When running as non-root non-operator user, you get this error:
```
$ tailscale serve 8080
Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
It should fail, but the error message is confusing.
With this fix:
```
$ tailscale serve 8080
sending serve config: Access denied: serve config denied
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
expvarx.SafeFunc wraps an expvar.Func with a time limit. On reaching the
time limit, calls to Value return nil, and no new concurrent calls to
the underlying expvar.Func will be started until the call completes.
Updates tailscale/corp#16999
Signed-off-by: James Tucker <james@tailscale.com>
These are functionally the same as the "urn:schemas-upnp-org" services
with a few minor changes, and are still used by older devices. Support
them to improve our ability to obtain an external IP on such networks.
Updates #10911
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I05501fad9d6f0a3b8cf19fc95eee80e7d16cc2cf
Don't append a trailing slash to a request path
to the reverse proxy that matches the mount point exactly.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
If control advised the connector to advertise a route that had already
been discovered by DNS it would be incorrectly removed. Now those routes
are preserved.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
This change allows us to perform batch modification for new route
advertisements and route removals. Additionally, we now handle the case
where newly added routes are covered by existing ranges.
This change also introduces a new appctest package that contains some
shared functions used for testing.
Updates tailscale/corp#16833
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Do not provision resources for a tailscale Ingress that has no valid backends.
Updates tailscale/tailscale#10910
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This no longer results in a nil pointer exception when we get a valid
UPnP response with no supported clients.
Updates #10911
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6e3715a49a193ff5261013871ad7fff197a4d77e
The new 'toolchain' directive in go.mod can sometimes force
the use of an upstream toolchain against our wishes. Concurrently,
some of our dependencies have added the 'toolchain' directive, which
transitively adds it to our own go.mod. Force all uses of gocross to
ignore that directive and stick to our customized toolchain.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
We issue redirects in a few different places, it's time to have
a common helper to do target validation.
Updates tailscale/corp#16875
Signed-off-by: David Anderson <danderson@tailscale.com>
* VERSION.txt: this is v1.58.0
Signed-off-by: kari-ts <kari@tailscale.com>
* VERSION.txt: this is v1.59.0
---------
Signed-off-by: kari-ts <kari@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are
available at:
http://localhost:12345/debug/metrics
Updates #8210
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8
For use in corp, where we appear to have re-implemented this in a few
places with varying signatures.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id863a87e674f3caa87945519be8e09650e9c1d76
If there are routes changes as a side effect of an app connector
configuration update, the connector configuration may want to reenter a
lock, so must be started asynchronously.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
This is a useful primitive for asynchronous execution of ordered work I
want to use in another change.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Control can now send down a set of routes along with the domains, and
the routes will be advertised, with any newly overlapped routes being
removed to reduce the size of the routing table.
Fixestailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
To reduce the likelihood of breaking users,
if we implement stricter Exact path type matching in the future.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
The lack of type-safety in context.WithValue leads to the common pattern
of defining of package-scoped type to ensure global uniqueness:
type fooKey struct{}
func withFoo(ctx context, v Foo) context.Context {
return context.WithValue(ctx, fooKey{}, v)
}
func fooValue(ctx context) Foo {
v, _ := ctx.Value(fooKey{}).(Foo)
return v
}
where usage becomes:
ctx = withFoo(ctx, foo)
foo := fooValue(ctx)
With many different context keys, this can be quite tedious.
Using generics, we can simplify this as:
var fooKey = ctxkey.New("mypkg.fooKey", Foo{})
where usage becomes:
ctx = fooKey.WithValue(ctx, foo)
foo := fooKey.Value(ctx)
See https://go.dev/issue/49189
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
When establishing connections to the ipnserver, we validate that the
local user is allowed to connect. If Tailscale is currently being
managed by a different user (primarily for multi-user Windows installs),
we don't allow the connection.
With the new device web UI, the inbound connection is coming from
tailscaled itself, which is often running as "NT AUTHORITY\SYSTEM".
In this case, we still want to allow the connection, even though it
doesn't match the user running the Tailscale GUI. The SYSTEM user has
full access to everything on the system anyway, so this doesn't escalate
privileges.
Eventually, we want the device web UI to run outside of the tailscaled
process, at which point this exception would probably not be needed.
Updates tailscale/corp#16393
Signed-off-by: Will Norris <will@tailscale.com>
See the field alignment lints for more information.
Reductions are 64->24 and 64->32 respectively.
Updates #self
Signed-off-by: James Tucker <james@tailscale.com>
This change adds a description to the exit-node CLI command. This
description will be displayed when using `tailscale -h` and `tailscale
exit-node -h`.
Fixes#10787
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The manage client always listens on http (non-secure) port 5252. If the
login client is loaded over https, then the connectivity check to `/ok`
will fail with a mixed-content error. Mixed-content enforcement is a
browser setting that we have no control over, so there's no way around
this.
In this case of the login client being loaded over https, we skip the
connectivity check entirely. We will always render the sign-in button,
though we don't know for sure if the user has connectivity, so we
provide some additional help text in case they have trouble signing in.
Updates hassio-addons/addon-tailscale#314
Signed-off-by: Will Norris <will@tailscale.com>
Observed on one busy derp node, there were 600 goroutines blocked
writing to this channel, which represents not only more blocked routines
than we need, but also excess wake-ups downstream as the latent
goroutines writes represent no new work.
Updates #self
Signed-off-by: James Tucker <james@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: fix base truncating for extra long Service names
StatefulSet names for ingress/egress proxies are calculated
using Kubernetes name generator and the parent resource name
as a base.
The name generator also cuts the base, but has a higher max cap.
This commit fixes a bug where, if we get a shortened base back
from the generator, we cut off too little as the base that we
have cut will be passed into the generator again, which will
then itself cut less because the base is shorter- so we end up
with a too long name again.
Updates tailscale/tailscale#10807
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
