Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
To reduce the likelihood of breaking users,
if we implement stricter Exact path type matching in the future.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: fix base truncating for extra long Service names
StatefulSet names for ingress/egress proxies are calculated
using Kubernetes name generator and the parent resource name
as a base.
The name generator also cuts the base, but has a higher max cap.
This commit fixes a bug where, if we get a shortened base back
from the generator, we cut off too little as the base that we
have cut will be passed into the generator again, which will
then itself cut less because the base is shorter- so we end up
with a too long name again.
Updates tailscale/tailscale#10807
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
cmd/k8s-operator: add CRD to chart and static manifest
Add functionality to insert CRD to chart at package time.
Insert CRD to static manifests as this is where they are currently consumed from.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator: generate static manifests from Helm charts
This is done to ensure that there is a single source of truth
for the operator kube manifests.
Also adds linux node selector to the static manifests as
this was added as a default to the Helm chart.
Static manifests can now be generated by running
`go generate tailscale.com/cmd/k8s-operator`.
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot: proxy traffic to tailnet target defined by FQDN
Add a new Service annotation tailscale.com/tailnet-fqdn that
users can use to specify a tailnet target for which
an egress proxy should be deployed in the cluster.
Updates tailscale/tailscale#10280
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values.
Calculate whether a StatefulSet name generated for a Service or Ingress
will be too long and if so, truncate it.
Updates tailscale/tailscale#10284
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates tailscale/tailscale#9222
plain k8s-operator should have hostinfo.App set to 'k8s-operator', operator with proxy should have it set to 'k8s-operator-proxy'. In proxy mode, we were setting the type after it had already been set to 'k8s-operator'
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
API v1 is compatible with helm v2 and v2 is not.
However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020
and no-one should be using it anymore.
This PR also adds a CI lint test for helm chart
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Users should delete proxies by deleting or modifying the k8s cluster resources
that they used to tell the operator to create they proxy. With this flow,
the tailscale operator will delete the associated device from the control.
However, in some cases users might have already deleted the device from the control manually.
Updates tailscale/tailscale#9773
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator: users can configure operator to set firewall mode for proxies
Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode
Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service.
Updates tailscale/tailscale#9310
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were too strict and required the user not specify the host field at all
in the ingress rules, but that degrades compatibility with existing helm charts.
Relax the constraint so that rule.Host can either be empty, or match the tls.Host[0]
value exactly.
Fixes#9548
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Replace the deprecated var with the one in docs to avoid confusion.
Introduced in 335a5aaf9a.
Updates #8317Fixes#9764
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when there is an event on a Tailscale managed Ingress or Service child resource, the right parent type gets reconciled
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It was tailscale.com/ts-tailnet-target-ip, which was pretty
redundant. Change it to tailscale.com/tailnet-ip.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The kube-apiserver proxy in the operator would only run in
auth proxy mode but thats not always desirable. There are
situations where the proxy should just be a transparent
proxy and not inject auth headers, so do that using a new
env var APISERVER_PROXY and deprecate the AUTH_PROXY env.
THe new env var has three options `false`, `true` and `noauth`.
Updates #8317
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Instead of confusing users, emit an event that explicitly tells the
user that HTTPS is disabled on the tailnet and that ingress may not
work until they enable it.
Updates #9141
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensures that Statefulset reconciler config has only one of Cluster target IP or tailnet target IP.
Adds a test case for containerboot egress proxy mode.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
First part of work for the functionality that allows users to create an egress
proxy to access Tailnet services from within Kubernetes cluster workloads.
This PR allows creating an egress proxy that can access Tailscale services over HTTP only.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This was added in 3451b89e5f, but
resulted in the v6 Tailscale address being added to status when
when the forwarding only happened on the v4 address.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The new ingress reconcile raises events on failure, but I forgot to
add the updated permission.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously, the operator would only monitor Services and create
a Tailscale StatefulSet which acted as a L3 proxy which proxied
traffic inbound to the Tailscale IP onto the services ClusterIP.
This extends that functionality to also monitor Ingress resources
where the `ingressClassName=tailscale` and similarly creates a
Tailscale StatefulSet, acting as a L7 proxy instead.
Users can override the desired hostname by setting:
```
- tls
hosts:
- "foo"
```
Hostnames specified under `rules` are ignored as we only create a single
host. This is emitted as an event for users to see.
Fixes#7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously users would have to unexpose/expose the service in order to
change Hostname/TargetIP. This now applies those changes by causing a
StatefulSet rollout now that a61a9ab087 is in.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I forgot to move the defer out of the func, so the tsnet.Server
immediately closed after starting.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was jumbled doing a lot of things, this breaks it up into
the svc reconciliation and the tailscale sts reconciliation.
Prep for future commit.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
