Allows the use of tsweb.LogHandler exclusively for callbacks describing the
handler HTTP requests.
Fixes#12837
Signed-off-by: Paul Scott <paul@tailscale.com>
Re-instates the functionality that generates CRD API docs, but using
a different library as the one we were using earlier seemed to have
some issues with its Git history.
Also regenerates the docs (make kube-generate-all).
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Remove the restriction that getent is skipped on non-Linux unixes.
Improve validation of the parsed output from getent, in case unknown
systems return unusable information.
Fixes#12730.
Signed-off-by: Ross Williams <ross@ross-williams.net>
Updates tailscale/corp#21949
As discussed with @raggi, this PR updates the static DERPMap embedded in the client to reflect the availability of HTTP on the DERP servers run by Tailscale.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
wgengine/magicsock,ipn: allow setting static node endpoints via tailscaled config file.
Adds a new StaticEndpoints field to tailscaled config
that can be used to statically configure the endpoints
that the node advertizes. This field will replace
TS_DEBUG_PRETENDPOINTS env var that can be used to achieve the same.
Additionally adds some functionality that ensures that endpoints
are updated when configfile is reloaded.
Also, refactor configuring/reconfiguring components to use the
same functionality when configfile is parsed the first time or
subsequent times (after reload). Previously a configfile reload
did not result in resetting of prefs. Now it does- but does not yet
tell the relevant components to consume the new prefs. This is to
be done in a follow-up.
Updates tailscale/tailscale#12578
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It is sometimes necessary to change a global lazy.SyncValue for the duration of a test. This PR adds a (*SyncValue[T]).SetForTest method to facilitate that.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The standard library includes these for strings and byte slices,
but it lacks similar functions for generic slices of comparable types.
Although they are not as commonly used, these functions are useful
in scenarios such as working with field index sequences (i.e., []int)
via reflection.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for container-like types such as Container[T] that
don't explicitly specify a view type for T. Instead, a package implementing
a container type should also implement and export a ContainerView[T, V] type
and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which
returns a view for the specified container, inferring the element view type V
from the element type T.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Bump node version to latest lts on the 18.x line which is 18.20.4 at the time of writing.
Updates https://github.com/tailscale/corp/issues/21741
Signed-off-by: Mario Minardi <mario@tailscale.com>
Windows requires routes to have a nexthop. Routes created using the interface's local IP address or an unspecified IP address ("0.0.0.0" or "::") as the nexthop are considered on-link routes. Notably, Windows treats on-link subnet routes differently, reserving the last IP in the range as the broadcast IP and therefore prohibiting TCP connections to it, resulting in WSA error 10049: "The requested address is not valid in its context. This does not happen with single-host routes, such as routes to Tailscale IP addresses, but becomes a problem with advertised subnets when all IPs in the range should be reachable.
Before Windows 8, only routes created with an unspecified IP address were considered on-link, so our previous approach of using the interface's own IP as the nexthop likely worked on Windows 7.
This PR updates configureInterface to use the TailscaleServiceIP (100.100.100.100) and its IPv6 counterpart as the nexthop for subnet routes.
Fixestailscale/support-escalations#57
Signed-off-by: Nick Khyl <nickk@tailscale.com>
With this change, the error handling and request logging are all done in defers
after calling inner.ServeHTTP. This ensures that any recovered values which we
want to re-panic with retain a useful stacktrace. However, we now only
re-panic from errorHandler when there's no outside logHandler. Which if you're
using StdHandler there always is. We prefer this to ensure that we are able to
write a 500 Internal Server Error to the client. If a panic hits http.Server
then the response is not sent back.
Updates #12784
Signed-off-by: Paul Scott <paul@tailscale.com>
... and then do approximately nothing with that information, other
than a big TODO. This is mostly me relearning this code and leaving
breadcrumbs for others in the future.
Updates #12724
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
StdHandler/retHandler would previously emit one log line for each request.
If there were multiple StdHandler in the chain, there would be one log line
per instance of retHandler.
With this change, only the outermost StdHandler/logHandler actually logs the
request or invokes OnStart or OnCompletion callbacks. The error-rendering part
of retHandler lives on in errorHandler, and errorHandler passes those errors up
the stack to logHandler through a callback that logHandler places in the
request.Context().
Updates tailscale/corp#19999
Signed-off-by: Paul Scott <paul@tailscale.com>
To match the format of exit node suggestions and ensure that the result
is not ambiguous, relax exit node CLI selection to permit using a FQDN
including the trailing dot.
Updates #12618
Change-Id: I04b9b36d2743154aa42f2789149b2733f8555d3f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Fixestailscale/tailscale#12794
We were printing some leftover debug logs within a callback function that would be executed after the test completion, causing the test to fail. This change drops the log calls to address the issue.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
If we get an non-disco presumably-wireguard-encrypted UDP packet from
an IP:port we don't recognize, rather than drop the packet, give it to
WireGuard anyway and let WireGuard try to figure out who it's from and
tell us.
This uses the new hook added in https://github.com/tailscale/wireguard-go/pull/27
Updates tailscale/corp#20732
Change-Id: I5c61a40143810592f9efac6c12808a87f924ecf2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some operations cannot be implemented with the prior API:
* Iterating over the map and deleting keys
* Iterating over the map and replacing items
* Calling APIs that expect a native Go map
Add a Map.WithLock method that acquires a write-lock on the map
and then calls a user-provided closure with the underlying Go map.
This allows users to interact with the Map as a regular Go map,
but with the gaurantees that it is concurrent safe.
Updates tailscale/corp#9115
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Updates tailscale/tailscale#4136
To reduce the likelihood of presenting spurious warnings, add the ability to delay the visibility of certain Warnables, based on a TimeToVisible time.Duration field on each Warnable. The default is zero, meaning that a Warnable is immediately visible to the user when it enters an unhealthy state.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This commit truncates any additional information (mainly hostnames) that's passed to controlD via DOH URL in DoHIPsOfBase.
This change is to make sure only resolverID is passed to controlDv6Gen but not the additional information.
Updates: #7946
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
