That way humans don't have to remember which is correct.
RELNOTE=--auth-key is the new --authkey, but --authkey still works
Updates tailscale/corp#3486
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Still largely incomplete, but in a better home now.
Updates #3802
Change-Id: I46c5ffdeb12e306879af801b06266839157bc624
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I was about to add a third copy, so unify them now instead.
Change-Id: I3b93896aa1249b1250a6b1df4829d57717f2311a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The commit b9c92b90db earlier today
caused a regression of serving an empty map always, as it was
JSON marshalling an atomic.Value instead of the DNS entries map
it just built.
Change-Id: I9da3eeca132c6324462dedeaa7d002908557384b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Didn't help enough. We are setting another header anyway. Restore it.
This reverts commit 60abeb027b.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
No one really cares. Its cost outweighs its usefulness.
name old time/op new time/op delta
HandleBootstrapDNS-10 105ns ± 4% 65ns ± 2% -37.68% (p=0.000 n=15+14)
name old alloc/op new alloc/op delta
HandleBootstrapDNS-10 416B ± 0% 0B -100.00% (p=0.000 n=15+15)
name old allocs/op new allocs/op delta
HandleBootstrapDNS-10 3.00 ± 0% 0.00 -100.00% (p=0.000 n=15+15)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Do json formatting once, rather than on every request.
Use an atomic.Value.
name old time/op new time/op delta
HandleBootstrapDNS-10 6.35µs ± 0% 0.10µs ± 4% -98.35% (p=0.000 n=14+15)
name old alloc/op new alloc/op delta
HandleBootstrapDNS-10 3.20kB ± 0% 0.42kB ± 0% -86.99% (p=0.000 n=12+15)
name old allocs/op new allocs/op delta
HandleBootstrapDNS-10 41.0 ± 0% 3.0 ± 0% -92.68% (p=0.000 n=15+15)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
A large influx of new connections can bring down DERP
since it spins off a new goroutine for each connection,
where each routine may do significant amount of work
(e.g., allocating memory and crunching numbers for TLS crypto).
The momentary spike can cause the process to OOM.
This commit sets the groundwork for limiting connections,
but leaves the limit at infinite by default.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This patch adds new functions to be used when accessing system policies,
and revises callers to use the new functions. They first attempt the new
registry path for policies, and if that fails, attempt to fall back to the
legacy path.
We keep non-policy variants of these functions because we should be able to
retain the ability to read settings from locations that are not exposed to
sysadmins for group policy edits.
The remaining changes will be done in corp.
Updates https://github.com/tailscale/tailscale/issues/3584
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Also fix a somewhat related printing bug in the process where
some paths would print "Success." inconsistently even
when there otherwise was no output (in the EditPrefs path)
Fixes#3830
Updates #3702 (which broke it once while trying to fix it)
Change-Id: Ic51e14526ad75be61ba00084670aa6a98221daa5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.
This is that experiment.
Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)
Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So Linux/etc CLI users get helpful advice to run tailscale
with --operator=$USER when they try to 'tailscale file {cp,get}'
but are mysteriously forbidden.
Signed-off-by: David Eger <eger@google.com>
Signed-off-by: David Eger <david.eger@gmail.com>
Disabled by default.
To use, run tailscaled with:
TS_SSH_ALLOW_LOGIN=you@bar.com
And enable with:
$ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true
Then ssh [any-user]@[your-tailscale-ip] for a root bash shell.
(both the "root" and "bash" part are temporary)
Updates #3802
Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Surveying the fleet prior to turning off old/unused/insecure
TLS versions.
Updates tailscale/corp#3615
Signed-off-by: David Anderson <danderson@tailscale.com>
The GitHub code scanner flagged this as a security vulnerability.
I don't believe it was, but I couldn't convince myself of it 100%.
Err on the safe side and use html/template to generate the HTML,
with all necessary escaping.
Fixestailscale/corp#2698
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The --reset shouldn't imply that a Backend.Start is necessary. With
this, it can do a Backend.EditPrefs instead, which then doesn't do all
the heavy work that Start does. Also, Start on Windows behaves
slightly differently than Linux etc in some cases because of tailscaled
running in client mode on Windows (where the GUI supplies the prefs).
Fixes#3702
Change-Id: I75c9f08d5e0052bf623074030a3a7fcaa677abf6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I apparently only did HTTP before, not HTTPS.
Updates tailscale/corp#1327
Change-Id: I7d5265a0a25fcab5b142c8c3f21a0920f6cae39f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
But still support hello.ipn.dev for a bit.
Updates tailscale/corp#1327
Change-Id: Iab59cca0b260d69858af16f4e42677e54f9fe54a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Treat UDP send EPERM errors as a lost UDP packet, not something super
fatal. That's just the Linux firewall preventing it from going out.
And add a leaf package net/neterror for that (and future) policy that
all three packages can share, with tests.
Updates #3619
Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is for use by the Windows GUI client to log via when an
exit node is in use, so the logs don't go out via the exit node and
instead go directly, like tailscaled's. The dialer tried to do that
in the unprivileged GUI by binding to a specific interface, but the
"Internet Kill Switch" installed by tailscaled for exit nodes
precludes that from working and instead the GUI fails to dial out.
So, go through tailscaled (with a CONNECT request) instead.
Fixestailscale/corp#3169
Change-Id: I17a8efdc1d4b8fed53a29d1c19995592b651b215
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves the Windows-only initialization of the filelogger into
logpolicy. Previously we only did it when babysitting the tailscaled
subprocess, but this meant that log messages from the service itself
never made it to disk. Examples that weren't logged to disk:
* logtail unable to dial out,
* DNS flush messages from the service
* svc.ChangeRequest messages (#3581)
This is basically the same fix as #3571 but staying in the Logf type,
and avoiding build-tagged file (which wasn't quite a goal, but
happened and seemed nice)
Fixes#3570
Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Change-Id: Iacd80c4720b7218365ec80ae143339d030842702
I broke it in 1.17.x sometime while rewiring some logs stuff,
mostly in 0653efb092 (but with a handful
of logs-related changes around that time)
Fixestailscale/corp#3265
Change-Id: Icb5c07412dc6d55f1d9244c5d0b51dceca6a7e34
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
One of the most annoying parts of using the Tailscale CLI on Windows
and the macOS GUI is that Tailscale's GUIs default to running with
"Route All" (accept all non-exitnode subnet routes) but the CLI--being
originally for Linux--uses the Linux default, which is to not accept
subnets.
Which means if a Windows user does, e.g.:
tailscale up --advertise-exit-node
Or:
tailscale up --shields-up
... then it'd warn about reverting the --accept-routes option, which the user
never explicitly used.
Instead, make the CLI's default match the platform/GUI's default.
Change-Id: I15c804b3d9b0266e9ca8651e0c09da0f96c9ef8d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
fee2d9fad added support for cmd/tailscale to connect to IPNExtension.
It came in two parts: If no socket was provided, dial IPNExtension first,
and also, if dialing the socket failed, fall back to IPNExtension.
The second half of that support caused the integration tests to fail
when run on a machine that was also running IPNExtension.
The integration tests want to wait until the tailscaled instances
that they spun up are listening. They do that by dialing the new
instance. But when that dial failed, it was falling back to IPNExtension,
so it appeared (incorrectly) that tailscaled was running.
Hilarity predictably ensued.
If a user (or a test) explicitly provides a socket to dial,
it is a reasonable assumption that they have a specific tailscaled
in mind and don't want to fall back to IPNExtension.
It is certainly true of the integration tests.
Instead of adding a bool to Connect, split out the notion of a
connection strategy. For now, the implementation remains the same,
but with the details hidden a bit. Later, we can improve that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This is enough to handle the DNS queries as generated by Go's
net package (which our HTTP/SOCKS client uses), and the responses
generated by the ExitDNS DoH server.
This isn't yet suitable for putting on 100.100.100.100 where a number
of different DNS clients would hit it, as this doesn't yet do
EDNS0. It might work, but it's untested and likely incomplete.
Likewise, this doesn't handle anything about truncation, as the
exchanges are entirely in memory between Go or DoH. That would also
need to be handled later, if/when it's hooked up to 100.100.100.100.
Updates #3507
Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The caller of func run said:
// No need to log; the func already did
But that wasn't true. Some return paths didn't log.
So instead, return rich errors and have func main do the logging,
so we can't miss anything in the future.
Prior to this, safesocket.Listen for instance was causing tailscaled
to os.Exit(1) on failure without any clue as to why.
Change-Id: I9d71cc4d73d0fed4aa1b1902cae199f584f25793
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
