We were creating the controlclient and starting the portpoll concurrently,
which frequently resulted in the first controlclient connection being canceled
by the firsdt portpoll result ~milliseconds later, resulting in another
HTTP request.
Instead, wait a bit for the first portpoll result so it's much less likely to
interrupt our controlclient connection.
Updates tailscale/corp#557
This partially (but not yet fully) migrates Windows to tailscaled's
StateStore storage system.
This adds a new bool Pref, ForceDaemon, defined as:
// ForceDaemon specifies whether a platform that normally
// operates in "client mode" (that is, requires an active user
// logged in with the GUI app running) should keep running after the
// GUI ends and/or the user logs out.
//
// The only current applicable platform is Windows. This
// forced Windows to go into "server mode" where Tailscale is
// running even with no users logged in. This might also be
// used for macOS in the future. This setting has no effect
// for Linux/etc, which always operate in daemon mode.
Then, when ForceDaemon becomes true, we now write use the StateStore
to track which user started it in server mode, and store their prefs
under that key.
The ipnserver validates the connections/identities and informs that
LocalBackend which userid is currently in charge.
The GUI can then enable/disable server mode at runtime, without using
the CLI.
But the "tailscale up" CLI was also fixed, so Windows users can use
authkeys or ACL tags, etc.
Updates #275
It was previously possible for two different Windows users to connect
to the IPN server at once, but it didn't really work. They mostly
stepped on each other's toes and caused chaos.
Now only one can control it, but it can be active for everybody else.
Necessary dependency step for Windows server/headless mode (#275)
While here, finish wiring up the HTTP status page on Windows, now that
all the dependent pieces are available.
If no interfaces are up, calm down and stop spamming so much. It was
noticed as especially bad on Windows, but probably was bad
everywhere. I just have the best network conditions testing on a
Windows VM.
Updates #604
So previous routes aren't shadowing resources that the operating
system might need (Windows Domain Controller, DNS server, corp HTTP
proxy, WinHTTP fetching the PAC file itself, etc).
This effectively detects when we're transitioning from, say, public
wifi to corp wifi and makes Tailscale remove all its routes and stops
its TCP connections and tries connecting to everything anew.
Updates tailscale/corp#653
We depend on DERP for NAT traversal now[0] so disabling it entirely can't
work.
What we'll do instead in the future is let people specify
alternate/additional DERP servers. And perhaps in the future we could
also add a pref for nodes to say when they expect to never need/want
to use DERP for data (but allow it for NAT traversal communication).
But this isn't the right pref and it doesn't work, so delete it.
Fixes#318
[0] https://tailscale.com/blog/how-nat-traversal-works/
It's properly handled later in tsdns.NewMap anyway, but there's work
done in the meantime that can be skipped when a peer lacks a DNS name.
It's also more clear that it's okay for it to be blank.
Also remove rebinding logic from the windows router. Magicsock will
instead rebind based on link change signals.
Signed-off-by: David Anderson <danderson@tailscale.com>
The test's LocalBackend was not shut down (Shutdown both releases
resources and waits for its various goroutines to end). This should
fix the test race we were seeing. It definitely fixes the file
descriptor leak that preventing -race -count=500 from passing before.
Start of making the IPN state machine react to link changes and down
its DNS & routes if necessary to unblock proxy resolution (e.g. for
transitioning from public to corp networks where the corp network has
mandatory proxies and WPAD PAC files that can't be resolved while
using the DNS/routes configured previously)
This change should be a no-op. Just some callback plumbing.
For example:
$ tailscale ping -h
USAGE
ping <hostname-or-IP>
FLAGS
-c 10 max number of pings to send
-stop-once-direct true stop once a direct path is established
-verbose false verbose output
$ tailscale ping mon.ts.tailscale.com
pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms
pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms
pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms
Fixes#661
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also, bit of behavior change: on non-nil err but expired context,
don't reset the consecutive failure count. I don't think the old
behavior was intentional.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't
shut down in that case.
This reverts commit 43b271cb26.
Signed-off-by: David Anderson <danderson@tailscale.com>
ORder of operations to trigger a problem:
- Start an already authed tailscaled, verify you can ping stuff.
- Run `tailscale up`. Notice you can no longer ping stuff.
The problem is that `tailscale up` stops the IPN state machine before
restarting it, which zeros out the packet filter but _not_ the packet
filter hash. Then, upon restarting IPN, the uncleared hash incorrectly
makes the code conclude that the filter doesn't need updating, and so
we stay with a zero filter (reject everything) for ever.
The fix is simply to update the filterHash correctly in all cases,
so that running -> stopped -> running correctly changes the filter
at every transition.
Signed-off-by: David Anderson <danderson@tailscale.com>
We need to emit Prefs when it *has* changed, not when it hasn't.
Test is added in our e2e test, separately.
Fixes: #620
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
So a backend in server-an-error state (as used by Windows) can try to
create a new Engine again each time somebody re-connects, relaunching
the GUI app.
(The proper fix is actually fixing Windows issues, but this makes things better
in the short term)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This prevents hostname being forced to os.Hostname despite override
when control is contacted for the first time after starting tailscaled.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
The StartLoginInteractive command is for delegating the sign-in flow
to a browser. The Android Gooogle Sign-In SDK inverts the flow by
giving the client ID tokens.
Add a new backend command for accepting such tokens by exposing the existing
controlclient.Client.Login support for OAuth2 tokens. Introduce a custom
TokenType to distinguish ID tokens from other OAuth2 tokens.
Signed-off-by: Elias Naur <mail@eliasnaur.com>
We want the macOS Network Extension to share fate with the UI frontend,
so we need the backend to know when the frontend disappears.
One easy way to do that is to reuse the existing TCP server it's
already running (for tailscale status clietns).
We now tell the frontend our ephemeral TCP port number, and then have
the UI connect to it, so the backend can know when it disappears.
There are likely Swift ways of doing this, but I couldn't find them
quickly enough, so I reached for the hammer I knew.
This change adds to tsdns the ability to delegate lookups to upstream nameservers.
This is crucial for setting Magic DNS as the system resolver.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
There's a lot of confusion around what tailscale status shows, so make it better:
show region names, last write time, and put stars around DERP too if active.
Now stars are always present if activity, and always somewhere.
It's just a config wrapper that passes "use less memory at the
expense of compression" parameters by default, so that we don't
accidentally construct resource-hungry (de)compressors.
Also includes a benchmark that measures the memory cost of the
small variants vs. the stock variants. The savings are significant
on both compressors (~8x less memory) and decompressors (~1.4x less,
not including the savings from the significantly smaller
window on the compression side - with those savings included it's
more like ~140x smaller).
BenchmarkSmallEncoder-8 56174 19354 ns/op 31 B/op 0 allocs/op
BenchmarkSmallEncoderWithBuild-8 2900 382940 ns/op 1746547 B/op 36 allocs/op
BenchmarkStockEncoder-8 48921 25761 ns/op 286 B/op 0 allocs/op
BenchmarkStockEncoderWithBuild-8 426 2630241 ns/op 13843842 B/op 124 allocs/op
BenchmarkSmallDecoder-8 123814 9344 ns/op 0 B/op 0 allocs/op
BenchmarkSmallDecoderWithBuild-8 41547 27455 ns/op 27694 B/op 31 allocs/op
BenchmarkStockDecoder-8 129832 9417 ns/op 1 B/op 0 allocs/op
BenchmarkStockDecoderWithBuild-8 25561 51751 ns/op 39607 B/op 92 allocs/op
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new magicsock endpoint type only used when both sides
support discovery (that is, are advertising a discovery
key). Otherwise the old code is used.
So far the new code only communicates over DERP as proof that the new
code paths are wired up. None of the actually discovery messaging is
implemented yet.
Support for discovery (generating and advertising a key) are still
behind an environment variable for now.
Updates #483
Later we'll want to use the presence of a discovery key as a signal
that the node knows how to participate in discovery. Currently the
code generates keys and sends them to the control server but doesn't
do anything with them, which is a bad state to stay in lest we release
this code and end up with nodes in the future that look like they're
functional with the new discovery protocol but aren't.
So for now, make this opt-in as a debug option for now, until the rest
of it is in.
Updates #483
The zstd library treats that limit as a hard cap on decompressed
size, in the mode we're using it, rather than a window size.
Signed-off-by: David Anderson <danderson@tailscale.com>
Overriding the hostname is required for Android, where os.Hostname
is often just "localhost".
Updates #409
Signed-off-by: Elias Naur <mail@eliasnaur.com>
This removes the use of suppress_ifgroup and fwmark "x/y" notation,
which are, among other things, not available in busybox and centos6.
We also use the return codes from the 'ip' program instead of trying to
parse its output.
I also had to remove the previous hack that routed all of 100.64.0.0/10
by default, because that would add the /10 route into the 'main' route
table instead of the new table 88, which is no good. It was a terrible
hack anyway; if we wanted to capture that route, we should have
captured it explicitly as a subnet route, not as part of the addr. Note
however that this change affects all platforms, so hopefully there
won't be any surprises elsewhere.
Fixes#405
Updates #320, #144
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.
And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)
This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.
Also fix some test flakes & races.
Fixes#387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes#399 (wgengine: flaky tests)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The compressed blobs we send back and forth are small and infrequent,
which doesn't justify the 8MB * GOMAXPROCS memory that was being
allocated. This was the overwhelming majority of memory use in
tailscaled. On my system it goes from ~100M RSS to ~15M RSS (which is
still suspiciously high, but we can worry about that more later).
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
If a test calls log.Printf, 'go test' horrifyingly rearranges the
output to no longer be in chronological order, which makes debugging
virtually impossible. Let's stop that from happening by making
log.Printf panic if called from any module, no matter how deep, during
tests.
This required us to change the default error handler in at least one
http.Server, as well as plumbing a bunch of logf functions around,
especially in magicsock and wgengine, but also in logtail and backoff.
To add insult to injury, 'go test' also rearranges the output when a
parent test has multiple sub-tests (all the sub-test's t.Logf is always
printed after all the parent tests t.Logf), so we need to screw around
with a special Logf that can point at the "current" t (current_t.Logf)
in some places. Probably our entire way of using subtests is wrong,
since 'go test' would probably like to run them all in parallel if you
called t.Parallel(), but it definitely can't because the're all
manipulating the shared state created by the parent test. They should
probably all be separate toplevel tests instead, with common
setup/teardown logic. But that's a job for another time.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Right now, filtering and packet injection in wgengine depend
on a patch to wireguard-go that probably isn't suitable for upstreaming.
This need not be the case: wireguard-go/tun.Device is an interface.
For example, faketun.go implements it to mock a TUN device for testing.
This patch implements the same interface to provide filtering
and packet injection at the tunnel device level,
at which point the wireguard-go patch should no longer be necessary.
This patch has the following performance impact on i7-7500U @ 2.70GHz,
tested in the following namespace configuration:
┌────────────────┐ ┌─────────────────────────────────┐ ┌────────────────┐
│ $ns1 │ │ $ns0 │ │ $ns2 │
│ client0 │ │ tailcontrol, logcatcher │ │ client1 │
│ ┌─────┐ │ │ ┌──────┐ ┌──────┐ │ │ ┌─────┐ │
│ │vethc│───────┼────┼──│vethrc│ │vethrs│──────┼─────┼──│veths│ │
│ ├─────┴─────┐ │ │ ├──────┴────┐ ├──────┴────┐ │ │ ├─────┴─────┐ │
│ │10.0.0.2/24│ │ │ │10.0.0.1/24│ │10.0.1.1/24│ │ │ │10.0.1.2/24│ │
│ └───────────┘ │ │ └───────────┘ └───────────┘ │ │ └───────────┘ │
└────────────────┘ └─────────────────────────────────┘ └────────────────┘
Before:
---------------------------------------------------
| TCP send | UDP send |
|------------------------|------------------------|
| 557.0 (±8.5) Mbits/sec | 3.03 (±0.02) Gbits/sec |
---------------------------------------------------
After:
---------------------------------------------------
| TCP send | UDP send |
|------------------------|------------------------|
| 544.8 (±1.6) Mbits/sec | 3.13 (±0.02) Gbits/sec |
---------------------------------------------------
The impact on receive performance is similar.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
This saves a layer of translation, and saves us having to
pass in extra bits and pieces of the netmap and prefs to
wgengine. Now it gets one Wireguard config, and one OS
network stack config.
Signed-off-by: David Anderson <danderson@tailscale.com>
For "tailscale status" on macOS (from separately downloaded
cmd/tailscale binary against App Store IPNExtension).
(This isn't all of it, but I've had this sitting around uncommitted.)
Implement rate limiting on log messages
Addresses issue #317, where logs can get spammed with the same message
nonstop. Created a rate limiting closure on logging functions, which
limits the number of messages being logged per second based on format
string. To keep memory usage as constant as possible, the previous cache
purging at periodic time intervals has been replaced by an LRU that
discards the oldest string when the capacity of the cache is reached.
Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>
These will be used for dynamically changing the identity of a node, so
its ACL rights can be different from your own.
Note: Not all implemented yet on the server side, but we need this so
we can request the tagged rights in the first place.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
We were printing "Shields Up" when the netmap wasn't initialized yet,
which while technically effectively true, turned out to be confusing
when trying to debug things.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
When shields are up, no services are available to connect to, so hide
them all. This will also help them disappear from the UI menu on
other nodes.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This sets a default packet filter that blocks all incoming requests,
giving end users more control over who can get into their machine, even
if the admin hasn't set any central ACLs.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
- Reset() was not including a Version field, so was getting rejected;
the Logout operation no longer happened when the client got disconnected.
- Don't crash if we can't decode 0-byte messages, which I suspect might
sometimes come through on EOF.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
The tests cheat at filling out web forms by directly POSTing to
the target. The target for authURLs has changed slightly, the base
authURL now redirects the user to the login page.
Additionally, the authURL cycle now checks the cookie is set
correctly, so we add cookie jars where necessary to pass the
cookie through.
Use this when making the ipn state transition from Starting to
Running. This way a network of quiet nodes with no active
handshaking will still transition to Active.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
I noticed portlist when looking at some profiles and hadn't looked at
the code much before. This is a first pass over it. It allocates a
fair bit. More love remains, but this does a bit:
name old time/op new time/op delta
GetList-8 9.92ms ± 8% 9.64ms ±12% ~ (p=0.247 n=10+10)
name old alloc/op new alloc/op delta
GetList-8 931kB ± 0% 869kB ± 0% -6.70% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
GetList-8 4.59k ± 0% 3.69k ± 1% -19.71% (p=0.000 n=10+10)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This removes the need for go-cmp, which is extremely bloaty so we had
to leave it out of iOS. As a result, we had also left it out of macOS,
and so we didn't print netmap diffs at all on darwin-based platforms.
Oops.
As a bonus, the output format of the new function is way better.
Minor oddity: because I used the dumbest possible diff algorithm, the
sort order is a bit dumb. We print all "removed" lines and then print
all "added" lines, rather than doing the usual diff-like thing of
interspersing them. This probably doesn't matter (maybe it's an
improvement).
We weren't setting UsePacketFilter, so the synthetic ping packets
used to establish a connection were never being sent.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
* adds new packet "netcheck" to do the checking of UDP, IPv6, and
nearest DERP server, and the Report type for all that (and more
in the future, probably pulling in danderson's natprobe)
* new tailcfg.NetInfo type
* cmd/tailscale netcheck subcommand (tentative name, likely to
change/move) to print out the netcheck.Report.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prefs has become a heavy object with non-memcpy copy
semantics. We should not pass such a thing by value.
Signed-off-by: David Anderson <dave@natulte.net>
We can't rely on a frontend to provide a control
server URL, so this naturally belongs in server-persisted
state.
Signed-off-by: David Anderson <dave@natulte.net>
On unix, we want to provide a full path to the desired unix socket.
On windows, currently we want to provide a TCP port, but someday
we'll also provide a "path-ish" object for a named pipe.
For now, simplify the API down to exactly a path and a TCP port.
Signed-off-by: David Anderson <dave@natulte.net>
This is a prelude to supporting relaynode's --routes in
tailscaled. The daemon needs to remembers routes to
advertise, and the CLI needs to be able to change the
set of advertised routes. Prefs is the thing used for
both of these.
Signed-off-by: David Anderson <dave@natulte.net>
With this change, tailscaled can be restarted and reconnect
without interaction from `tailscale`, and `tailscale` is merely
there to provide login assistance and adjust preferences.
Signed-off-by: David Anderson <dave@natulte.net>
This test is skipped in tailscale/tailscale because it depends on
parts that haven't been released yet and was thus overlooked in the
git commit 79295b1138 cleanup.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was previously used by the MacOS client, but it now does
something different. ipnserver should never obey a client's
request to exit.
Signed-off-by: David Anderson <dave@natulte.net>
The store is passed-in by callers of NewLocalBackend and
ipnserver.Run, but currently all callers are hardcoded to
an in-memory store. The store is unused.
Signed-Off-By: David Anderson <dave@natulte.net>
This is a prelude to making it truly optional, once state
management has moved into the backend. For now though, it's
still required. This change is just isolating the bubbling-up
of the pointerification into other layers.
Signed-Off-By: David Anderson <dave@natulte.net>
- It was only used in one currently-unused client.
- It's an imperative command, not a configuration setting.
- The LoginFlags stuff in controlclient feels like it needs
a refactor anyway.
I'll put this logic back once ipnd owns its state and Backend
commands reflect that.
Signed-Off-By: David Anderson <dave@natulte.net>
The linter is strictly correct, but the code is structured
this way to avoid variable shadowing problems in the following
for loop. The context doesn't leak.
Staticcheck is correctly pointing out that this code is hard to
follow. However, this chunk of code is in service of enforcing
one frontend <> one backend, and we want to remove that limitation.
So, we'll just ignore the lint warning until this entire piece of
code goes away.
Signed-off-by: David Anderson <dave@natulte.net>
