This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.
Updates #1634
Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This lets the control plane can make HTTP requests to nodes.
Then we can use this for future things rather than slapping more stuff
into MapResponse, etc.
Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also move KubeStore and MemStore into their own package.
RELNOTE: tsnet now supports providing a custom ipn.StateStore.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And log it when provided in map responses.
The test uses the date on which I joined Tailscale. :)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
testNodes have a reference to a testing.TB via their env.
Use it instead of making the caller pass theirs.
We did this in some methods but not others; finish the job.
This simplifies the call sites.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock was hanging onto its netmap on logout,
which caused tailscale status to display partial
information about a bunch of zombie peers.
After logout, there should be no peers.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
If you're using -verbose-tailscaled, you're doing in-the-weeds debugging,
so you probably want the verbose output.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The existing code relied on the Go build cache to avoid
needless work when obtaining the tailscale binaries.
For non-obvious reasons, the binaries were getting re-linked
every time, which added 600ms or so on my machine to every test.
Instead, build the binaries exactly once, on demand.
This reduces the time to run 'go test -count=5' from 34s to 10s
on my machine.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
fee2d9fad added support for cmd/tailscale to connect to IPNExtension.
It came in two parts: If no socket was provided, dial IPNExtension first,
and also, if dialing the socket failed, fall back to IPNExtension.
The second half of that support caused the integration tests to fail
when run on a machine that was also running IPNExtension.
The integration tests want to wait until the tailscaled instances
that they spun up are listening. They do that by dialing the new
instance. But when that dial failed, it was falling back to IPNExtension,
so it appeared (incorrectly) that tailscaled was running.
Hilarity predictably ensued.
If a user (or a test) explicitly provides a socket to dial,
it is a reasonable assumption that they have a specific tailscaled
in mind and don't want to fall back to IPNExtension.
It is certainly true of the integration tests.
Instead of adding a bool to Connect, split out the notion of a
connection strategy. For now, the implementation remains the same,
but with the details hidden a bit. Later, we can improve that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Filch doesn't like having multiple processes competing
for the same log files (#937).
Parallel integration tests were all using the same log files.
Add a TS_LOGS_DIR env var that the integration test can use
to use separate log files per test.
Fixes#2269
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The maximum unix domain socket path length on darwin is 104 bytes,
including the trailing NUL.
On my machine, the path created by some newly added tests (6eecf3c9)
was too long, resulting in cryptic test failures.
Shorten the names of the tests, and add a check to make
the diagnosis easier next time.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
With this, I can now:
* install Tailscale
* stop the GUI
* net stop Tailscale
* net start Tailscale
* tailscale up --unattended
(where the middle three steps simulate what would happen on a Windows
Server Core machine without a GUI)
Fixes#2137
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
Regression from 6d10655dc3, which added
UpdatePrefs but didn't write it out to disk.
I'd planned on adding tests to state_test.go which is why I'd earlier
added 46896a9311 to prepare for making
such persistence tests easier to write, but turns out state_test.go
didn't even test UpdatePrefs, so I'm staying out of there.
Instead, this is tested using integration tests.
Fixes#2321
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adapts the existing in-process logcatcher from tstest/integration
into a public type and uses it on the side of testcontrol. This also
fixes a bug in the Alpine Linux OpenRC unit that makes every value in
`/etc/default/tailscaled` exported into tailscaled's environment, a-la
systemd [Service].EnviromentFile.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
It was caching too aggressively, as it didn't see our deps due to our
running "go install tailscaled" as a child process.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously this test would reach out to the public DERP servers in order
to help machines connect with eachother. This is not ideal given our
plans to run these tests completely disconnected from the internet. This
patch introduces an in-process DERP server running on its own randomly
assigned HTTP port.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Failing often now, we don't want people to get used to
routinely ignoring test failures.
Can be re-enabled when
https://github.com/tailscale/tailscale/issues/2079
is resolved.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
This fails pretty reliably with a lot of output now showing what's
happening:
TS_DEBUG_MAP=1 go test --failfast -v -run=Ping -race -count=20 ./tstest/integration --verbose-tailscaled
I haven't dug into the details yet, though.
Updates #2079
Instead of pulling packages from pkgs.tailscale.com, we should use the
tailscale binaries that are local to this git commit. This exposes a bit
of the integration testing stack in order to copy the binaries
correctly.
This commit also bumps our version of github.com/pkg/sftp to the latest
commit.
If you run into trouble with yaml, be sure to check out the
commented-out alpine linux image complete with instructions on how to
use it.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
* Added new Addresses / AllowedIPs fields to testcontrol when creating new &tailcfg.Node
Signed-off-by: Simeng He <simeng@tailscale.com>
* Added single node test to check Addresses and AllowedIPs
Signed-off-by: Simeng He <simeng@tailscale.com>
Co-authored-by: Simeng He <simeng@tailscale.com>
