With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.
Part of #953.
Signed-off-by: David Anderson <danderson@tailscale.com>
It seems that all the setups that support split DNS understand
this distinction, and it's an important one when translating
high-level configuration.
Part of #953.
Signed-off-by: David Anderson <danderson@tailscale.com>
Correctly reports that Win7 cannot do split DNS, and has a helper to
discover the "base" resolvers for the system.
Part of #953
Signed-off-by: David Anderson <danderson@tailscale.com>
OS implementations are going to support split DNS soon.
Until they're all in place, hardcode Primary=true to get
the old behavior.
Signed-off-by: David Anderson <danderson@tailscale.com>
This is usually the same as the requested interface, but on some
unixes can vary based on device number allocation, and on Windows
it's the GUID instead of the pretty name, since everything relating
to configuration wants the GUID.
Signed-off-by: David Anderson <danderson@tailscale.com>
wgengine/router.CallbackRouter needs to support both the Router
and OSConfigurator interfaces, so the setters can't both be called
Set.
Signed-off-by: David Anderson <danderson@tailscale.com>
They need some rework to do the right thing, in the meantime the direct
and resolvconf managers will work out.
The resolved implementation was never selected due to control-side settings.
The networkmanager implementation mostly doesn't get selected due to
unforeseen interactions with `resolvconf` on many platforms.
Both implementations also need rework to support the various routing modes
they're capable of.
Signed-off-by: David Anderson <danderson@tailscale.com>
It's only use to skip some optional initialization during cleanup,
but that work is very minor anyway, and about to change drastically.
Signed-off-by: David Anderson <danderson@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
They're only used internally and in tests, and have surprising
semantics in that they only resolve MagicDNS names, not upstream
resolver queries.
Signed-off-by: David Anderson <danderson@tailscale.com>
Work around https://github.com/google/gvisor/issues/5732
by trying to read /proc/net/route with a larger bufsize if
it fails the first time.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
IPv6 Unique Local Addresses are sometimes used with Network
Prefix Translation to reach the Internet. In that respect
their use is similar to the private IPv4 address ranges
10/8, 172.16/12, and 192.168/16.
Treat them as sufficient for AnyInterfaceUp(), but specifically
exclude Tailscale's own IPv6 ULA prefix to avoid mistakenly
trying to bootstrap Tailscale using Tailscale.
This helps in supporting Google Cloud Run, where the addresses
are 169.254.8.1/32 and fddf:3978:feb1:d745::c001/128 on eth1.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The tstun packagen contains both constructors for generic tun
Devices, and a wrapper that provides additional functionality.
Signed-off-by: David Anderson <danderson@tailscale.com>
Now callers (wgengine/monitor) don't need to mutate the state to remove
boring interfaces before calling State.Equal. Instead, the methods
to remove boring interfaces from the State are removed, as is
the reflect-using Equal method itself, and in their place is
a new EqualFiltered method that takes a func predicate to match
interfaces to compare.
And then the FilterInteresting predicate is added for use
with EqualFiltered to do the job that that wgengine/monitor
previously wanted.
Now wgengine/monitor can keep the full interface state around,
including the "boring" interfaces, which we'll need for peerapi on
macOS/iOS to bind to the interface index of the utunN device.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have it already but threw it away. But macOS/iOS code will
be needing the interface index, so hang on to it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add proto to flowtrack.Tuple.
Add types/ipproto leaf package to break a cycle.
Server-side ACL work remains.
Updates #1516
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We strip them control-side anyway, and we already strip IPv4 link
local, so there's no point uploading them. And iOS has a ton of them,
which results in somewhat silly amount of traffic in the MapRequest.
We'll be doing same-LAN-inter-tailscaled link-local traffic a
different way, with same-LAN discovery.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We basically already had the RIB-parsing Go code for this in both
net/interfaces and wgengine/monitor, for other reasons.
Fixes#1426Fixes#1471
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So a region can be used if needed, but won't be STUN-probed or used as
its home.
This gives us another possible debugging mechanism for #1310, or can
be used as a short-term measure against DERP flip-flops for people
equidistant between regions if our hysteresis still isn't good enough.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
interfaces.State.String tries to print a concise summary of the
network state, removing any interfaces that don't have any or any
interesting IP addresses. On macOS and iOS, for instance, there are a
ton of misc things.
But the link monitor based its are-there-changes decision on
interfaces.State.Equal, which just used reflect.DeepEqual, including
comparing all the boring interfaces. On macOS, when turning wifi on or off, there
are a ton of misc boring interface changes, resulting in hitting an earlier
check I'd added on suspicion this was happening:
[unexpected] network state changed, but stringification didn't
This fixes that by instead adding a new
interfaces.State.RemoveUninterestingInterfacesAndAddresses method that
does, uh, that. Then use that in the monitor. So then when Equal is
used later, it's DeepEqualing the already-cleaned version with only
interesting interfaces.
This makes cmd/tailscaled debug --monitor much less noisy.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not beautiful, but I'm debugging connectivity problems on
NEProvider.sleep+wake and need more clues.
Updates #1426
Updates tailscale/corp#1289
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also change the type to netaddr.IP while here, because it made sorting
easier.
Updates tailscale/corp#1397
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We often see things in logs like:
2021-03-02 17:52:45.2456258 +0800 +0800: winhttp: Open: The parameter is incorrect.
2021-03-02 17:52:45.2506261 +0800 +0800: tshttpproxy: winhttp: GetProxyForURL("https://log.tailscale.io/c/tailnode.log.tailscale.io/5037bb42f4bc330e2d6143e191a7ff7e837c6be538139231de69a439536e0d68"): ERROR_INVALID_PARAMETER [unexpected]
I have a hunch that WinHTTP has thread-local state. If so, this would fix it.
If not, this is pretty harmless.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
DefaultRouteInterface was previously guarded by build tags such that
it was only accessible to tailscaled-on-macos, but there was no reason
for that. It runs fine in the sandbox and gives better default info,
so merge its file into interfaces_darwin.go.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And add a --socks5-server flag.
And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.
Co-authored with Naman Sood.
Updates #707
Updates #504
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* move probing out of netcheck into new net/portmapper package
* use PCP ANNOUNCE op codes for PCP discovery, rather than causing
short-lived (sub-second) side effects with a 1-second-expiring map +
delete.
* track when we heard things from the router so we can be less wasteful
in querying the router's port mapping services in the future
* use portmapper from magicsock to map a public port
Fixes#1298Fixes#1080Fixes#1001
Updates #864
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This allows proxy URLs such as:
http://azurediamond:hunter2@192.168.122.154:38274
to be used in order to dial out to control, logs or derp servers.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The interface.State logging tried to only log interfaces which had
interesting IPs, but the what-is-interesting checks differed between
the code that gathered the interface names to print and the printing
of their addresses.
Upstream wireguard-go decided to use errors.Is(err, net.ErrClosed)
instead of checking the error string.
It also provided an unsafe linknamed version of net.ErrClosed
for clients running Go 1.15. Switch to that.
This reduces the time required for the wgengine/magicsock tests
on my machine from ~35s back to the ~13s it was before
456cf8a376.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Unused for now, but I want to backport this commit to 1.4 so 1.6 can
start sending these and then at least 1.4 logs will stringify nicely.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The code was using a C "int", which is a signed 32-bit integer.
That means some valid IP addresses were negative numbers.
(In particular, the default router address handed out by AT&T
fiber: 192.168.1.254. No I don't know why they do that.)
A negative number is < 255, and so was treated by the Go code
as an error.
This fixes the unit test failure:
$ go test -v -run=TestLikelyHomeRouterIPSyscallExec ./net/interfaces
=== RUN TestLikelyHomeRouterIPSyscallExec
interfaces_darwin_cgo_test.go:15: syscall() = invalid IP, false, netstat = 192.168.1.254, true
--- FAIL: TestLikelyHomeRouterIPSyscallExec (0.00s)
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
