They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
Old macOS clients required we populate this field to a non-null
value so we were unable to remove this field before.
Instead, keep the field but change its type to a custom empty struct
that can marshal/unmarshal JSON. And lock it in with a test.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
control/controlclient: sign RegisterRequest
Some customers wish to verify eligibility for devices to join their
tailnets using machine identity certificates. TLS client certs could
potentially fulfill this role but the initial customer for this feature
has technical requirements that prevent their use. Instead, the
certificate is loaded from the Windows local machine certificate store
and uses its RSA public key to sign the RegisterRequest message.
There is room to improve the flexibility of this feature in future and
it is currently only tested on Windows (although Darwin theoretically
works too), but this offers a reasonable starting place for now.
Updates tailscale/coral#6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
In f45a9e291b (2021-03-04), I tried to bump CurrentMapRequestVersion
to 12 but only documented the meaning of 12 but forgot to actually
increase it from 11.
Mapver 11 was added in ea49b1e811 (2021-03-03).
Fix this in its own commit so we can cherry-pick it to the 1.6 release
branch.
So the control server can test whether a client's actually present.
Most clients are over HTTP/2, so these pings (to the same host) are
super cheap.
This mimics the earlier goroutine dump mechanism.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit da4ec54756.
Since v6 got disabled for Windows nodes, I need the debug flag back
to figure out why it was broken.
Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Consolidates the node display name logic from each of the clients into
tailcfg.Node. UI clients can use these names directly, rather than computing
them independently.
Previously the client had heuristics to calculate which DNS search domains
to set, based on the peers' names. Unfortunately that prevented us from
doing some things we wanted to do server-side related to node sharing.
So, bump MapRequest.Version to 9 to signal that the client only uses the
explicitly configured DNS search domains and doesn't augment it with its own
list.
Updates tailscale/corp#1026
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now, the server will only send v6 configuration to mapversion 8 clients
as part of an early-adopter program, while we verify that the functionality
is robust.
Signed-off-by: David Anderson <danderson@tailscale.com>
After mapver 5's incremental netmap updates & user profiles, much of
the remaining bandwidth for streamed MapResponses were redundant,
unchanged PacketFilters. So make MapRequest.Version 6 mean that nil
means unchanged from the previous value.
Noticed these in MapResponses to clients.
MachineAuthorized was set true, but once we fix the coordination server
to zero out that field, then it can be omittted.
The cloner tool adds static checks that the Clone methods are up to
date, so failing to update Clone causes a compiler error.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
These accidentally make the tag syntax more flexible than was intended,
which will create forward compatibility problems later. Let's go back
to the old stricter parser.
Revert "cmd/tailscale/cli: fix double tag: prefix in tailscale up"
Revert "cmd/tailscale/cli, tailcfg: allow tag without "tag:" prefix in 'tailscale up'"
This reverts commit a702921620.
This reverts commit cd07437ade.
Affects #861.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
In 1.0, subnet relays were not specially handled when WPAD+PAC was
present on the network.
In 1.2, on Windows, subnet relays were disabled if WPAD+PAC was
present. That was what some users wanted, but not others.
This makes it configurable per domain, reverting back to the 1.0
default state of them not being special. Users who want that behavior
can then enable it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also replaces the IPv6Overlay bool with use of DebugFlags, since
it's currently an experimental configuration.
Signed-off-by: David Anderson <danderson@tailscale.com>
I was going to make support for this advertised from the client, but
turns out only "tailscale status" even uses the UserProfiles field and
fails gracefully (omits that field) if a user profile for a user is
missing, so I think we can just reuse the DeltaPeers field from the
client to ask the control server to also delta encode the user
profiles.
For the few users running 1.1.x (unstable) versions between DeltaPeers
support (1.1.82) and this (~1.1.541), they'll just sometimes have
missing names in "tailscale status --json" or "tailscale status --web"
(the only places the UserProfile is used).
DebugForceDisco was a development & safety knob during the the transition
to discovery. It's no longer needed.
Add MapRequest.ReadOnly to prevent clients needing to do two
peer-spamming MapRequest at start-up.
This only adds the field, not the use of the field. (The control server
needs to support it first.)
Updates tailscale/corp#557
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If there's been 5 minutes of inactivity, stop doing STUN lookups. That
means NAT mappings will expire, but they can resume later when there's
activity again.
We'll do this for all platforms later.
Updates tailscale/corp#320
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.
And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)
This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.
Also fix some test flakes & races.
Fixes#387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes#399 (wgengine: flaky tests)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
These will be used for dynamically changing the identity of a node, so
its ACL rights can be different from your own.
Note: Not all implemented yet on the server side, but we need this so
we can request the tagged rights in the first place.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This depends on improved support from the control server, to send the
new subnet width (Bits) fields. If these are missing, we fall back to
assuming their value is /32.
Conversely, if the server sends Bits fields to an older client, it will
interpret them as /32 addresses. Since the only rules we allow are
"accept" rules, this will be narrower or equal to the intended rule, so
older clients will simply reject hosts on the wider subnet (fail
closed).
With this change, the internal filter.Matches format has diverged
from the wire format used by controlclient, so move the wire format
into tailcfg and convert it to filter.Matches in controlclient.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Breaks something deep in wireguard or magicsock's brainstem, no packets at all
can flow. All received packets fail decryption with "invalid mac1".
This reverts commit 94024355ed.
Signed-off-by: David Anderson <dave@natulte.net>
We still include them directly in the controlclient network map
just where we have been. Client plumbing we can do later.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
* adds new packet "netcheck" to do the checking of UDP, IPv6, and
nearest DERP server, and the Report type for all that (and more
in the future, probably pulling in danderson's natprobe)
* new tailcfg.NetInfo type
* cmd/tailscale netcheck subcommand (tentative name, likely to
change/move) to print out the netcheck.Report.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
