With this change, the client can obtain the initial handshake message
separately from the rest of the handshake, for embedding into another
protocol. This enables things like RTT reduction by stuffing the
handshake initiation message into an HTTP header.
Similarly, the server API optionally accepts a pre-read Noise initiation
message, in addition to reading the message directly off a net.Conn.
Updates #3488
Signed-off-by: David Anderson <danderson@tailscale.com>
This test set the bar too high.
Just a couple of missed timers was enough to fail.
Change the test to more of a sanity check.
While we're here, run it for just 1s instead of 5s.
Prior to this change, on a 13" M1 MPB, with
stress -p 512 ./rate.test -test.run=QPS
I saw 90%+ failures.
After this change, I'm at 30k runs with no failures yet.
Fixes#3733
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Go 1.17 added a HandshakeContext func to take care of timeouts during
TLS handshaking, so switch from our homegrown goroutine implementation
to the standard way.
Signed-off-by: David Anderson <danderson@tailscale.com>
Cancelling the context makes the timeout goroutine race with the write that
reports a successful TLS handshake, so you can end up with a successful TLS
handshake that mysteriously reports that it timed out after ~0s in flight.
The context is always canceled and cleaned up as the function exits, which
happens mere microseconds later, so just let function exit clean up and
thereby avoid races.
Signed-off-by: David Anderson <danderson@tailscale.com>
This started as an attempt to placate GitHub's code scanner,
but it's also probably generally a good idea.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Turning this on at the beginning of the 1.21.x dev cycle, for 1.22.
Updates #150
Change-Id: I1de567cfe0be3df5227087de196ab88e60c9eb56
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The GitHub code scanner flagged this as a security vulnerability.
I don't believe it was, but I couldn't convince myself of it 100%.
Err on the safe side and use html/template to generate the HTML,
with all necessary escaping.
Fixestailscale/corp#2698
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
On Synology, the /etc/resolv.conf has tabs in it, which this
resolv.conf parser (we have two, sigh) didn't handle.
Updates #3710
Change-Id: I86f8e09ad1867ee32fa211e85c382a27191418ea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The --reset shouldn't imply that a Backend.Start is necessary. With
this, it can do a Backend.EditPrefs instead, which then doesn't do all
the heavy work that Start does. Also, Start on Windows behaves
slightly differently than Linux etc in some cases because of tailscaled
running in client mode on Windows (where the GUI supplies the prefs).
Fixes#3702
Change-Id: I75c9f08d5e0052bf623074030a3a7fcaa677abf6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Tailscale seems to be breaking WSL configurations lately. Until we
understand what changed, turn off Tailscale's involvement by default
and make it opt-in.
Updates #2815
Change-Id: I9977801f8debec7d489d97761f74000a4a33f71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
OpenBSD 6.9 and up has a daemon which handles nameserver configuration. This PR
teaches the OpenBSD dns manager to check if resolvd is being used. If it is, it
will use the route(8) command to tell resolvd to add the Tailscale dns entries
to resolv.conf
Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
The rest of our workflows use v2.1.4.
For reasons I do not understand, we must set GOPATH here.
Maybe the GitHub Action builds come with GOPATH already set?
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Except for the super verbose packet-level dumps. Keep those disabled
by default with a const.
Updates #2642
Change-Id: Ia9eae1677e8b3fe6f457a59e44896a335d95d547
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
From Maisem's code review feedback where he mashed the merge
button by mistake.
Change-Id: I55abce036a6c25dc391250514983125dda10126c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This code was copied in a few places (Windows, Android), so unify it
and add tests.
Change-Id: Id0510c0f5974761365a2045279d1fb498feca11e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The blockForeverConn was only using its sync.Cond one side. Looks like it
was just forgotten.
Fixes#3671
Change-Id: I4ed0191982cdd0bfd451f133139428a4fa48238c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Bigger changes coming later, but this should improve things a bit in
the meantime.
Rationale:
* 2 minutes -> 45 seconds: 2 minutes was overkill and never considered
phones/battery at the time. It was totally arbitrary. 45 seconds is
also arbitrary but is less than 2 minutes.
* heartbeat from 2 seconds to 3 seconds: in practice this meant two
packets per second (2 pings and 2 pongs every 2 seconds) because the
other side was also pinging us every 2 seconds on their own.
That's just overkill. (see #540 too)
So in the worst case before: when we sent a single packet (say: a DNS
packet), we ended up sending 61 packets over 2 minutes: the 1 DNS
query and then then 60 disco pings (2 minutes / 2 seconds) & received
the same (1 DNS response + 60 pongs). Now it's 15. In 1.22 we plan to
remove this whole timer-based heartbeat mechanism entirely.
The 5 seconds to 6.5 seconds change is just stretching out that
interval so you can still miss two heartbeats (other 3 + 3 seconds
would be greater than 5 seconds). This means that if your peer moves
without telling you, you can have a path out for 6.5 seconds
now instead of 5 seconds before disco finds a new one. That will also
improve in 1.22 when we start doing UDP+DERP at the same time
when confidence starts to go down on a UDP path.
Updates #3363
Change-Id: Ic2314bbdaf42edcdd7103014b775db9cf4facb47
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I apparently only did HTTP before, not HTTPS.
Updates tailscale/corp#1327
Change-Id: I7d5265a0a25fcab5b142c8c3f21a0920f6cae39f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixes#3660
RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled.
Change-Id: I001e983df5feeb65289abe5012dedd177b841b45
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
But still support hello.ipn.dev for a bit.
Updates tailscale/corp#1327
Change-Id: Iab59cca0b260d69858af16f4e42677e54f9fe54a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And delete the unused code in net/dns/resolver/neterr_*.go.
Change-Id: Ibe62c486bacce2733eb9968c96a98cbbdb2758bd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
