So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
stunstamp now sends data to Prometheus via remote write, and Prometheus
can serve the same data. Retaining and cleaning up old data in sqlite
leads to long probing pauses, and it's not worth investing more effort
to optimize the schema and/or concurrency model.
Updates tailscale/corp#20344
Signed-off-by: Jordan Whited <jordan@tailscale.com>
PeerPresentFlags was added in 5ffb2668ef but wasn't plumbed through to
the RunConnectionLoop. Rather than add yet another parameter (as
IP:port was added earlier), pass in the raw PeerPresentMessage and
PeerGoneMessage struct values, which are the same things, plus two
fields: PeerGoneReasonType for gone and the PeerPresentFlags from
5ffb2668ef.
Updates tailscale/corp#17816
Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the store-appc-routes flag is on for a tailnet we are writing the
routes more often than seems necessary. Investigation reveals that we
are doing so ~every time we observe a dns response, even if this causes
us not to advertise any new routes. So when we have no new routes,
instead do not advertise routes.
Fixes#12593
Signed-off-by: Fran Bull <fran@tailscale.com>
I couldn't convince myself the old way was safe and couldn't lose
writes.
And it seemed too complicated.
Updates tailscale/corp#21104
Change-Id: I17ba7c7d6fd83458a311ac671146a1f6a458a5c1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
sendMeshUpdates tries to write as much as possible without blocking,
being careful to check the bufio.Writer.Available size before writes.
Except that regressed in 6c791f7d60 which made those messages larger, which
meants we were doing network I/O with the Server mutex held.
Updates tailscale/corp#13945
Change-Id: Ic327071d2e37de262931b9b390cae32084811919
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds the ability to "peek" at the value of a SyncValue, so that
it's possible to observe a value without computing this.
Updates tailscale/corp#17122
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I06f88c22a1f7ffcbc7ff82946335356bb0ef4622
This is implemented via GetBestInterfaceEx. Should we encounter errors
or fail to resolve a valid, non-Tailscale interface, we fall back to
returning the index for the default interface instead.
Fixes#12551
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Timeouts could already be identified as NaN values on
stunstamp_derp_stun_rtt_ns, but we can't use NaN effectively with
promql to visualize them. So, this commit adds a timeouts metric that
we can use with rate/delta/etc promql functions.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Changes "Accept" TCP logs to display in verbose logs only,
and removes lines from default logging behavior.
Updates #12158
Signed-off-by: Keli Velazquez <keli@tailscale.com>
This allows the SSH_AUTH_SOCK environment variable to work inside of
su and agent forwarding to succeed.
Fixes#12467
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This actually performs a Noise request in the 'debug ts2021' command,
instead of just exiting once we've dialed a connection. This can help
debug certain forms of captive portals and deep packet inspection that
will allow a connection, but will RST the connection when trying to send
data on the post-upgraded TCP connection.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18
So that it can be later used in the 'tailscale debug ts2021' function in
the CLI, to aid in debugging captive portals/WAFs/etc.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iec9423f5e7570f2c2c8218d27fc0902137e73909
Fix regression from bd93c3067e where I didn't notice the
32-bit test failure was real and not its usual slowness-related
regression. Yay failure blindness.
Updates #12526
Change-Id: I00e33bba697e2cdb61a0d76a71b62406f6c2eeb9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Looks like a DERPmap might not be available when we try to get the
name associated with a region ID, and that was causing an intermittent
panic in CI.
Fixes#12534
Change-Id: I4ace53681bf004df46c728cff830b27339254243
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
It was hex-ifying the String() form of key.NodePublic, which was already hex.
I noticed in some logs:
"client 6e6f64656b65793a353537353..."
And thought that 6x6x6x6x looked strange. It's "nodekey:" in hex.
Updates tailscale/corp#20844
Change-Id: Ib9f2d63b37e324420b86efaa680668a9b807e465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I meant to do this in the earlier change and had a git fail.
To atone, add a test too while I'm here.
Updates #12486
Updates #12507
Change-Id: I4943b454a2530cb5047636f37136aa2898d2ffc7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#20971
We added some Warnables for DERP failure situations, but their Text currently spits out the DERP region ID ("10") in the UI, which is super ugly. It would be better to provide the RegionName of the DERP region that is failing. We can do so by storing a reference to the last-known DERP map in the health package whenever we fetch one, and using it when generating the notification text.
This way, the following message...
> Tailscale could not connect to the relay server '10'. The server might be temporarily unavailable, or your Internet connection might be down.
becomes:
> Tailscale could not connect to the 'Seattle' relay server. The server might be temporarily unavailable, or your Internet connection might be down.
which is a lot more user-friendly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/corp#20969
Right now, when netcheck starts, it asks tailscaled for a copy of the DERPMap. If it doesn't have one, it makes a HTTPS request to controlplane.tailscale.com to fetch one.
This will always fail if you're on a network with a captive portal actively blocking HTTPS traffic. The code appears to hang entirely because the http.Client doesn't have a Timeout set. It just sits there waiting until the request succeeds or fails.
This adds a timeout of 10 seconds, and logs more details about the status of the HTTPS request.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This is useful during maintenance as a method for shedding home client
load.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Updates #4136
Small PR to expose the health Warnables dependencies to the GUI via LocalAPI, so that we can only show warnings for root cause issues, and filter out unnecessary messages before user presentation.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
I noticed we were allocating these every time when they could just
share the same memory. Rather than document ownership, just lock it
down with a view.
I was considering doing all of the fields but decided to just do this
one first as test to see how infectious it became. Conclusion: not
very.
Updates #cleanup (while working towards tailscale/corp#20514)
Change-Id: I8ce08519de0c9a53f20292adfbecd970fe362de0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
We need to expand our enviornment information to include info about
the Windows store. Thinking about future plans, it would be nice
to include both the packaging mechanism and the distribution mechanism.
In this PR we change packageTypeWindows to check a new registry value
named MSIDist, and concatenate that value to "msi/" when present.
We also remove vestigial NSIS detection.
Updates https://github.com/tailscale/corp/issues/2790
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The Add method derives a new ID by adding a signed integer
to the ID, treating it as an unsigned 256-bit big-endian integer.
We also add Less and Compare methods to PrivateID to provide
feature parity with existing methods on PublicID.
Updates tailscale/corp#11038
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
validate_udp_checksum was previously indeterminate (not zero) at
declaration, and IPv4 zero value UDP checksum packets were being passed
to the kernel.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
* cmd/containerboot: store device ID before setting up proxy routes.
For containerboot instances whose state needs to be stored
in a Kubernetes Secret, we additonally store the device's
ID, FQDN and IPs.
This is used, between other, by the Kubernetes operator,
who uses the ID to delete the device when resources need
cleaning up and writes the FQDN and IPs on various kube
resource statuses for visibility.
This change shifts storing device ID earlier in the proxy setup flow,
to ensure that if proxy routing setup fails,
the device can still be deleted.
Updates tailscale/tailscale#12146
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* code review feedback
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We do not support specific version updates or track switching on macOS.
Do not populate the flag to avoid confusion.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, we would only compare the current version to resolved latest
version for track. When running `tailscale update --track=stable` from
an unstable build, it would almost always fail because the stable
version is "older". But we should support explicitly switching tracks
like that.
Fixes#12347
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
For pprof cosmetic/confusion reasons more than performance, but it
might have tiny speed benefit.
Updates #12486
Change-Id: I40e03714f3afa3a7e7f5e1fa99b81c7e889b91b6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So profiles show more useful names than just func1, func2, func3, etc.
There will still be func1 on them all, but the symbol before will say
what the lookup type is.
Updates #12486
Change-Id: I910b024a7861394eb83d07f5a899eae338cb1f22
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
