This is in response to logs from a customer that show that we're unable
to run netsh due to the following error:
router: firewall: adding Tailscale-Process rule to allow UDP for "C:\\Program Files\\Tailscale\\tailscaled.exe" ...
router: firewall: error adding Tailscale-Process rule: exec: "netsh": cannot run executable found relative to current directory:
There's approximately no reason to ever dynamically look up the path of
a system utility like netsh.exe, so instead let's first look for it
in the System32 directory and only if that fails fall back to the
previous behaviour.
Updates #10804
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I68cfeb4cab091c79ccff3187d35f50359a690573
Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux
Updates #9084.
Currently, we have to tell users to manually open UDP ports on Linux when
certain firewalls (like ufw) are enabled. This change automates the process of
adding and updating those firewall rules as magicsock changes what port it
listens on.
Signed-off-by: Naman Sood <mail@nsood.in>
This will enable the runner to be replaced as a configuration side
effect in a later change.
Updates tailscale/corp#14029
Signed-off-by: James Tucker <james@tailscale.com>
This migrates containerboot to reuse the NetfilterRunner used
by tailscaled instead of manipulating iptables rule itself.
This has the added advantage of now working with nftables and
we can potentially drop the `iptables` command from the container
image in the future.
Updates #9310
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Just a refactor to consolidate the firewall detection logic in a single
package so that it can be reused in a later commit by containerboot.
Updates #9310
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Then use it in tailcfg which had it duplicated a couple times.
I think we have it a few other places too.
And use slices.Equal in wgengine/router too. (found while looking for callers)
Updates #cleanup
Change-Id: If5350eee9b3ef071882a3db29a305081e4cd9d23
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet. I just converted the relatively awkward struct{}-valued
maps.
Updates #cleanup
Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Due to the conflict between our nftables implementation and ufw, which is a common utility used
on linux. We now want to take a step back to prevent regression. This will give us more chance to
let users to test our nftables support and heuristic.
Updates: #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
To record wether user is using iptables or nftables after we add support to nftables on linux, we
are adding a field FirewallMode to NetInfo in HostInfo to reflect what firewall mode the host is
running, and form metrics. The information is gained from a global constant in hostinfo.go. We
set it when selection heuristic made the decision, and magicsock reports this to control.
Updates: tailscale/corp#13943
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
The current router errors out when neither iptables nor nftables support is present. We
should fall back to the previous behaviour which we creates a dummy iptablesRunner.
Fixes: #8878
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
This commit replaces the TS_DEBUG_USE_NETLINK_NFTABLES envknob with
a TS_DEBUG_FIREWALL_MODE that should be set to either 'iptables' or
'nftables' to select firewall mode manually, other wise tailscaled
will automatically choose between iptables and nftables depending on
environment and system availability.
updates: #319
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
This commit adds nftable rule injection for tailscaled. If tailscaled is
started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router
will use nftables to manage firewall rules.
Updates: #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
The MacOS client can't set the MTU when creating the tun due to lack
of permissions, so add it to the router config and have MacOS set it
in the callback using a method that it does have permissions for.
Updates #8219
Signed-off-by: Val <valerie@tailscale.com>
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere.
Extract the default into a function that can apply this centrally and
use it everywhere.
Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL
happy when using converted values.
Updates #5915
Signed-off-by: James Tucker <james@tailscale.com>
WSL has started to set the eth0 default route interface default to 1280
MTU, which is too low to carry 1280 byte packets from tailscale0 once
wrapped in WireGuard. The change down to 1280 is very likely smaller
than necessary for almost all users. We can not easily determine the
ideal MTU, but if all the preconditions match, we raise the MTU to 1360,
which is just enough for Tailscale traffic to work.
Updates #4833
Updates #7346
Signed-off-by: James Tucker <james@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Adjust the expected system output by removing the unsupported mask
component including and after the slash in expected output like:
fwmask 0xabc/0xdef
This package's tests now pass in an Alpine container when the 'go' and
'iptables' packages are installed (and run as privileged so /dev/net/tun
exists).
Fixes#5928
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id1a3896282bfa36b64afaec7a47205e63ad88542
This patch removes the crappy, half-backed COM initialization used by `go-ole`
and replaces that with the `StartRuntime` function from `wingoes`, a library I
have started which, among other things, initializes COM properly.
In particular, we should always be initializing COM to use the multithreaded
apartment. Every single OS thread in the process becomes implicitly initialized
as part of the MTA, so we do not need to concern ourselves as to whether or not
any particular OS thread has initialized COM. Furthermore, we no longer need to
lock the OS thread when calling methods on COM interfaces.
Single-threaded apartments are designed solely for working with Win32 threads
that have a message pump; any other use of the STA is invalid.
Fixes https://github.com/tailscale/tailscale/issues/3137
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The health package was turning into a rando dumping ground. Make a new
Warnable type instead that callers can request an instance of, and
then Set it locally in their code without the health package being
aware of all the things that are warnable. (For plenty of things the
health package will want to know details of how Tailscale works so it
can better prioritize/suppress errors, but lots of the warnings are
pretty leaf-y and unrelated)
This just moves two of the health warnings. Can probably move more
later.
Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Noticed when testing FUS on tailscale-on-macOS, that routing would break
completely when switching between profiles. However, it would start working
again when going back to the original profile tailscaled started with.
Turns out that if we change the addrs on the interface we need to remove and readd
all the routes.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Deleting may temporarily result in no addrs on the interface, which results in
all other rules (like routes) to get dropped by the OS.
I verified this fixes the problem.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Always set the MTU to the Tailscale default MTU. In practice we are
missing applying an MTU for IPv6 on Windows prior to this patch.
This is the simplest patch to fix the problem, the code in here needs
some more refactoring.
Fixes#5914
Signed-off-by: James Tucker <james@tailscale.com>
Context: https://github.com/tailscale/tailscale/pull/5588#issuecomment-1260655929
It seems that if the interface at index 1 is down, the rule is not installed. As such,
we increase the range we detect up to 2004 in the hope that at least one of the interfaces
1-4 will be up.
Signed-off-by: Tom DNetto <tom@tailscale.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This change masks the bitspace used when setting and querying the fwmark on packets. This allows
tailscaled to play nicer with other networking software on the host, assuming the other networking
software is also using fwmarks & a different mask.
IPTables / mark module has always supported masks, so this is safe on the netfilter front.
However, busybox only gained support for parsing + setting masks in 1.33.0, so we make sure we
arent such a version before we add the "/<mask>" syntax to an ip rule command.
Signed-off-by: Tom DNetto <tom@tailscale.com>
