Commit Graph

987 Commits

Author SHA1 Message Date
Brad Fitzpatrick
36a26e6a71 internal/deephash: rename from deepprint
Yes, it printed, but that was an implementation detail for hashing.

And coming optimization will make it print even less.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-11 12:11:16 -07:00
Brad Fitzpatrick
e72ed3fcc2 ipn/{ipnlocal,ipnstate}: add PeerStatus.ID stable ID to status --json output
Needed for the "up checker" to map back from exit node stable IDs (the
ipn.Prefs.ExitNodeID) back to an IP address in error messages.

But also previously requested so people can use it to then make API
calls. The upcoming "tailscale admin" subcommand will probably need it
too.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-07 09:31:55 -07:00
Josh Bleecher Snyder
78d4c561b5 types/logger: add key grinder stats lines to rate-limiting exemption list
Updates #1749

Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-05 08:25:15 -07:00
Avery Pennarun
6d10655dc3 ipnlocal: accept a new opts.UpdatePrefs field.
This is needed because the original opts.Prefs field was at some point
subverted for use in frontend->backend state migration for backward
compatibility on some platforms. We still need that feature, but we
also need the feature of providing the full set of prefs from
`tailscale up`, *not* including overwriting the prefs.Persist keys, so
we can't use the original field from `tailscale up`.

`tailscale up` had attempted to compensate for that by doing SetPrefs()
before Start(), but that violates the ipn.Backend contract, which says
you should call Start() before anything else (that's why it's called
Start()). As a result, doing SetPrefs({ControlURL=...,
WantRunning=true}) would cause a connection to the *previous* control
server (because WantRunning=true), and then connect to the *new*
control server only after running Start().

This problem may have been avoided before, but only by pure luck.

It turned out to be relatively harmless since the connection to the old
control server was immediately closed and replaced anyway, but it
created a race condition that could have caused spurious notifications
or rejected keys if the server responded quickly.

As already covered by existing TODOs, a better fix would be to have
Start() get out of the business of state migration altogether. But
we're approaching a release so I want to make the minimum possible fix.

Fixes #1840.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-05-04 15:19:25 -04:00
Brad Fitzpatrick
4066c606df ipn/ipnlocal: update peerapi logging of received PUTs
Clarify direction and add duration.

(per chat with Avery)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-04 11:09:02 -07:00
Brad Fitzpatrick
f5bccc0746 ipn/ipnlocal: redact more errors
Updates tailscale/corp#1636

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-04 09:58:09 -07:00
Josh Bleecher Snyder
96ef8d34ef ipn/ipnlocal: switch from testify to quicktest
Per discussion, we want to have only one test assertion library,
and we want to start by exploring quicktest.

This was a mostly mechanical translation.
I think we could make this nicer by defining a few helper
closures at the beginning of the test. Later.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-05-03 10:09:13 -07:00
Brad Fitzpatrick
544d8d0ab8 ipn/ipnlocal: remove NewLocalBackendWithClientGen
This removes the NewLocalBackendWithClientGen constructor added in
b4d04a065f and instead adds
LocalBackend.SetControlClientGetterForTesting, mirroring
LocalBackend.SetHTTPTestClient. NewLocalBackendWithClientGen was
weird in being exported but taking an unexported type. This was noted
during code review:

https://github.com/tailscale/tailscale/pull/1818#discussion_r623155669

which ended in:

"I'll leave it for y'all to clean up if you find some way to do it elegantly."

This is more idiomatic.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-30 07:36:53 -07:00
Avery Pennarun
0181a4d0ac ipnlocal: don't pause the controlclient until we get at least one netmap.
Without this, macOS would fail to display its menu state correctly if you
started it while !WantRunning. It relies on the netmap in order to show
the logged-in username.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 09:18:13 -04:00
Avery Pennarun
4ef207833b ipn: !WantRunning + !LoggedOut should not be idle on startup.
There was logic that would make a "down" tailscale backend (ie.
!WantRunning) refuse to do any network activity. Unfortunately, this
makes the macOS and iOS UI unable to render correctly if they start
while !WantRunning.

Now that we have Prefs.LoggedOut, use that instead. So `tailscale down`
will still allow the controlclient to connect its authroutine, but
pause the maproutine. `tailscale logout` will entirely stop all
activity.

This new behaviour is not obviously correct; it's a bit annoying that
`tailsale down` doesn't terminate all activity like you might expect.
Maybe we should redesign the UI code to render differently when
disconnected, and then revert this change.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 09:18:13 -04:00
Avery Pennarun
4f3315f3da ipnlocal: setting WantRunning with EditPrefs was special.
EditPrefs should be just a wrapper around the action of changing prefs,
but someone had added a side effect of calling Login() sometimes. The
side effect happened *after* running the state machine, which would
sometimes result in us going into NeedsLogin immediately before calling
cc.Login().

This manifested as the macOS app not being able to Connect if you
launched it with LoggedOut=false and WantRunning=false. Trying to
Connect() would sent us to the NeedsLogin state instead.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 09:18:13 -04:00
Avery Pennarun
2a4d1cf9e2 Add prefs.LoggedOut to fix several state machine bugs.
Fixes: tailscale/corp#1660

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 09:18:13 -04:00
Avery Pennarun
b0382ca167 ipn/ipnlocal: some state_test cleanups.
This doesn't change the actual functionality. Just some additional
comments and fine tuning.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 09:18:12 -04:00
Avery Pennarun
ac9cd48c80 ipnlocal: fix deadlock when calling Shutdown() from Start().
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 09:17:47 -04:00
Avery Pennarun
ecdba913d0 Revert "ipn/ipnlocal: be authoritative for the entire MagicDNS record tree."
Unfortunately this broke MagicDNS almost entirely.

Updates: tailscale/corp#1706

This reverts commit 1d7e7b49eb.
2021-04-30 06:16:58 -04:00
Avery Pennarun
b7e31ab1a4 ipn: mock controlclient.Client; big ipn.Backend state machine test.
A very long unit test that verifies the way the controlclient and
ipn.Backend interact.

This is a giant sequential test of the state machine. The test passes,
but only because it's asserting all the wrong behaviour. I marked all
the behaviour I think is wrong with BUG comments, and several
additional test opportunities with TODO.

Note: the new test supercedes TestStartsInNeedsLoginState, which was
checking for incorrect behaviour (although the new test still checks
for the same incorrect behaviour) and assumed .Start() would converge
before returning, which it happens to do, but only for this very
specific case, for the current implementation. You're supposed to wait
for the notifications.

Updates: tailscale/corp#1660

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 00:09:35 -04:00
Avery Pennarun
b4d04a065f controlclient: extract a Client interface and rename Client->Auto.
This will let us create a mock or fake Client implementation for use
with ipn.Backend.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 00:09:35 -04:00
David Anderson
1d7e7b49eb ipn/ipnlocal: be authoritative for the entire MagicDNS record tree.
With this change, shared node names resolve correctly on split DNS-supporting
operating systems.

Fixes tailscale/corp#1706

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-29 16:06:01 -07:00
Brad Fitzpatrick
b7a497a30b ipn/ipnlocal: make FileTargets check IPN state first
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-29 10:26:53 -07:00
Brad Fitzpatrick
4bf6939ee0 ipn/ipnlocal: remove t.Parallel from recently added test
The test modifies a global; it shouldn't be parallel.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-28 11:02:56 -07:00
Brad Fitzpatrick
a48c8991f1 ipn/ipnlocal: add a test for earlier lazy machine key generation change
Updates #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-28 08:52:04 -07:00
David Anderson
306a094d4b ipn/ipnlocal: remove IPv6 records from MagicDNS.
Fixes #1813.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-28 01:01:56 -07:00
Brad Fitzpatrick
3bdc9e9cb2 ipn/ipnlocal: prevent a now-expected [unexpected] log message on Windows
Updates #1620

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-27 09:58:05 -07:00
Brad Fitzpatrick
138921ae40 ipn/ipnlocal: always write files to partial files, even in buffered mode
The intention was always that files only get written to *.partial
files and renamed at the end once fully received, but somewhere in the
process that got lost in buffered mode and *.partial files were only
being used in direct receive mode. This fix prevents WaitingFiles
from returning files that are still being transferred.

Updates tailscale/corp#1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-26 11:34:05 -07:00
Brad Fitzpatrick
5e268e6153 ipn/ipnlocal: use delete marker files to work around Windows delete problems
If DeleteFile fails on Windows due to another process (anti-virus,
probably) having our file open, instead leave a marker file that the
file is logically deleted, and remove it from API calls and clean it
up lazily later.

Updates tailscale/corp#1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-26 10:59:25 -07:00
Aleksandar Pesic
7c985e4944 ipn/ipnlocal: add file sharing to windows shell
Updates: tailscale/winmin#33

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-04-23 13:32:33 -07:00
Brad Fitzpatrick
fe53a714bd ipn/ipnlocal: add a LocalBackend.Start fast path if already running
Updates tailscale/corp#1621

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-23 12:14:12 -07:00
Brad Fitzpatrick
ad1a595a75 ipn/ipnlocal: close peer API listeners on transition away from Running
Updates tailscale/corp#1621

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-23 12:13:50 -07:00
David Anderson
36d030cc36 ipn/ipnlocal: use fallback default DNS whenever exit nodes are on.
Fixes #1625

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-22 15:24:18 -07:00
Brad Fitzpatrick
86e85d8934 ipn/ipnlocal: add peerapi goroutine fetch
Between owners.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-22 13:11:51 -07:00
Brad Fitzpatrick
2d786821f6 ipn/ipnlocal: put a retry loop around Windows file deletes
oh, Windows.

Updates tailscale/corp#1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-22 10:04:50 -07:00
Brad Fitzpatrick
529ef98b2a ipn/ipnlocal: fix approxSize operator precedence
Whoops.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-22 08:44:50 -07:00
Brad Fitzpatrick
b03c23d2ed ipn/ipnlocal: log on DeleteFile error
Updates tailscale/corp#1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-22 07:48:18 -07:00
Brad Fitzpatrick
2f17a34242 ipn/ipnlocal: fix tailscale status --json AuthURL field
It was getting cleared on notify.

Document that authURL is cleared on notify and add a new field that
isn't, using the new field for the JSON status.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-21 13:42:26 -07:00
Brad Fitzpatrick
09891b9868 ipn/ipnlocal: on fresh lazy-connecting install, start in state NeedsLogin
Fixes #1759

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-21 13:25:31 -07:00
David Anderson
6fd9e28bd0 ipn/ipnlocal: add arpa suffixes to MagicDNS for reverse lookups.
This used to not be necessary, because MagicDNS always did full proxying.
But with split DNS, we need to know which names to route to our resolver,
otherwise reverse lookups break.

This captures the entire CGNAT range, as well as our Tailscale ULA.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 18:05:17 -07:00
David Anderson
48d4f14652 ipn/ipnlocal: only set authoritative domains when using MagicDNS.
Otherwise, the existence of authoritative domains forces full
DNS proxying even when no other DNS config is present.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 15:52:19 -07:00
Brad Fitzpatrick
f99e63bb17 ipn: don't Logout when Windows GUI disconnects
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.

Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".

Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 13:14:10 -07:00
David Anderson
1e5c608fae ipn/ipnlocal: plumb fallback DNS in as a workaround for split DNS issues.
Cause of #1743.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 12:49:48 -07:00
Brad Fitzpatrick
3d0599fca0 ipn{,/ipnlocal}: in direct file receive mode, don't rename partial file
Let caller (macOS) do it so Finder progress bar can be dismissed
without races.

Updates tailscale/corp#1575

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 12:40:42 -07:00
Brad Fitzpatrick
a58fbb4da9 ipn/ipnlocal: only fix peerapiListener on Windows when running
It's just logspam otherwise.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 09:18:33 -07:00
Maisem Ali
36fa29feec ipn/ipnlocal: restrict local lan access to linux machines.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-20 08:11:06 -07:00
Brad Fitzpatrick
8570f82c8b ipn/ipnlocal: finish/fix up filename validation & encoding on disk
It used to just store received files URL-escaped on disk, but that was
a half done lazy implementation, and pushed the burden to callers to
validate and write things to disk in an unescaped way.

Instead, do all the validation in the receive handler and only
accept filenames that are UTF-8 and in the intersection of valid
names that all platforms support.

Fixes tailscale/corp#1594

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 22:39:53 -07:00
Brad Fitzpatrick
cad8df500c ipn/ipnlocal: add some more peerapi handlePeerPut tests
Updates tailscale/corp#1594

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 21:01:04 -07:00
Brad Fitzpatrick
0d1550898e ipn/ipnlocal: add some peerapi tests
Updates tailscale/corp#1594

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 20:28:53 -07:00
Brad Fitzpatrick
8f3e453356 ipn, cmd/tailscale/cli: add pref to configure sudo-free operator user
From discussion with @danderson.

Fixes #1684 (in a different way)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 10:12:41 -07:00
Brad Fitzpatrick
49808ae6ea ipn{,/ipnlocal}, cmd/tailscale/cli: don't check pref reverts on initial up
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_.  That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.

An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.

So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.

Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".

Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.

And update/add tests.

Fixes #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 08:12:18 -07:00
Brad Fitzpatrick
b993d9802a ipn/ipnlocal, etc: require file sharing capability to send/recv files
tailscale/corp#1582

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 10:58:19 -07:00
Brad Fitzpatrick
d6a95d807a ipn/ipnlocal: advertise netstack to control server
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 09:38:33 -07:00
Brad Fitzpatrick
762180595d ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 08:12:31 -07:00
Brad Fitzpatrick
34d2f5a3d9 tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).

Use []tailcfg.Endpoint instead of []string internally.

At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.

End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)

Updates tailscale/corp#1543

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 10:12:14 -07:00
Brad Fitzpatrick
b91f3c4191 ipn/ipnlocal: fix peerapi printf arg mismatch
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:56:26 -07:00
Brad Fitzpatrick
db5e269463 client/tailscale/apitype: move local API types to new apitype package
They were scattered/duplicated in misc places before.

It can't be in the client package itself for circular dep reasons.

This new package is basically tailcfg but for localhost
communications, instead of to control.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:13:46 -07:00
Maisem Ali
1b9d8771dc ipn/ipnlocal,wgengine/router,cmd/tailscale: add flag to allow local lan access when routing traffic via an exit node.
For #1527

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-12 17:29:01 -07:00
Brad Fitzpatrick
8e75c8504c ipn/ipnlocal: in direct file mode, don't readdir
And don't even allow attempts at Open/Delete.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 15:12:47 -07:00
Brad Fitzpatrick
9972c02b60 cmd/tailscale/cli: don't let up change prefs based on implicit flag values
This changes the behavior of "tailscale up".

Previously "tailscale up" always did a new Start and reset all the settings.

Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").

But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.

RELNOTE=tailscale up change

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 14:39:47 -07:00
Brad Fitzpatrick
f5742b0647 ipn/ipnlocal: add LocalBackend.SetDirectFileRoot
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 14:29:45 -07:00
Brad Fitzpatrick
4c3f7c06fc ipn/ipnlocal: be consistent in not logging when no notify registered
Some paths already didn't. And in the future I hope to shut all the
notify funcs down end-to-end when nothing is connected (as in the
common case in tailscaled).  Then we can save some JSON encoding work.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
7c0e58c537 ipn/ipnlocal: remove redundant notify nil check
send does it.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
00d641d9fc ipn/localapi: move EditPrefs to localapi
Follow-up/revision to recent 53cfff109b which
added EditPrefs.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 16:11:43 -07:00
David Anderson
1a371b93be util/dnsname: add FQDN type, use throughout codebase.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 17:58:13 -07:00
Brad Fitzpatrick
3167e55ddf ipn/{ipnlocal,localapi}, cmd/tailscale: add logout command
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 13:26:35 -07:00
Brad Fitzpatrick
11127666b2 ipn/ipnlocal: fix deadlock from 227f73284
Sigh.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 13:23:34 -07:00
Brad Fitzpatrick
227f73284f ipn/ipnlocal: eagerly announce peerapi service(s) on change
We were previously only doing it as a side effect of the port poller,
which doesn't run on e.g. iOS.

Updates tailscale/corp#1559
2021-04-09 12:10:52 -07:00
Brad Fitzpatrick
fe23506471 ipn/ipnlocal: avoid unneeded initPeerAPIListener work if no changes
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 11:13:46 -07:00
Brad Fitzpatrick
20e7646b8d ipn/ipnlocal: always set Notify.FilesWaiting, set IncomingFiles non-nil when empty 2021-04-09 07:59:36 -07:00
Brad Fitzpatrick
6d01d3bece ipn/ipnlocal: provide IPN bus updates as files arrive
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 20:09:52 -07:00
David Anderson
2f398106e2 ipn/ipnlocal: allow setting MagicDNS without DefaultResolvers.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 16:23:33 -07:00
David Anderson
fad21af01c tailcfg: add DNS routes and advanced resolver config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 15:29:08 -07:00
Brad Fitzpatrick
a9a3d3b4c1 ipn/ipnlocal: don't filter by time in FileTargets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 14:02:07 -07:00
Brad Fitzpatrick
71432c6449 ipn/ipnlocal: some more variable renames
Missed in earlier commit.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 21:17:33 -07:00
Brad Fitzpatrick
e86b7752ef ipn/ipnlocal: rename some variables to be consistent
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 21:12:28 -07:00
David Anderson
da4cc8bbb4 net/dns: handle all possible translations of high-level DNS config.
With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.

Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
Brad Fitzpatrick
939861773d net/tstun: accept peerapi connections through the filter
Fixes tailscale/corp#1545

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 12:29:20 -07:00
Brad Fitzpatrick
950fc28887 ipn, paths, cmd/tailscaled: remove LegacyConfigPath, relaynode migration
It is time.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 10:15:45 -07:00
Brad Fitzpatrick
d581ee2536 ipn: remove Options.HTTPTestClient, move to LocalBackend
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 09:20:51 -07:00
Brad Fitzpatrick
50b309c1eb ipn/localapi, cmd/tailscale: add API to get prefs, CLI debug command to show
Updates #1436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 08:28:11 -07:00
Brad Fitzpatrick
799973a68d ipn: move Options.Notify to its own method
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.

Baby steps towards some CLI refactor work.

Updates tailscale/tailscale#1436
2021-04-06 22:12:40 -07:00
Brad Fitzpatrick
d488678fdc cmd/tailscaled, wgengine{,/netstack}: add netstack hybrid mode, add to Windows
For #707

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 21:37:28 -07:00
Brad Fitzpatrick
1f99f889e1 ipn/{ipnlocal,localapi}: add localapi handler to dial/proxy file PUTs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 21:31:50 -07:00
Brad Fitzpatrick
d717499ac4 ipn/localapi: add API for getting file targets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 11:01:30 -07:00
David Anderson
f89dc1c903 ipn/ipnlocal: don't install any magicdns names if not proxying.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 14:24:47 -07:00
Brad Fitzpatrick
9b57cd53ba ipn/ipnlocal: lazily connect to control, lazily generate machine key
Fixes #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-02 08:21:40 -07:00
Brad Fitzpatrick
d50406f185 ipn/ipnlocal: simplify loadStateLocked control flow a bit, restore logging
The common Linux start-up path (fallback file defined but not
existing) was missing the log print of initializing Prefs. The code
was too twisty. Simplify a bit.

Updates #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-02 07:56:07 -07:00
David Anderson
6ad44f9fdf wgengine: take in dns.Config, split out to resolver.Config and dns.OSConfig.
Stepping stone towards having the DNS package handle the config splitting.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 00:59:44 -07:00
David Anderson
8af9d770cf net/dns: rename Config to OSConfig.
Making way for a new higher level config struct.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 00:59:44 -07:00
David Anderson
cf361bb9b1 net/dns: remove PerDomain from Config.
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 22:55:44 -07:00
Brad Fitzpatrick
6266cf8e36 ipn/ipnlocal: fix peerapi6 port being report as 0 in netstack mode
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 22:04:46 -07:00
David Anderson
90f82b6946 net/dns/resolver: add live reconfig, plumb through to ipnlocal.
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.

As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 01:44:03 -07:00
David Anderson
d99f5b1596 net/dns/resolver: factor the resolver out into a sub-package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:30 -07:00
Brad Fitzpatrick
53cfff109b ipn: replace SetWantRunning(bool) with EditPrefs(MaskedPrefs)
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.

Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.

Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).

Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.

In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".

Updates #1436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 22:14:11 -07:00
Brad Fitzpatrick
4ed6b62c7a ipn/ipnlocal: refactor to unindent a bit
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 16:03:23 -07:00
Brad Fitzpatrick
1f583a895e ipn/ipnlocal: stop sending machine key to frontends
We were going to remove this in Tailscale 1.3 but forgot.

This means Tailscale 1.8 users won't be able to downgrade to Tailscale
1.0, but that's fine.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 15:51:51 -07:00
Brad Fitzpatrick
c3bee0b722 ipn/ipnlocal: make peerapi work on iOS again
It didn't have a storage directory.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 14:09:06 -07:00
Brad Fitzpatrick
1bd14a072c cmd/tailscale, ipn/localapi: move IP forwarding check to tailscaled, API
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.

Fixes #1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 12:09:16 -07:00
Brad Fitzpatrick
a998fe7c3d control/controlclient: support lazy machine key generation
It's not done in the caller yet, but the controlclient does it now.

Updates #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 08:52:57 -07:00
Brad Fitzpatrick
cf2beafbcd ipn/ipnlocal: on Windows peerapi bind failures, try again on link change
Updates #1620

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 13:49:37 -07:00
Brad Fitzpatrick
6d1a9017c9 ipn/{ipnlocal,localapi}, client/tailscale: add file get/delete APIs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 12:56:51 -07:00
Brad Fitzpatrick
672b9fd4bd ipn{,/ipnlocal}: set new Notify.FilesWaiting when server has file(s)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 11:36:12 -07:00
Brad Fitzpatrick
f01091babe ipn/ipnlocal: make peerapi work in netstack mode
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 09:55:01 -07:00
Brad Fitzpatrick
41e4e02e57 net/{packet,tstun}: send peerapi port in TSMP pongs
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 15:18:23 -07:00
Brad Fitzpatrick
9659ab81e0 ipn/ipnlocal: send peerapi port(s) in Hostinfo.Services
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 12:51:19 -07:00
Brad Fitzpatrick
35596ae5ce ipn/ipnlocal: push down a user-specific root dir to peerapi handler
And add a put handler.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 11:33:35 -07:00
Brad Fitzpatrick
f26dfd054a ipn/ipnlocal: rename/document peerapi stuff a bit, pass self identity
So handlers can vary based on whether owner of peer matches owner of
local node.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 21:36:39 -07:00
Brad Fitzpatrick
1642dfdb07 ipn/ipnlocal: get peerapi ~working in macOS/iOS NetworkExtension sandbox
IPv4 and IPv6 both work remotely, but IPv6 doesn't yet work from the
machine itself due to routing mysteries.

Untested yet on iOS, but previous prototype worked on iOS, so should
work the same.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 13:46:01 -07:00
Brad Fitzpatrick
5a62aa8047 ipn/ipnlocal: pass down interface state to peerapi ListenConfig hook
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 09:11:48 -07:00
David Anderson
9f7f2af008 wgengine/router/dns: move to net/dns.
Preparation for merging the APIs and whatnot.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-25 16:25:30 -07:00
David Anderson
8432999835 Move wgengine/tsdns to net/dns.
Straight move+fixup, no other changes. In prep for merging with
wgengine/router/dns.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-25 16:25:30 -07:00
Brad Fitzpatrick
81143b6d9a ipn/ipnlocal: start of peerapi between nodes
Also some necessary refactoring of the ipn/ipnstate too.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-25 16:00:35 -07:00
Brad Fitzpatrick
2384c112c9 net/packet, wgengine/{filter,tstun}: add TSMP ping
Fixes #1467

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-24 09:50:01 -07:00
David Anderson
8c0a0450d9 ipn/ipnlocal: allow client access to exit node's public IPs.
"public IP" is defined as an IP address configured on the exit node
itself that isn't in the list of forbidden ranges (RFC1918, CGNAT,
Tailscale).

Fixes #1522.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-19 11:54:15 -07:00
Brad Fitzpatrick
0a02aaf813 control, ipn, tailcfg: remove golang.org/x/oauth2 dep, add tailcfg.Oauth2Token
golang.org/x/oauth2 pulls in App Engine and grpc module dependencies,
screwing up builds that depend on this module.

Some background on the problem:
https://go.googlesource.com/proposal/+/master/design/36460-lazy-module-loading.md

Fixes tailscale/corp#1471

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-19 10:40:48 -07:00
Brad Fitzpatrick
439d70dce2 cmd/tailscale, ipn/localapi: get daemon version from localapi status
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 21:14:10 -07:00
Brad Fitzpatrick
d0dffe33c0 cmd/tailscale, ipn/localapi: use localapi for status, not IPN acrobatics
Yay simpler code.

Tested on Linux, macOS and Windows.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 19:51:02 -07:00
Brad Fitzpatrick
27c4dd9a97 Revert "cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend"
This reverts commit 2bc518dcb2.

@namansood didn't end up needing it in his 770aa71ffb.
2021-03-16 12:33:13 -07:00
Brad Fitzpatrick
9eb65601ef health, ipn/ipnlocal: track, log overall health
Updates #1505

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-16 09:12:39 -07:00
Brad Fitzpatrick
ba8c6d0775 health, controlclient, ipn, magicsock: tell health package state of things
Not yet checking anything. Just plumbing states into the health package.

Updates #1505

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 15:20:55 -07:00
Naman Sood
770aa71ffb client, cmd/hello, ipn, wgengine: fix whois for netstack-forwarded connections
Updates #504

Updates #707

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-15 18:14:09 -04:00
Brad Fitzpatrick
2bc518dcb2 cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 09:31:25 -07:00
David Crawshaw
bdb91a20eb ipnstate, ipnlocal: add AuthURL to status
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-12 08:07:20 -08:00
David Anderson
d79a2f3809 wgengine/filter: only log packets to/from non-default routes.
Fixes tailscale/corp#1429.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-09 16:24:09 -08:00
Brad Fitzpatrick
affd859121 ipn/ipnlocal, control/controlclient: propagate link monitor to controlclient
Don't use it yet, but get it down there.

Updates #1455

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-04 20:11:55 -08:00
Brad Fitzpatrick
82edf94df7 ipn/ipnlocal: make IPv6 OS routes be a single /48 for our ULA space
And if we have over 10,000 CGNAT routes, just route the entire
CGNAT range. (for the hello test server)

Fixes #1450

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-04 13:37:05 -08:00
Brad Fitzpatrick
625c413508 ipn/ipnlocal: fix another regression from link monitoring refactor
Prior to e3df29d488, the Engine.SetLinkChangeCallback fired
immediately, even if there was no change. The ipnlocal code apparently
depended on that, and it broke integration tests (which live in
another repo). So mimic the old behavior and call the ipnlocal
callback immediately at init.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 20:45:30 -08:00
David Anderson
f647e3daaf ipn/ipnlocal: transform default routes into "all but LAN" routes.
Fixes #1177.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-01 18:47:43 -08:00
Brad Fitzpatrick
e3df29d488 wgengine{,/monitor}: move interface state fetching/comparing to monitor
Gets it out of wgengine so the Engine isn't responsible for being a
callback registration hub for it.

This also removes the Engine.LinkChange method, as it's no longer
necessary.  The monitor tells us about changes; it doesn't seem to
need any help. (Currently it was only used by Swift, but as of
14dc790137 we just do the same from Go)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 13:01:08 -08:00
Brad Fitzpatrick
38dc6fe758 cmd/tailscaled, wgengine: remove --fake, replace with netstack
And add a --socks5-server flag.

And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.

Co-authored with Naman Sood.

Updates #707
Updates #504

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 11:09:19 -08:00
David Anderson
8ee1cb6156 ipn/ipnlocal: mark findExitNodeID as requiring mutex.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 21:18:33 -08:00
David Anderson
2404c0ffad ipn/ipnlocal: only filter out default routes when computing the local wg config.
UIs need to see the full unedited netmap in order to know what exit nodes they
can offer to the user.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 20:41:56 -08:00
David Anderson
b83c273737 wgengine/filter: use IPSet for localNets instead of prefixes.
Part of #1177, preparing for doing fancier set operations on
the allowed local nets.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-22 14:51:22 -08:00
David Anderson
e86b39b73f ipn/ipnlocal: don't short-circuit default route filtering.
If no exit node is specified, the filter must still run to remove
offered default routes from all peers.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 20:33:18 -08:00
Brad Fitzpatrick
1e7a35b225 types/netmap: split controlclient.NetworkMap off into its own leaf package
Updates #1278

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-05 16:18:52 -08:00
Brad Fitzpatrick
ddfcc4326c types/persist: split controlclient.Persist into a small leaf package
This one alone doesn't modify the global dependency map much
(depaware.txt if anything looks slightly worse), but it leave
controlclient as only containing NetworkMap:

bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go
backend.go:     NetMap        *controlclient.NetworkMap // new netmap received
fake_test.go:   b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
fake_test.go:   b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
handle.go:      netmapCache       *controlclient.NetworkMap
handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap {

Once that goes into a leaf package, then ipn doesn't depend on
controlclient at all, and then the client gets smaller.

Updates #1278
2021-02-05 15:25:33 -08:00
David Anderson
a046b48593 cmd/tailscale/cli: display currently active exit node in tailscale status.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 14:53:17 -08:00
Brad Fitzpatrick
6064b6ff47 wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package
It couldn't move to ipnlocal due to test dependency cycles.

Updates #1278

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-05 14:21:30 -08:00
David Anderson
b9c2231fdf ipn: program exit node into the data plane according to user pref.
Part of #1153, #1154. Fixes #1224.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 13:07:11 -08:00
Brad Fitzpatrick
d76334d2f0 ipn: split LocalBackend off into new ipn/ipnlocal package
And move a couple other types down into leafier packages.

Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc.

Fixes #1181

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-04 14:04:23 -08:00