set.Of(1, 2, 3) is prettier than set.SetOf([]int{1, 2, 3}).
I was going to change the signature of SetOf but then I noticed its
name has stutter anyway, so I kept it for compatibility. People can
prefer to use set.Of for new code or slowly migrate.
Also add a lazy Make method, which I often find myself wanting,
without having to resort to uglier mak.Set(&set, k, struct{}{}).
Updates #cleanup
Change-Id: Ic6f3870115334efcbd65e79c437de2ad3edb7625
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The inflight request tracker only starts recording a new bucket after
the first non-error request. Unfortunately, it's written in such a way
that ONLY successful requests are ever marked as being finished. Once a
bucket has had at least one successful request and begun to be tracked,
all subsequent error cases are never marked finished and always appear
as in-flight.
This change ensures that if a request is recorded has having been
started, we also mark it as finished at the end.
Updates tailscale/corp#19767
Signed-off-by: Will Norris <will@tailscale.com>
Setting the field after-the-fact wasn't working because we could migrate
prefs on creation, which would set health status for auto updates.
Updates #11986
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I41d79ebd61d64829a3a9e70586ce56f62d24ccfd
While debugging a failing test in airplane mode on macOS, I noticed
netcheck logspam about ICMP socket creation permission denied errors.
Apparently macOS just can't do those, or at least not in airplane
mode. Not worth spamming about.
Updates #cleanup
Change-Id: I302620cfd3c8eabb25202d7eef040c01bd8a843c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The netcheck client, when no UDP is available, probes distance using
HTTPS.
Several problems:
* It probes using /derp/latency-check.
* But cmd/derper serves the handler at /derp/probe
* Despite the difference, it work by accident until c8f4dfc8c0
which made netcheck's probe require a 2xx status code.
* in tests, we only use derphttp.Handler, so the cmd/derper-installed
mux routes aren't preesnt, so there's no probe. That breaks
tests in airplane mode. netcheck.Client then reports "unexpected
HTTP status 426" (Upgrade Required)
This makes derp handle both /derp/probe and /derp/latency-check
equivalently, and in both cmd/derper and derphttp.Handler standalone
modes.
I notice this when wgengine/magicsock TestActiveDiscovery was failing
in airplane mode (no wifi). It still doesn't pass, but it gets
further.
Fixes#11989
Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f
Not buying wifi on a short flight is a good way to find tests
that require network. Whoops.
Updates #cleanup
Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for it being required in more places.
Updates #11874
Change-Id: Ib743205fc2a6c6ff3d2c4ed3a2b28cac79156539
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This prevents Mark-of-the-Web bypass attacks in case someone visits the
localhost WebDAV server directly.
Fixestailscale/corp#19592
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This prevents Mark-of-the-Web bypass attacks in case someone visits the
localhost WebDAV server directly.
Fixestailscale/corp#19592
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This prevents Mark-of-the-Web bypass attacks in case someone visits the
localhost WebDAV server directly.
Fixestailscale/corp#19592
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This prevents Mark-of-the-Web bypass attacks in case someone visits the
localhost WebDAV server directly.
Fixestailscale/corp#19592
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This prevents Mark-of-the-Web bypass attacks in case someone visits the
localhost WebDAV server directly.
Fixestailscale/corp#19592
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This prevents Mark-of-the-Web bypass attacks in case someone visits the
localhost WebDAV server directly.
Fixestailscale/corp#19592
Signed-off-by: Percy Wegmann <percy@tailscale.com>
To aid in debugging exactly what's going wrong, instead of the
not-particularly-useful "dns udp query: context deadline exceeded" error
that we currently get.
Updates #3786
Updates #10768
Updates #11620
(etc.)
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76334bf0681a8a2c72c90700f636c4174931432c
cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies.
This commit adds functionality to automatically populate
DNS records for the in-cluster ts.net nameserver
to allow cluster workloads to resolve MagicDNS names
associated with operator's proxies.
The records are created as follows:
* For tailscale Ingress proxies there will be
a record mapping the MagicDNS name of the Ingress
device and each proxy Pod's IP address.
* For cluster egress proxies, configured via
tailscale.com/tailnet-fqdn annotation, there will be
a record for each proxy Pod, mapping
the MagicDNS name of the exposed
tailnet workload to the proxy Pod's IP.
No records will be created for any other proxy types.
Records will only be created if users have configured
the operator to deploy an in-cluster ts.net nameserver
by applying tailscale.com/v1alpha1.DNSConfig.
It is user's responsibility to add the ts.net nameserver
as a stub nameserver for ts.net DNS names.
https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-corednshttps://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers
See also https://github.com/tailscale/tailscale/pull/11017
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It's deprecated and using it gets us the old slow behavior
according to https://go.dev/blog/randv2.
> Having eliminated repeatability of the global output stream, Go 1.20
> was also able to make the global generator scale better in programs
> that don’t call rand.Seed, replacing the Go 1 generator with a very
> cheap per-thread wyrand generator already used inside the Go
> runtime. This removed the global mutex and made the top-level
> functions scale much better. Programs that do call rand.Seed fall
> back to the mutex-protected Go 1 generator.
Updates #7123
Change-Id: Ia5452e66bd16b5457d4b1c290a59294545e13291
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In prep for making health warnings rich objects with metadata rather
than a bunch of strings, start moving it all into the same place.
We'll still ultimately need the stringified form for the CLI and
LocalAPI for compatibility but we'll next convert all these warnings
into Warnables that have severity levels and such, and legacy
stringification will just be something each Warnable thing can do.
Updates #4136
Change-Id: I83e189435daae3664135ed53c98627c66e9e53da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So that we can use this for additional, non-NAT configuration without it
being confusing.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1658d59c9824217917a94ee76d2d08f0a682986f
This was a holdover from the older, pre-BART days and is no longer
necessary.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I71b892bab1898077767b9ff51cef33d59c08faf8
Updates tailscale/corp#18960
Tests in corp called us using the wrong logging calls. Removed.
This is logged downstream anyway.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This configures localClient correctly during flag parsing, so that the --socket
option is effective when generating tab-completion results. For example, the
following would not connect to the system Tailscale for tab-completion results:
tailscale --socket=/tmp/tailscaled.socket switch <TAB>
Updates #3793
Signed-off-by: Paul Scott <paul@tailscale.com>
Updates tailscale/corp#18960
iOS uses Apple's NetworkMonitor to track the default interface and
there's no reason we shouldn't also use this on macOS, for the same
reasons noted in the comments for why this change was made on iOS.
This eliminates the need to load and parse the routing table when
querying the defaultRouter() in almost all cases.
A slight modification here (on both platforms) to fallback to the default
BSD logic in the unhappy-path rather than making assumptions that
may not hold. If netmon is eventually parsing AF_ROUTE and able
to give a consistently correct answer for the default interface index,
we can fall back to that and eliminate the Swift dependency.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values.
Fixes#11947
Signed-off-by: Gabe Gorelick <gabe@hightouch.io>
We had this in a different repo, but moving it here, as this a more
fitting package.
Updates #cleanup
Change-Id: I5fb9b10e465932aeef5841c67deba4d77d473d57
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also, reset it in a few more places (e.g. logout, new blank profiles,
etc.) to avoid a few more cases where a pre-existing dialPlan can cause
a new Headscale server take 10+ seconds to connect.
Updates #11938
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I3095173a5a3d9720507afe4452548491e9e45a3e
If AtomicValue[T] is used with a T that is an interface kind,
then Store may panic if different concret types are ever stored.
Fix this by always wrapping in a concrete type.
Technically, this is only needed if T is an interface kind,
but there is no harm in doing it also for non-interface kinds.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
