~97% of the log messages derper outputs are related to the normal
non-error state of a client disconnecting in some manner. Add a
verbose logging feature that only logs these messages when enabled.
Fixes#8024
Signed-off-by: Val <valerie@tailscale.com>
* wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer
For testing older client version responses to the PeerGone packet format change.
Updates #4326
Signed-off-by: Val <valerie@tailscale.com>
* derp: remove dead sclient struct member replaceLimiter
Leftover from an previous solution to the duplicate client problem.
Updates #2751
Signed-off-by: Val <valerie@tailscale.com>
* derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here
Extend the PeerGone message type by adding a reason byte. Send a
PeerGone "Not Here" message when an endpoint sends a disco message to
a peer that this server has no record of.
Fixes#4326
Signed-off-by: Val <valerie@tailscale.com>
---------
Signed-off-by: Val <valerie@tailscale.com>
This allows tracking packet flow via logs for prober clients. Note that
the new sclient.debug() function is called on every received packet, but
will do nothing for most clients.
I have adjusted sclient logging to print public keys in short format
rather than full. This takes effect even for existing non-debug logging
(mostly client disconnect messages).
Example logs for a packet being sent from client [SbsJn] (connected to
derper [dM2E3]) to client [10WOo] (connected to derper [AVxvv]):
```
derper [dM2E3]:
derp client 10.0.0.1:35470[SbsJn]: register single client mesh("10.0.1.1"): 4 peers
derp client 10.0.0.1:35470[SbsJn]: read frame type 4 len 40 err <nil>
derp client 10.0.0.1:35470[SbsJn]: SendPacket for [10WOo], forwarding via <derphttp_client.Client [AVxvv] url=https://10.0.1.1/derp>: <nil>
derp client 10.0.0.1:35470[SbsJn]: read frame type 0 len 0 err EOF
derp client 10.0.0.1:35470[SbsJn]: read EOF
derp client 10.0.0.1:35470[SbsJn]: sender failed: context canceled
derp client 10.0.0.1:35470[SbsJn]: removing connection
derper [AVxvv]:
derp client 10.0.1.1:50650[10WOo]: register single client
derp client 10.0.1.1:50650[10WOo]: received forwarded packet from [SbsJn] via [dM2E3]
derp client 10.0.1.1:50650[10WOo]: sendPkt attempt 0 enqueued
derp client 10.0.1.1:50650[10WOo]: sendPacket from [SbsJn]: <nil>
derp client 10.0.1.1:50650[10WOo]: read frame type 0 len 0 err EOF
derp client 10.0.1.1:50650[10WOo]: read EOF
derp client 10.0.1.1:50650[10WOo]: sender failed: context canceled
derp client 10.0.1.1:50650[10WOo]: removing connection
```
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Instead of iterating over the map to determine the preferred forwarder
on every packet (which could happen concurrently with map mutations),
store it separately in an atomic variable.
Fixes#6445
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Periodically poll the TCP RTT metric from all open TCP connections and
update a (bucketed) histogram metric.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6214902196b05bf7829c9d0ea501ce0e13d984cf
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This allows tests to verfiy that a DERP connection was actually
established.
Related to #4326
Updates tailscale/corp#2579
Signed-off-by: Maisem Ali <maisem@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So magicsock can later ask a DERP connection whether its source IP
would've changed if it reconnected.
Updates #3619
Change-Id: Ibc8810340c511d6786b60c78c1a61c09f5800e40
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for a future change to have client ping derp connections
when their state is questionable, rather than aggressively tearing
them down and doing a heavy reconnect when their state is unknown.
We already support ping/pong in the other direction (servers probing
clients) so we already had the two frame types, but I'd never finished
this direction.
Updates #3619
Change-Id: I024b815d9db1bc57c20f82f80f95fb55fc9e2fcc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A public key should only have max one connection to a given
DERP node (or really: one connection to a node in a region).
But if people clone their machine keys (e.g. clone their VM, Raspbery
Pi SD card, etc), then we can get into a situation where a public key
is connected multiple times.
Originally, the DERP server handled this by just kicking out a prior
connections whenever a new one came. But this led to reconnect fights
where 2+ nodes were in hard loops trying to reconnect and kicking out
their peer.
Then a909d37a59 tried to add rate
limiting to how often that dup-kicking can happen, but empirically it
just doesn't work and ~leaks a bunch of goroutines and TCP
connections, tying them up for hour+ while more and more accumulate
and waste memory. Mostly because we were doing a time.Sleep forever
while not reading from their TCP connections.
Instead, just accept multiple connections per public key but track
which is the most recent. And if two both are writing back & forth,
then optionally disable them both. That last part is only enabled in
tests for now. The current default policy is just last-sender-wins
while we gather the next round of stats.
Updates #2751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If a peer is connected to multiple nodes in a region (so
multiForwarder is in use) and then a node restarts and re-sends all
its additions, this bug about whether an element is in the
multiForwarder could cause a one-time flip in the which peer node we
forward to. Note a huge deal, but not written as intended.
Thanks to @lewgun for the bug report in #2141.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was once believed that it might be useful. It wasn't. We never used it.
Remove it so we don't slowly leak memory.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a flag to the DERP server which specifies to verify clients through a local
tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for
users who want to run their own DERP servers. It assumes there is a local tailscaled running and
will attempt to hit it for peer status information.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
Before it was using the local address and port, so fix that.
The fields in the response from `ss` are:
State, Recv-Q, Send-Q, Local Address:Port, Peer Address:Port, Process
Signed-off-by: julianknodt <julianknodt@gmail.com>
This adds a handler on the DERP server for logging bytes send and received by clients of the
server, by holding open a connection and recording if there is a difference between the number
of bytes sent and received. It sends a JSON marshalled object if there is an increase in the
number of bytes.
Signed-off-by: julianknodt <julianknodt@gmail.com>
It would be useful to know the time that packets spend inside of a queue before they are sent
off, as that can be indicative of the load the server is handling (and there was also an
existing TODO). This adds a simple exponential moving average metric to track the average packet
queue duration.
Changes during review:
Add CAS loop for recording queue timing w/ expvar.Func, rm snake_case, annotate in milliseconds,
convert
Signed-off-by: julianknodt <julianknodt@gmail.com>
When building with redo, also include the git commit hash
from the proprietary repo, so that we have a precise commit
that identifies all build info (including Go toolchain version).
Add a top-level build script demonstrating to downstream distros
how to burn the right information into builds.
Adjust `tailscale version` to print commit hashes when available.
Fixes#841.
Signed-off-by: David Anderson <danderson@tailscale.com>
