Due to the Sparkle preference naming convention, macsys already has a
policy key named "ApplyUpdates" that merely shows or hides the menu
item that controls if auto updates are installed, rather than directly
controlling the setting.
For other platforms, we are going to use "InstallUpdates" instead
because it seemed better than the other options that were considered.
Updates ENG-2127
Updates tailscale/corp#16247
Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for enforcing exit node LAN access, DNS and subnet
routes.
Adding new preference policies was getting repetitive, so this turns
some of the boilerplate into a table.
Updates tailscale/corp#15585
Updates ENG-2240
Change-Id: Iabd3c42b0ae120b3145fac066c5caa7fc4d67824
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Remove padding on top of search bar, remove rounded corners of
bottom border of earch bar, and add auto focus.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously, policies affected the default prefs for a new profile, but
that does not affect existing profiles. This change ensures that
policies are applied whenever preferences are loaded or changed, so a
CLI or GUI client that does not respect the policies will still be
overridden.
Exit node IP is dropped from this PR as it was implemented elsewhere
in #10172.
Fixestailscale/corp#15585
Change-Id: Ide4c3a4b00a64e43f506fa1fab70ef591407663f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Adds a footer to the device details page that mirrors license and
policy content on other Tailscale clients.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add workflow to run yarn lint/test/format-check against the web
client on pull requests.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The IP property in node data was renamed to IPv4 but refactoring the usage
of the property was missed in this file.
Updates https://github.com/tailscale/tailscale/issues/10261
Signed-off-by: Mario Minardi <mario@tailscale.com>
Unfortunately in the test we can't reproduce the failure seen
in the real system ("SOAP fault: UPnPError")
Updates https://github.com/tailscale/tailscale/issues/8364
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
* util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux
Updates #9084.
Currently, we have to tell users to manually open UDP ports on Linux when
certain firewalls (like ufw) are enabled. This change automates the process of
adding and updating those firewall rules as magicsock changes what port it
listens on.
Signed-off-by: Naman Sood <mail@nsood.in>
Updates the IP address on home view to open a copyable list of node
addresses on click. And makes various values on the details view
copyable text items, mirroring the machine admin panel table.
As part of these changes, pulls the AddressCard, NiceIP and QuickCopy
components from the admin panel, with the AddressCard slightly modified
to avoid needing to also pull in the CommandLine component.
A new toaster interface is also added, allowing us to display success
and failure toasts throughout the UI. The toaster code is slightly
modified from it's admin form to avoid the need for some excess
libraries.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This will enable the runner to be replaced as a configuration side
effect in a later change.
Updates tailscale/corp#14029
Signed-off-by: James Tucker <james@tailscale.com>
These keys were intended to match the Apple platforms, but accidentally
used the wrong name.
Updates ENG-2133
Change-Id: I9ed7a17919e34e2d8896a5c64efc4d0c0003166e
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Add left and right padding around entire client so that the cards don't
run into the side of the screen. Also tighten up vertical spacing in
couple of places.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Before this fix, LikelyHomeRouterIP could return a 'self' IP that
doesn't correspond to the gateway address, since it picks the first
private address when iterating over the set interfaces as the 'self' IP,
without checking that the address corresponds with the
previously-detected gateway.
This behaviour was introduced by accident in aaf2df7, where we deleted
the following code:
for _, prefix := range privatev4s {
if prefix.Contains(gateway) && prefix.Contains(ip) {
myIP = ip
ok = true
return
}
}
Other than checking that 'gateway' and 'ip' were private IP addresses
(which were correctly replaced with a call to the netip.Addr.IsPrivate
method), it also implicitly checked that both 'gateway' and 'ip' were a
part of the *same* prefix, and thus likely to be the same interface.
Restore that behaviour by explicitly checking pfx.Contains(gateway),
which, given that the 'ip' variable is derived from our prefix 'pfx',
ensures that the 'self' IP will correspond to the returned 'gateway'.
Fixes#10466
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iddd2ee70cefb9fb40071986fefeace9ca2441ee6
Add metric logging logic for the web client frontend. This is an initial
pass of adding the base logic, plus a single point where it is used for
validation that the logging is working correctly. More metric logging
calls will follow in subsquent PRs.
Updates https://github.com/tailscale/tailscale/issues/10261
Signed-off-by: Mario Minardi <mario@tailscale.com>
If the login client is inside an iframe, open the management client in a
new window, since it can't be loaded in the frame.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
If the currently selected exit node is offline, render the exit node
selector in red with an error message. Update exit nodes in the dropdown
to indicate if they are offline, and don't allow them to be selected.
This also updates some older color values to use the new colors.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Makes the following changes:
* Use “link” class in various spots
* Remove button appearance on Exit Node dropdown in readonly mode
* Update `-stone-` colors to `-gray-` (couple spots missed by
original color config commit)
* Pull full ui/button component from admin panel, and update
buttons throughout UI to use this component
* Remove various buttons in readonly view to match mocks
* Add route (and “pending approval”) highlights to Subnet router
settings card
* Delete legacy client button styles from index.css
* Fix overflow of IPv6 address on device details view
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* cmd/k8s-operator: generate static manifests from Helm charts
This is done to ensure that there is a single source of truth
for the operator kube manifests.
Also adds linux node selector to the static manifests as
this was added as a default to the Helm chart.
Static manifests can now be generated by running
`go generate tailscale.com/cmd/k8s-operator`.
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
For use in ACL tests, we need a way to check whether a packet is allowed
not just with TCP, but any protocol.
Updates #3561
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Use the packet filter rules to determine if any device is allowed to
connect on port 5252. This does not check whether a specific device can
connect (since we typically don't know the source device when this is
used). Nor does it specifically check for wide-open ACLs, which is
something we may provide a warning about in the future.
Update the login popover content to display information when the src
device is unable to connect to the dst device over its Tailscale IP. If
we know it's an ACL issue, mention that, otherwise list a couple of
things to check. In both cases, link to a placeholder URL to get more
information about web client connection issues.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
This PR is all about adding functionality that will enable the installer's
upgrade sequence to terminate processes belonging to the previous version,
and then subsequently restart instances belonging to the new version within
the session(s) corresponding to the processes that were killed.
There are multiple parts to this:
* We add support for the Restart Manager APIs, which allow us to query the
OS for a list of processes locking specific files;
* We add the RestartableProcess and RestartableProcesses types that query
additional information about the running processes that will allow us
to correctly restart them in the future. These types also provide the
ability to terminate the processes.
* We add the StartProcessInSession family of APIs that permit us to create
new processes within specific sessions. This is needed in order to
properly attach a new GUI process to the same RDP session and desktop that
its previously-terminated counterpart would have been running in.
* I tweaked the winutil token APIs again.
* A lot of this stuff is pretty hard to test without a very elaborate
harness, but I added a unit test for the most complicated part (though it
requires LocalSystem to run).
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
When updating on Windows, we make a copy of the tailscale.exe file in a
temp directory to perform the update, because the original tailscale.exe
gets deleted during the update.
This can eat up disk space if a machine is stuck doing repeated failed
update attempts. Clean up old copies explicitly before making a new one,
same as we do with MSIs.
Updates #10082
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The recent addition of RequestID was only populated if the
HTTP Request had returned an error. This meant that the underlying
handler has no access to this request id and any logs it may have
emitted were impossible to correlate to that request id. Therefore,
this PR adds a middleware to generate request ids and pass them
through the request context. The tsweb.StdHandler automatically
populates this request id if the middleware is being used. Finally,
inner handlers can use the context to retrieve that same request id
and use it so that all logs and events can be correlated.
Updates #2549
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
