We were selectively uploading it, but we were still gathering it,
which can be a waste of CPU.
Also remove a bunch of complexity that I don't think matters anymore.
And add an envknob to force service collection off on a single node,
even if the tailnet policy permits it.
Fixes#13463
Change-Id: Ib6abe9e29d92df4ffa955225289f045eeeb279cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
this commit changes usermetrics to be non-global, this is a building
block for correct metrics if a go process runs multiple tsnets or
in tests.
Updates #13420
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Updates tailscale/tailscale#13326
Adds a CLI subcommand to perform DNS queries using the internal DNS forwarder and observe its internals (namely, which upstream resolvers are being used).
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This mimics having Tailscale in the 'Stopped' state by programming an
empty DNS configuration when the current node key is expired.
Updates tailscale/support-escalations#55
Change-Id: I68ff4665761fb621ed57ebf879263c2f4b911610
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
When a rotation signature chain reaches a certain size, remove the
oldest rotation signature from the chain before wrapping it in a new
rotation signature.
Since all previous rotation signatures are signed by the same wrapping
pubkey (node's own tailnet lock key), the node can re-construct the
chain, re-signing previous rotation signatures. This will satisfy the
existing certificate validation logic.
Updates #13185
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Updates tailscale/tailscale#13326
This PR begins implementing a `tailscale dns` command group in the Tailscale CLI. It provides an initial implementation of `tailscale dns status` which dumps the state of the internal DNS forwarder.
Two new endpoints were added in LocalAPI to support the CLI functionality:
- `/netmap`: dumps a copy of the last received network map (because the CLI shouldn't have to listen to the ipn bus for a copy)
- `/dns-osconfig`: dumps the OS DNS configuration (this will be very handy for the UI clients as well, as they currently do not display this information)
My plan is to implement other subcommands mentioned in tailscale/tailscale#13326, such as `query`, in later PRs.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This PR changes how LocalBackend handles interactive (initiated via StartLoginInteractive) and non-interactive (e.g., due to key expiration) logins,
and when it sends the authURL to the connected clients.
Specifically,
- When a user initiates an interactive login by clicking Log In in the GUI, the LocalAPI calls StartLoginInteractive.
If an authURL is available and hasn't expired, we immediately send it to all connected clients, suggesting them to open that URL in a browser.
Otherwise, we send a login request to the control plane and set a flag indicating that an interactive login is in progress.
- When LocalBackend receives an authURL from the control plane, we check if it differs from the previous one and whether an interactive login
is in progress. If either condition is true, we notify all connected clients with the new authURL and reset the interactive login flag.
We reset the auth URL and flags upon a successful authentication, when a different user logs in and when switching Tailscale login profiles.
Finally, we remove the redundant dedup logic added to WatchNotifications in #12096 and revert the tests to their original state to ensure that
calling StartLoginInteractive always produces BrowseToURL notifications, either immediately or when the authURL is received from the control plane.
Fixes#13296
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The LocalBackend's state machine starts in NoState and soon transitions to NeedsLogin if there's no auto-start profile,
with the profileManager starting with a new empty profile. Notably, entering the NeedsLogin state blocks engine updates.
We expect the user to transition out of this state by logging in interactively, and we set WantRunning to true when
controlclient enters the StateAuthenticated state.
While our intention is correct, and completing an interactive login should set WantRunning to true, our assumption
that logging into the current Tailscale profile is the only way to transition out of the NeedsLogin state is not accurate.
Another common transition path includes an explicit profile switch (via LocalBackend.SwitchProfile) or an implicit switch
when a Windows user connects to the backend. This results in a bug where WantRunning is set to true even when it was
previously set to false, and the user expressed no intention of changing it.
A similar issue occurs when switching from (sic) a Tailnet that has seamlessRenewalEnabled, regardless of the current state
of the LocalBackend's state machine, and also results in unexpectedly set WantRunning. While this behavior is generally
undesired, it is also incorrect that it depends on the control knobs of the Tailnet we're switching from rather than
the Tailnet we're switching to. However, this issue needs to be addressed separately.
This PR updates LocalBackend.SetControlClientStatus to only set WantRunning to true in response to an interactive login
as indicated by a non-empty authURL.
Fixes#6668Fixes#11280
Updates #12756
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In preparation for multi-user and unattended mode improvements, we are
refactoring and cleaning up `ipn/ipnlocal.profileManager`. The concept of the
"current user", which is only relevant on Windows, is being deprecated and will
soon be removed to allow more than one Windows user to connect and utilize
`LocalBackend` according to that user's access rights to the device and specific
Tailscale profiles.
We plan to pass the user's identity down to the `profileManager`, where it can
be used to determine the user's access rights to a given `LoginProfile`. While
the new permission model in `ipnauth` requires more work and is currently
blocked pending PR reviews, we are updating the `profileManager` to reduce its
reliance on the concept of a single OS user being connected to the backend at
the same time.
We extract the switching to the default Tailscale profile, which may also
trigger legacy profile migration, from `profileManager.SetCurrentUserID`. This
introduces `profileManager.DefaultUserProfileID`, which returns the default
profile ID for the current user, and `profileManager.SwitchToDefaultProfile`,
which is essentially a shorthand for `pm.SwitchProfile(pm.DefaultUserProfileID())`.
Both methods will eventually be updated to accept the user's identity and
utilize that user's default profile.
We make access checks more explicit by introducing the `profileManager.checkProfileAccess`
method. The current implementation continues to use `profileManager.currentUserID`
and `LoginProfile.LocalUserID` to determine whether access to a given profile
should be granted. This will be updated to utilize the `ipnauth` package and the
new permissions model once it's ready. We also expand access checks to be used
more widely in the `profileManager`, not just when switching or listing
profiles. This includes access checks in methods like `SetPrefs` and, most notably,
`DeleteProfile` and `DeleteAllProfiles`, preventing unprivileged Windows users
from deleting Tailscale profiles owned by other users on the same device,
including profiles owned by local admins.
We extract `profileManager.ProfilePrefs` and `profileManager.SetProfilePrefs`
methods that can be used to get and set preferences of a given `LoginProfile` if
`profileManager.checkProfileAccess` permits access to it.
We also update `profileManager.setUnattendedModeAsConfigured` to always enable
unattended mode on Windows if `Prefs.ForceDaemon` is true in the current
`LoginProfile`, even if `profileManager.currentUserID` is `""`. This facilitates
enabling unattended mode via `tailscale up --unattended` even if
`tailscale-ipn.exe` is not running, such as when a Group Policy or MDM-deployed
script runs at boot time, or when Tailscale is used on a Server Code or otherwise
headless Windows environments. See #12239, #2137, #3186 and
https://github.com/tailscale/tailscale/pull/6255#issuecomment-2016623838 for
details.
Fixes#12239
Updates tailscale/corp#18342
Updates #3186
Updates #2137
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, we use PermitRead/PermitWrite/PermitCert permission flags to determine which operations are allowed for a LocalAPI client.
These checks are performed when localapi.Handler handles a request. Additionally, certain operations (e.g., changing the serve config)
requires the connected user to be a local admin. This approach is inherently racey and is subject to TOCTOU issues.
We consider it to be more critical on Windows environments, which are inherently multi-user, and therefore we prevent more than one
OS user from connecting and utilizing the LocalBackend at the same time. However, the same type of issues is also applicable to other
platforms when switching between profiles that have different OperatorUser values in ipn.Prefs.
We'd like to allow more than one Windows user to connect, but limit what they can see and do based on their access rights on the device
(e.g., an local admin or not) and to the currently active LoginProfile (e.g., owner/operator or not), while preventing TOCTOU issues on Windows
and other platforms. Therefore, we'd like to pass an actor from the LocalAPI to the LocalBackend to represent the user performing the operation.
The LocalBackend, or the profileManager down the line, will then check the actor's access rights to perform a given operation on the device
and against the current (and/or the target) profile.
This PR does not change the current permission model in any way, but it introduces the concept of an actor and includes some preparatory
work to pass it around. Temporarily, the ipnauth.Actor interface has methods like IsLocalSystem and IsLocalAdmin, which are only relevant
to the current permission model. It also lacks methods that will actually be used in the new model. We'll be adding these gradually in the next
PRs and removing the deprecated methods and the Permit* flags at the end of the transition.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
On a major link change the LAN routes may change, so on linkChange where
ChangeDelta.Major, we need to call authReconfig to ensure that new
routes are observed and applied.
Updates tailscale/corp#22574
Signed-off-by: James Tucker <james@tailscale.com>
This is the equivalent of quad-100, but for IPv6. This is technically
already contained in the Tailscale IPv6 ULA prefix, but that is only
installed when remote peers are visible via control with contained
addrs. The service addr should always be reachable.
Updates #1152
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And convert a few callers as an example, but nowhere near all.
Updates #12912
Change-Id: I5eaa12a29a6cd03b58d6f1072bd27bc0467852f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In Tailnet Lock, there is an implicit limit on the number of rotation
signatures that can be chained before the signature becomes too long.
This program helps tailnet admins to identify nodes that have signatures
with long chains and prints commands to re-sign those node keys with a
fresh direct signature. It's a temporary mitigation measure, and we will
remove this tool as we design and implement a long-term approach for
rotation signatures.
Example output:
```
2024/08/20 18:25:03 Self: does not need re-signing
2024/08/20 18:25:03 Visible peers with valid signatures:
2024/08/20 18:25:03 Peer xxx2.yy.ts.net. (100.77.192.34) nodeid=nyDmhiZiGA11KTM59, current signature kind=direct: does not need re-signing
2024/08/20 18:25:03 Peer xxx3.yy.ts.net. (100.84.248.22) nodeid=ndQ64mDnaB11KTM59, current signature kind=direct: does not need re-signing
2024/08/20 18:25:03 Peer xxx4.yy.ts.net. (100.85.253.53) nodeid=nmZfVygzkB21KTM59, current signature kind=rotation: chain length 4, printing command to re-sign
tailscale lock sign nodekey:530bddbfbe69e91fe15758a1d6ead5337aa6307e55ac92dafad3794f8b3fc661 tlpub:4bf07597336703395f2149dce88e7c50dd8694ab5bbde3d7c2a1c7b3e231a3c2
```
To support this, the NetworkLockStatus localapi response now includes
information about signatures of all peers rather than just the invalid
ones. This is not displayed by default in `tailscale lock status`, but
will be surfaced in `tailscale lock status --json`.
Updates #13185
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Updates tailscale/corp#22120
Adds the ability to start the backend by reading an authkey stored in the syspolicy database (MDM). This is useful for devices that are provisioned in an unattended fashion.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
* cmd/tsidp: add funnel support
Updates #10263.
Signed-off-by: Naman Sood <mail@nsood.in>
* look past funnel-ingress-node to see who we're authenticating
Signed-off-by: Naman Sood <mail@nsood.in>
* fix comment typo
Signed-off-by: Naman Sood <mail@nsood.in>
* address review feedback, support Basic auth for /token
Turns out you need to support Basic auth if you do client ID/secret
according to OAuth.
Signed-off-by: Naman Sood <mail@nsood.in>
* fix typos
Signed-off-by: Naman Sood <mail@nsood.in>
* review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* remove debugging log
Signed-off-by: Naman Sood <mail@nsood.in>
* add comments, fix header
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Fixestailscale/tailscale#12973
Updates tailscale/tailscale#1634
There was a logic issue in the captive detection code we shipped in https://github.com/tailscale/tailscale/pull/12707.
Assume a captive portal has been detected, and the user notified. Upon switching to another Wi-Fi that does *not* have a captive portal, we were issuing a signal to interrupt any pending captive detection attempt. However, we were not also setting the `captive-portal-detected` warnable to healthy. The result was that any "captive portal detected" alert would not be cleared from the UI.
Also fixes a broken log statement value.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
wgengine/magicsock,ipn: allow setting static node endpoints via tailscaled config file.
Adds a new StaticEndpoints field to tailscaled config
that can be used to statically configure the endpoints
that the node advertizes. This field will replace
TS_DEBUG_PRETENDPOINTS env var that can be used to achieve the same.
Additionally adds some functionality that ensures that endpoints
are updated when configfile is reloaded.
Also, refactor configuring/reconfiguring components to use the
same functionality when configfile is parsed the first time or
subsequent times (after reload). Previously a configfile reload
did not result in resetting of prefs. Now it does- but does not yet
tell the relevant components to consume the new prefs. This is to
be done in a follow-up.
Updates tailscale/tailscale#12578
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
If an optional `hwaddrs` URL parameter is present, add network interface
hardware addresses to the posture identity response.
Just like with serial numbers, this requires client opt-in via MDM or
`tailscale set --posture-checking=true`
(https://tailscale.com/kb/1326/device-identity)
Updates tailscale/corp#21371
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We added a workaround for --wait, but didn't confirm the other flags,
which were added in systemd 235 and 236. Check systemd version for
deciding when to set all 3 flags.
Fixes#12136
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
While `clientupdate.Updater` won't be able to apply updates on macsys,
we use `clientupdate.CanAutoUpdate` to gate the EditPrefs endpoint in
localAPI. We should allow the GUI client to set AutoUpdate.Apply on
macsys for it to properly get reported to the control plane. This also
allows the tailnet-wide default for auto-updates to propagate to macsys
clients.
Updates https://github.com/tailscale/corp/issues/21339
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Detection of duplicate Network Lock signature chains added in
01847e0123 failed to account for chains
originating with a SigCredential signature, which is used for wrapped
auth keys. This results in erroneous removal of signatures that
originate from the same re-usable auth key.
This change ensures that multiple nodes created by the same re-usable
auth key are not getting filtered out by the network lock.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change moves handling of wrapped auth keys to the `tka` package and
adds a test covering auth key originating signatures (SigCredential) in
netmap.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
When auto-udpates are enabled, we don't need to nag users to update
after a new release, before we release auto-updates.
Updates https://github.com/tailscale/corp/issues/20081
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The context can get canceled during backoff, and binding after that
makes the listener impossible to close afterwards.
Fixes#12620.
Signed-off-by: Naman Sood <mail@nsood.in>
We can observe a data race in tests when logging after a test is
finished. `b.onHealthChange` is called in a goroutine after being
registered with `health.Tracker.RegisterWatcher`, which calls callbacks
in `setUnhealthyLocked` in a new goroutine.
See: https://github.com/tailscale/tailscale/actions/runs/9672919302/job/26686038740
Updates #12054
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibf22cc994965d88a9e7236544878d5373f91229e
So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#20971
We added some Warnables for DERP failure situations, but their Text currently spits out the DERP region ID ("10") in the UI, which is super ugly. It would be better to provide the RegionName of the DERP region that is failing. We can do so by storing a reference to the last-known DERP map in the health package whenever we fetch one, and using it when generating the notification text.
This way, the following message...
> Tailscale could not connect to the relay server '10'. The server might be temporarily unavailable, or your Internet connection might be down.
becomes:
> Tailscale could not connect to the 'Seattle' relay server. The server might be temporarily unavailable, or your Internet connection might be down.
which is a lot more user-friendly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
