Add left and right padding around entire client so that the cards don't
run into the side of the screen. Also tighten up vertical spacing in
couple of places.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Add metric logging logic for the web client frontend. This is an initial
pass of adding the base logic, plus a single point where it is used for
validation that the logging is working correctly. More metric logging
calls will follow in subsquent PRs.
Updates https://github.com/tailscale/tailscale/issues/10261
Signed-off-by: Mario Minardi <mario@tailscale.com>
If the login client is inside an iframe, open the management client in a
new window, since it can't be loaded in the frame.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
If the currently selected exit node is offline, render the exit node
selector in red with an error message. Update exit nodes in the dropdown
to indicate if they are offline, and don't allow them to be selected.
This also updates some older color values to use the new colors.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Makes the following changes:
* Use “link” class in various spots
* Remove button appearance on Exit Node dropdown in readonly mode
* Update `-stone-` colors to `-gray-` (couple spots missed by
original color config commit)
* Pull full ui/button component from admin panel, and update
buttons throughout UI to use this component
* Remove various buttons in readonly view to match mocks
* Add route (and “pending approval”) highlights to Subnet router
settings card
* Delete legacy client button styles from index.css
* Fix overflow of IPv6 address on device details view
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Use the packet filter rules to determine if any device is allowed to
connect on port 5252. This does not check whether a specific device can
connect (since we typically don't know the source device when this is
used). Nor does it specifically check for wide-open ACLs, which is
something we may provide a warning about in the future.
Update the login popover content to display information when the src
device is unable to connect to the dst device over its Tailscale IP. If
we know it's an ACL issue, mention that, otherwise list a couple of
things to check. In both cases, link to a placeholder URL to get more
information about web client connection issues.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Fixes a TODO in web.authorizeRequest.
`getSession` calls `WhoIs` already. Call `getSession` earlier in
`authorizeRequest` so we can avoid the duplicate `WhoIs` check on
the same request.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
client/web: skip check mode for non-tailscale.com control servers
Only enforce check mode if the control server URL ends in
".tailscale.com". This allows the web client to be used with headscale
(or other) control servers while we work with the project to add check
mode support (tracked in juanfont/headscale#1623).
Updates #10261
Co-authored-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
6e30c9d1f added eslint to the web client. As a part of that change,
the existing yarn.lock file was removed and yarn install run to build
with a clean yarn dependencies set with latest versions. This caused
a change in the "vite-plugin-rewrite-all" package that fails at build
time with our existing vite config. This is a known bug with some
suggested fixes:
https://vitejs.dev/guide/troubleshooting.html#this-package-is-esm-only
Rather than editing our package.json type, this commit reverts back
the yarn.lock file to it's contents at the commit just before 6e30c9d1f
and then only runs yarn install to add the new eslint packages, rather
than installing the latest versions of all packages.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add eslint to require stricter typescript rules, particularly around
required hook dependencies. This commit also updates any files that
were now throwing errors with eslint.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Enforcing inclusion of our OSS license at the top of .ts and .tsx
files. Also updates any relevant files in the repo that were
previously missing the license comment. An additional `@license`
comment is added to client/web/src/index.tsx to preserve the
license in generated Javascript.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This adds an expandable section of the login view to allow users to
specify an auth key and an alternate control URL.
Input and Collapsible components and accompanying styles were brought
over from the adminpanel.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Adds Inter font and uses it as the default for the web UI.
Creates a new /assets folder to house the /fonts, and moves /icons
to live here too.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add exit node selector (in full management client only) that allows
for advertising as an exit node, or selecting another exit node on
the Tailnet for use.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This creates a new /api/up endpoint which is exposed in the login
client, and is solely focused on logging in. Login has been removed from
the nodeUpdate endpoint.
This also adds support in the LoginClientView for a stopped node that
just needs to reconnect, but not necessarily reauthenticate. This
follows the same pattern in `tailscale up` of just setting the
WantRunning user pref.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This change removes the existing debug-web-client localapi endpoint
and replaces it with functions passed directly to the web.ServerOpts
when constructing a web.ManageServerMode client.
The debug-web-client endpoint previously handled making noise
requests to the control server via the /machine/webclient/ endpoints.
The noise requests must be made from tailscaled, which has the noise
connection open. But, now that the full client is served from
tailscaled, we no longer need to proxy this request over the localapi.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
When the viewing user is accessing a webclient not over Tailscale,
they must connect over Tailscale before being able to log into the
full management client, which is served over TS. This change adds
a check that the user is able to access the node's tailscale IP.
If not able to, the signin button is disabled. We'll also be adding
Copy here to help explain to the user that they must connect to
Tailscale before proceeding.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
I don't believe this has ever worked, since we didn't allow POST
requests in the login client. But previously, we were primarily using
the legacy client, so it didn't really matter. Now that we've removed
the legacy client, we have no way to login.
This fixes the login client, allowing it to login, but it still needs to
be refactored to expose a dedicated login method, without exposing all
the node update functionality.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
No longer using this! Readonly state fully managed via auth endpoint.
Also getting rid of old Legacy server mode.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We currently disable the exit-node drop down selector when the user is
in read-only mode, but we missed disabling the "Disable" button also.
Previously, it would display an error when clicked.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Move Header component inside Router so that links are relative to the
router base URL.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
In production, the asset handler is receiving requests for pages like
/details, which results in a 404. Instead, if we know the requested file
does not exist, serve the main index page and let wouter route it
appropriately on the frontend.
Updates tailscale/corp/#14335
Signed-off-by: Will Norris <will@tailscale.com>
After logging in, the `?check=now` query string is still present if it
was passed. Reloading the page causes a new check mode to be triggered,
even though the user has an active session. Only trigger the automatic
check mode if the user is not already able to manage the device.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Fills /details page with real values, passed back from the /data
endpoint.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Initial addition of device details view on the frontend. A little
more backend piping work to come to fill all of the detail fields,
for now using placeholders.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We render the readonly view in two situations:
- the client is in login mode, and the device is connected
- the client is in manage mode, but the user does not yet have a session
If the user is not authenticated, and they are not currently on the
Tailscale IP address, render a "Manage" button that will take them to
the Tailcale IP of the device and immediately start check mode.
Still to do is detecting if they have connectivity to the Tailscale IP,
and disabling the button if not.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Previously had HMR websocket set to run from a different port
than the http proxy server. This was an old setting carried over
from the corp repo admin panel config. It's messing with hot
reloads when run from the tailscaled web client, as it keeps
causing the full page to refresh each time a connection is made.
Switching back to the default config here fixes things.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
