The c2n part was broken because we were not looking up the tailscale
binary for that GOOS. The rest of the update was failing at the `pkg
upgrade` confirmation prompt. We also need to manually restart
tailscaled after update.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Check for root early, before we fetch the pkgs index. This avoids
several seconds delay for the command to tell you to sudo.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In case there's a wild symlink in one of the target paths, we don't want
to accidentally delete too much. Limit `cleanupOldDownloads` to deleting
individual files only.
Updates https://github.com/tailscale/tailscale/issues/10082
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
After we're done installing, clean up the temp files. This prevents temp
volumes from filling up on hosts that don't reboot often.
Fixes https://github.com/tailscale/tailscale/issues/10082
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Not all users know about our tracks and versioning scheme. They can be
confused when e.g. 1.52.0 is out but 1.53.0 is available. Or when 1.52.0
is our but 1.53 has not been built yet and user is on 1.51.x.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On `tailscale set --auto-update`, set the Sparkle plist option for it.
Also make macsys report not supporting auto-updates over c2n, since they
will be triggered by Sparkle locally.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
When updating via c2n, `tailscale.exe update` runs from `tailscaled.exe`
which runs as SYSTEM. The MSI installer does not start the GUI when
running as SYSTEM. This results in Tailscale just existing on
auto-update, which is ungood.
Instead, always ask the MSI installer to not launch the GUI (via
`TS_NOLAUNCH` argument) and launch it manually with a token from the
current logged in user. The token code was borrowed from
d9081d6ba2/net/dns/wsl_windows.go (L207-L232)
Also, make some logging changes so that these issues are easier to debug
in the future.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In the sandboxed app from the app store, we cannot check
`/Library/Preferences/com.apple.commerce.plist` or run `softwareupdate`.
We can at most print a helpful message and open the app store page.
Also, reenable macsys update function to mark it as supporting c2n
updates. macsys support in `tailscale update` was fixed.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Two bug fixes:
1. when tailscale update is executed as root, `os.UserCacheDir` may
return an error because `$XDG_CACHE_HOME` and `$HOME` are not set;
fallback to `os.TempDir` in those cases
2. on some weird distros (like my EndeavourOS), `/usr/sbin` is just a
symlink to `/usr/bin`; when we resolve `tailscale` binary path from
`tailscaled`, allow `tailscaled` to be in either directory
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The Sparkle-based update is not quite working yet. Make `NewUpdater`
return `ErrUnsupported` for it to avoid the proliferation of exceptions
up the stack.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This is only relevant for unstable releases and local builds. When local
version is newer than upstream, abort release.
Also, re-add missing newlines in output that were missed in
https://github.com/tailscale/tailscale/pull/9694.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In case cli.Stdout/Stderr get overriden, all CLI output should use them
instead of os.Stdout/Stderr. Update the `update` command to follow this
pattern.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
DSM6 does not automatically restart packages on install, we have to do
it explicitly.
Also, DSM6 has a filter for publishers in Package Center. Make the error
message more helpful when update fails because of this filter not
allowing our package.
Fixes#9361
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Log some progress info to make updates more debuggable. Also, track
whether an active update is already started and return an error if
a concurrent update is attempted.
Some planned future PRs:
* add JSON output to `tailscale update`
* use JSON output from `tailscale update` to provide a more detailed
status of in-progress update (stage, download progress, etc)
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Our build system caches files locally and only updates them when something
changes. Since I need to integrate some distsign stuff into the build system
to validate our Windows 7 MSIs, I want to be able to check the cached copy
of a package before downloading a fresh copy from pkgs.
If the signature changes, then obviously the local copy is outdated and we
return an error, at which point we call Download to refresh the package.
Updates https://github.com/tailscale/corp/issues/14334
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Replace %w verb with %v verb when logging errors.
Use %w only for wrapping errors with fmt.Errorf()
Fixes: #9213
Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>
As a fallback to package managers, allow updating tailscale that was
self-installed in some way. There are some tricky bits around updating
the systemd unit (should we stick to local binary paths or to the ones
in tailscaled.service?), so leaving that out for now.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On linux users can install Tailscale via package managers or direct
tarball downloads. Detect when Tailscale is not installed via a package
manager so we can pick the correct update mechanism. Leave the tarball
update function unimplemented for now (coming in next PR!).
Updates #6995
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Top-level Version in pkgs response is not always in sync with SPK
versions, especially on unstable track. It's very confusing when the
confirmation prompt asks you "update to 1.49.x?" and you end up updating
to 1.49.y.
Instead, grab the SPK-specific version field.
Updates #cleanup.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Reimplement `downloadURLToFile` using `distsign.Download` and move all
of the progress reporting logic over there.
Updates #6995
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Helper command to verify package signatures, mainly for debugging.
Also fix a copy-paste mistake in error message in distsign.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adding a root key that signs the current signing key on
pkgs.tailscale.com. This key is here purely for development and should
be replaced before 1.50 release.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Now we have all the commands to generate the key hierarchy and verify
that signing keys were signed correctly:
```
$ ./tool/go run ./cmd/dist gen-key --priv-path root-priv.pem --pub-path root-pub.pem --root
wrote private key to root-priv.pem
wrote public key to root-pub.pem
$ ./tool/go run ./cmd/dist gen-key --priv-path signing-priv.pem --pub-path signing-pub.pem --signing
wrote private key to signing-priv.pem
wrote public key to signing-pub.pem
$ ./tool/go run ./cmd/dist sign-key --root-priv-path root-priv.pem --sign-pub-path signing-pub.pem
wrote signature to signature.bin
$ ./tool/go run ./cmd/dist verify-key-signature --root-pub-path root-pub.pem --sign-pub-path signing-pub.pem --sig-path signature.bin
signature ok
```
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
To make key management less error-prone, use different PEM block types
for root and signing keys. As a result, separate out most of the Go code
between root/signing keys too.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This library is intended for use during release to sign packages which
are then served from pkgs.tailscale.com.
The library is also then used by clients downloading packages for
`tailscale update` where OS package managers / app stores aren't used.
Updates https://github.com/tailscale/tailscale/issues/8760
Updates https://github.com/tailscale/tailscale/issues/6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The hardware version in `/proc/sys/kernel/syno_hw_version` does not map
exactly to versions in
https://github.com/SynoCommunity/spksrc/wiki/Synology-and-SynoCommunity-Package-Architectures.
It contains some slightly different version formats.
Instead, `/etc/synoinfo.conf` exists and contains a `unique` line with
the CPU architecture encoded. Parse that out and filter through the list
of architectures that we have SPKs for.
Tested on DS218 and DS413j.
Updates #8927
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* clientupdate: return NOTREACHED for macsys
The work is done in Swift; this is now a documentation placeholder.
Updates #6995
Signed-off-by: Chris Palmer <cpalmer@tailscale.com>
Implement naive update for Synology packages, using latest versions from
pkgs.tailscale.com. This is naive because we completely trust
pkgs.tailscale.com to give us a safe package. We should switch this to
some better signing mechanism later.
I've only tested this on one DS218 box, so all the CPU architecture
munging is purely based on docs.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Extract the self-update logic from cmd/tailscale/cli into a standalone
package that could be used from tailscaled later.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
