Rather than using a string everywhere and needing to clarify that the
string should have the svc: prefix, create a separate type for Service
names.
Updates tailscale/corp#24607
Change-Id: I720e022f61a7221644bb60955b72cacf42f59960
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This commit intend to provide support for TCP and Web VIP services and also allow user to use Tun
for VIP services if they want to.
The commit includes:
1.Setting TCP intercept function for VIP Services.
2.Update netstack to send packet written from WG to netStack handler for VIP service.
3.Return correct TCP hander for VIP services when netstack acceptTCP.
This commit also includes unit tests for if the local backend setServeConfig would set correct TCP intercept
function and test if a hander gets returned when getting TCPHandlerForDst. The shouldProcessInbound
check is not unit tested since the test result just depends on mocked functions. There should be an integration
test to cover shouldProcessInbound and if the returned TCP handler actually does what the serveConfig says.
Updates tailscale/corp#24604
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Adds a new Hostinfo.IngressEnabled bool field that holds whether
funnel is currently enabled for the node. Triggers control update
when this value changes.
Bumps capver so that control can distinguish the new field being false
vs non-existant in previous clients.
This is part of a fix for an issue where nodes with any AllowFunnel
block set in their serve config are being displayed as if actively
routing funnel traffic in the admin panel.
Updates tailscale/tailscale#11572
Updates tailscale/corp#25931
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This deprecates the old "DERP string" packing a DERP region ID into an
IP:port of 127.3.3.40:$REGION_ID and just uses an integer, like
PeerChange.DERPRegion does.
We still support servers sending the old form; they're converted to
the new form internally right when they're read off the network.
Updates #14636
Change-Id: I9427ec071f02a2c6d75ccb0fcbf0ecff9f19f26f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we add a generic views.ValuePointer type that can be used as a view for pointers
to basic types and struct types that do not require deep cloning and do not have corresponding
view types. Its Get/GetOk methods return stack-allocated shallow copies of the underlying value.
We then update the cmd/viewer codegen to produce getters that return either concrete views
when available or ValuePointer views when not, for pointer fields in generated view types.
This allows us to avoid unnecessary allocations compared to returning pointers to newly
allocated shallow copies.
Updates #14570
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit updates the return body of c2n endpoint /vip-services to keep hash generation logic on client side.
Updates tailscale/corp#24510
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
And misc cleanup along the way.
Updates #12912
Change-Id: I0cab148b49efc668c6f5cdf09c740b84a713e388
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* tailcfg: rename and retype ServiceHost capability, add value type
Updates tailscale/corp#22743.
In #14046, this was accidentally made a PeerCapability when it
should have been NodeCapability. Also, renaming it to use the
nomenclature that we decided on after #14046 went up, and adding
the type of the value that will be passed down in the RawMessage
for this capability.
This shouldn't break anything, since no one was using this string or
variable yet.
Signed-off-by: Naman Sood <mail@nsood.in>
When we first made Tailscale SSH, we assumed people would want public
key support soon after. Turns out that hasn't been the case; people
love the Tailscale identity authentication and check mode.
In light of CVE-2024-45337, just remove all our public key code to not
distract people, and to make the code smaller. We can always get it
back from git if needed.
Updates tailscale/corp#25131
Updates golang/go#70779
Co-authored-by: Percy Wegmann <percy@tailscale.com>
Change-Id: I87a6e79c2215158766a81942227a18b247333c22
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Initial support for SrcCaps was added in 5ec01bf but it was not actually
working without this.
Updates #12542
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
* ipn,tailcfg: add VIPService struct and c2n to fetch them from client
Updates tailscale/corp#22743, tailscale/corp#22955
Signed-off-by: Naman Sood <mail@nsood.in>
* more review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* don't mention PeerCapabilityServicesDestination since it's currently unused
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Make it possible to advertise app connector via a new conffile field.
Also bumps capver - conffile deserialization errors out if unknonw
fields are set, so we need to know which clients understand the new field.
Updates tailscale/tailscale#11113
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Our existing container-detection tricks did not work on Kubernetes,
where Docker is no longer used as a container runtime. Extends the
existing go build tags for containers to the other container packages
and uses that to reliably detect builds that were created by Tailscale
for use in a container. Unfortunately this doesn't necessarily improve
detection for users' custom builds, but that's a separate issue.
Updates #13825
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add an `AcceptEnv` field to `SSHRule`. This will contain the collection
of environment variable names / patterns that are specified in the
`acceptEnv` block for the SSH rule within the policy file. This will be
used in the tailscale client to filter out unacceptable environment
variables.
Updates: https://github.com/tailscale/corp/issues/22775
Signed-off-by: Mario Minardi <mario@tailscale.com>
I should've bumped capver in 65fe0ba7b5 but forgot.
This lets us turn off the cryptokey routing change from control for
the affected panicky range of commits, based on capver.
Updates #13332
Updates tailscale/corp#20732
Change-Id: I32c17cfcb45b2369b2b560032330551d47a0ce0b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This involved the following:
1. Pass the su command path as first of args in call to unix.Exec to make sure that busybox sees the correct program name.
Busybox is a single executable userspace that implements various core userspace commands in a single binary. You'll
see it used via symlinking, so that for example /bin/su symlinks to /bin/busybox. Busybox knows that you're trying
to execute /bin/su because argv[0] is '/bin/su'. When we called unix.Exec, we weren't including the program name for
argv[0], which caused busybox to fail with 'applet not found', meaning that it didn't know which command it was
supposed to run.
2. Tell su to whitelist the SSH_AUTH_SOCK environment variable in order to support ssh agent forwarding.
3. Run integration tests on alpine, which uses busybox.
4. Increment CurrentCapabilityVersion to allow turning on SSH V2 behavior from control.
Fixes#12849
Signed-off-by: Percy Wegmann <percy@tailscale.com>
We were copying 12 out of the 16 bytes which meant that
the 1:1 NAT required would only work if the last 4 bytes
happened to match between the new and old address, something
that our tests accidentally had. Fix it by copying the full
16 bytes and make the tests also verify the addr and use rand
addresses.
Updates #9511
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
If we get an non-disco presumably-wireguard-encrypted UDP packet from
an IP:port we don't recognize, rather than drop the packet, give it to
WireGuard anyway and let WireGuard try to figure out who it's from and
tell us.
This uses the new hook added in https://github.com/tailscale/wireguard-go/pull/27
Updates tailscale/corp#20732
Change-Id: I5c61a40143810592f9efac6c12808a87f924ecf2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If an optional `hwaddrs` URL parameter is present, add network interface
hardware addresses to the posture identity response.
Just like with serial numbers, this requires client opt-in via MDM or
`tailscale set --posture-checking=true`
(https://tailscale.com/kb/1326/device-identity)
Updates tailscale/corp#21371
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
For testing. Lee wants to play with 'AWS Global Accelerator Custom
Routing with Amazon Elastic Kubernetes Service'. If this works well
enough, we can promote it.
Updates #12578
Change-Id: I5018347ed46c15c9709910717d27305d0aedf8f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The DERP Return Path Optimization (DRPO) is over four years old (and
on by default for over two) and we haven't had problems, so time to
remove the emergency shutoff code (controlknob) which we've never
used. The controlknobs are only meant for new features, to mitigate
risk. But we don't want to keep them forever, as they kinda pollute
the code.
Updates #150
Change-Id: If021bc8fd1b51006d8bddd1ffab639bb1abb0ad1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers
associated with all network adapters, even when "Override local DNS" is enabled and/or
a Mullvad exit node is being used, resulting in DNS leaks.
This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable
the new behavior if needed.
Fixestailscale/corp#20718
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Fixestailscale/corp#18366.
This PR provides serial number collection on iOS, by allowing system administrators to pass a `DeviceSerialNumber` MDM key which can be read by the `posture` package in Go.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
We do not intend to use this value for feature support communication in
the future, and have applied changes elsewhere that now fix the expected
value.
Updates tailscale/corp#19391
Updates tailscale/corp#20398
Signed-off-by: James Tucker <james@tailscale.com>
Add an additional RecorderAddrs field to tailscale.com/cap/kubernetes
capability. RecorderAddrs will only be populated by control
with the addresses of any tsrecorder tags set via Recorder.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR is in prep of adding logic to control to be able to parse
tailscale.com/cap/kubernetes grants in control:
- moves the type definition of PeerCapabilityKubernetes cap to a location
shared with control.
- update the Kubernetes cap rule definition with fields for granting
kubectl exec session recording capabilities.
- adds a convenience function to produce tailcfg.RawMessage from an
arbitrary cap rule and a test for it.
An example grant defined via ACLs:
"grants": [{
"src": ["tag:eng"],
"dst": ["tag:k8s-operator"],
"app": {
"tailscale.com/cap/kubernetes": [{
"recorder": ["tag:my-recorder"]
“enforceRecorder”: true
}],
},
}
]
This grant enforces `kubectl exec` sessions from tailnet clients,
matching `tag:eng` via API server proxy matching `tag:k8s-operator`
to be recorded and recording to be sent to a tsrecorder instance,
matching `tag:my-recorder`.
The type needs to be shared with control because we want
control to parse this cap and resolve tags to peer IPs.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates corp#15802.
Adds the ability for control to disable the recently added change that uses split DNS in more cases on iOS. This will allow us to disable the feature if it leads to regression in production. We plan to remove this knob once we've verified that the feature works properly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This is done in preparation for adding kubectl
session recording rules to this capability grant that will need to
be unmarshalled by control, so will also need to be
in a shared location.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
