Added the net/speedtest package that contains code for starting up a
speedtest server and a client. The speedtest command for starting a
client takes in a duration for the speedtest as well as the host and
port of the speedtest server to connect to. The speedtest command for
starting a server takes in a host:port pair to listen on.
Signed-off-by: Aaditya Chaudhary <32117362+AadityaChaudhary@users.noreply.github.com>
Apparently this test was flaking because I critically misunderstood how
the kernel buffers UDP packets for senders. I'm trying to send more UDP
packets and will see if that helps.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This test used to try to run this only once, but this variant of the
test attempts to run `tailscale status` up to 6 times in a loop with
exponential backoff.
This fixes the flakiness found in previous instances of this test.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This adds some convenient defaults for -c, so that user-provided DERPs require less command line
flags.
Signed-off-by: julianknodt <julianknodt@gmail.com>
With netns handling localhost now, existing tests no longer
need special handling. The tests set up their connections to
localhost, and the connections work without fuss.
Remove the special handling for tests.
Also remove the hostinfo.TestCase support, since this was
the only use of it. It can be added back later if really
needed, but it would be better to try to make tests work
without special cases.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
netns_linux checked whether "ip rule" could run to determine
whether to use SO_MARK for network namespacing. However in
Linux environments which lack CAP_NET_ADMIN, such as various
container runtimes, the "ip rule" command succeeds but SO_MARK
fails due to lack of permission. SO_BINDTODEVICE would work in
these environments, but isn't tried.
In addition to running "ip rule" check directly whether SO_MARK
works or not. Among others, this allows Microsoft Azure App
Service and AWS App Runner to work.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Connections to a control server or log server on localhost,
used in a number of tests, are working right now because the
calls to SO_MARK in netns fail for non-root but then we ignore
the failure when running in tests.
Unfortunately that failure in SO_MARK also affects container
environments without CAP_NET_ADMIN, breaking Tailscale
connectivity. We're about to fix netns to recognize when SO_MARK
doesn't work and use SO_BINDTODEVICE instead. Doing so makes
tests fail, as their sockets now BINDTODEVICE of the default
route and cannot connect to localhost.
Add support to skip namespacing for localhost connections,
which Darwin and Windows already do. This is not conditional
on running within a test, if you tell tailscaled to connect
to localhost it will automatically use a non-namespaced
socket to do so.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Several other AWS services like App Run and Lightsail Containers
appear to be layers atop Fargate, to the point that we cannot easily
tell them apart from within the container. Contacting the metadata
service would distinguish them, but doing that from inside tailscaled
seems uncalled for. Just report them as Fargate.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Treat automated tests as their own, unique environment
rather than the type of container they are running in.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The localapi was double-unescaping: once by net/http populating
the URL, and once by ourselves later. We need to start with the raw
escaped URL if we're doing it ourselves.
Started to write a test but it got invasive. Will have to add those
tests later in a commit that's not being cherry-picked to a release
branch.
Fixes#2288
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
logBufWriter had no serialization.
It just so happens that none of its users currently ever log concurrently.
Make it safe for concurrent use.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Regression from 6d10655dc3, which added
UpdatePrefs but didn't write it out to disk.
I'd planned on adding tests to state_test.go which is why I'd earlier
added 46896a9311 to prepare for making
such persistence tests easier to write, but turns out state_test.go
didn't even test UpdatePrefs, so I'm staying out of there.
Instead, this is tested using integration tests.
Fixes#2321
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
As Brad suggested, mem.RO allows for a lot of easy perf gains. There were also some smaller
changes outside of mem.RO, such as using hex.Decode instead of hex.DecodeString.
```
name old time/op new time/op delta
FromUAPI-8 14.7µs ± 3% 12.3µs ± 4% -16.58% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
FromUAPI-8 9.52kB ± 0% 7.04kB ± 0% -26.05% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
FromUAPI-8 77.0 ± 0% 29.0 ± 0% -62.34% (p=0.008 n=5+5)
```
Signed-off-by: julianknodt <julianknodt@gmail.com>
Adds a benchmark for FromUAPI in wgcfg.
It appears that it's not actually that slow, the main allocations are from the scanner and new
config.
Updates #1912.
Signed-off-by: julianknodt <julianknodt@gmail.com>
My spatial memory functions poorly with large files and the vms_test.go
file recently surpassed the point where it functions adequately. This
patch splits up vms_test.go into more files to make my spatial memory
function like I need it to.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Split from https://github.com/tailscale/tailscale/pull/2376.
This adds IPv6 support to testcontrol so each member of the tailscale
network gets an IPv6 address too.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
It was once believed that it might be useful. It wasn't. We never used it.
Remove it so we don't slowly leak memory.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In theory, some of the other table-driven tests could be moved into this
form now but I didn't want to disturb too much good test code.
Includes a commented-out test for #2384 that is currently failing.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
The DERPTestPort int meant two things before: which port to use, and
whether to disable TLS verification. Users would like to set the port
without disabling TLS, so break it into two options.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid the generated nixos disk images from becoming immune from the
GC, I delete the symlink to the nix store at the end of tests.
`t.Cleanup` runs at the end of a test. I changed this part of the code
to have a separate timer for how long it takes to run NixOS builds, but
I did that by using a subtest. This means that it was creating the NixOS
image, deleting its symlink and then trying to use that symlink to find
the resulting disk image, making the whole thing ineffectual.
This was a mistake. I am reverting this change made in
https://github.com/tailscale/tailscale/pull/2360 to remove this layer of
subtesting.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This allows the test to be run inside a mounted filesystem,
which I'm doing now as a I develop on a linux VM.
Fixes#2367.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This tests incoming and outgoing UDP traffic. It would test incoming UDP
traffic however our socks server doesn't seem to allow for connecting to
destinations over UDP. When the socks server gets that support the
incoming test should pass without issue.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This adapts the existing in-process logcatcher from tstest/integration
into a public type and uses it on the side of testcontrol. This also
fixes a bug in the Alpine Linux OpenRC unit that makes every value in
`/etc/default/tailscaled` exported into tailscaled's environment, a-la
systemd [Service].EnviromentFile.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
