and then started again while
we were waiting before we checked the state.
Updates #17388
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Co-authored-by: Nick Khyl <nickk@tailscale.com>
Saves ~102 KB from the min build.
Updates #12614
Change-Id: Ie1d4f439321267b9f98046593cb289ee3c4d6249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This patch removes some code that didn’t get removed before merging
the changes in #16580.
Updates #cleanup
Updates #16551
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When running integration tests on macOS, we get a panic from a nil
pointer dereference when calling `ci.creds.PID()`.
This panic occurs because the `ci.creds != nil` check is insufficient
after a recent refactoring (c45f881) that changed `ci.creds` from a
pointer to the `PeerCreds` interface. Now `ci.creds` always compares as
non-nil, so we enter this block even when the underlying value is nil.
The integration tests fail on macOS when `peercred.Get()` returns the
error `unix.GetsockoptInt: socket is not connected`. This error isn't
new, and the previous code was ignoring it correctly.
Since we trust that `peercred` returns either a usable value or an error,
checking for a nil error is a sufficient and correct gate to prevent the
method call and avoid the panic.
Fixes#17421
Signed-off-by: Alex Chan <alexc@tailscale.com>
The control plane will sometimes determine that a node is not online,
while the node is still able to connect to its peers. This patch
doesn’t solve this problem, but it does mitigate it.
This PR introduces the `client-side-reachability` node attribute that
switches the node to completely ignore the online signal from control.
In the future, the client itself should collect reachability data from
active Wireguard flows and Tailscale pings.
Updates #17366
Updates tailscale/corp#30379
Updates tailscale/corp#32686
Signed-off-by: Simon Law <sfllaw@tailscale.com>
A recent change (009d702adf) introduced a deadlock where the
/machine/update-health network request to report the client's health
status update to the control plane was moved to being synchronous
within the eventbus's pump machinery.
I started to instead make the health reporting be async, but then we
realized in the three years since we added that, it's barely been used
and doesn't pay for itself, for how many HTTP requests it makes.
Instead, delete it all and replace it with a c2n handler, which
provides much more helpful information.
Fixestailscale/corp#32952
Change-Id: I9e8a5458269ebfdda1c752d7bbb8af2780d71b04
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Whenever running on a platform that has a TPM (and tailscaled can access
it), default to encrypting the state. The user can still explicitly set
this flag to disable encryption.
Updates https://github.com/tailscale/corp/issues/32909
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Require the presence of the bus, but do not use it yet. Check for required
fields and update tests and production use to plumb the necessary arguments.
Updates #15160
Updates #17192
Change-Id: I8cefd2fdb314ca9945317d3320bd5ea6a92e8dcb
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
