* cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy.
If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s).
In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true
and the node is Kubernetes operator ingress proxy configured via Ingress,
make sure that traffic from within the cluster can be proxied to the ingress target.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Advertise DNS discovered addresses as a single preference update rather
than one at a time.
Sort the list of observed addresses and use binary search to consult the
list.
Updates tailscale/corp#16636
Signed-off-by: James Tucker <james@tailscale.com>
views.Slice are meant to be immutable, and if used as such it
is at times desirable to use them as a key in a map. For non-viewed
slices it was kinda doable by creating a custom key struct but views.Slice
didn't allow for the same so add a method to create that struct here.
Updates tailscale/corp#17122
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Providing a hash.Block512 is an implementation detail of how deephash
works today, but providing an opaque type with mostly equivalent API
(i.e., HashUint8, HashBytes, etc. methods) is still sensible.
Thus, define a public Hasher type that exposes exactly the API
that an implementation of SelfHasher would want to call.
This gives us freedom to change the hashing algorithm of deephash
at some point in the future.
Also, this type is likely going to be called by types that are
going to memoize their own hash results, we additionally add
a HashSum method to simplify this use case.
Add documentation to SelfHasher on how a type might implement it.
Updates: corp#16409
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If an app connector is also configured as an exit node, it should still
advertise discovered routes that are not covered by advertised routes,
excluding the exit node routes.
Updates tailscale/corp#16928
Signed-off-by: James Tucker <james@tailscale.com>
If any domain along a CNAME chain matches any of the routed domains, add
routes for the discovered domains.
Fixestailscale/corp#16928
Signed-off-by: James Tucker <james@tailscale.com>
The API on the DNS record parser is slightly subtle and requires
explicit handling of unhandled records. Failure to advance previously
resulted in an infinite loop in the pretty responder for any reply that
contains a record other than A/AAAA/TXT.
Updates tailscale/corp#16928
Signed-off-by: James Tucker <james@tailscale.com>
When reporting ssh host keys to control, log a warning
if we're unable to get the SSH host keys.
Updates tailscale/escalations#21
Signed-off-by: Percy Wegmann <percy@tailscale.com>
gitops-pusher supports authenticating with an API key or OAuth
credentials (added in #7393). You shouldn't ever use both of those
together, so we error if both are set.
In tailscale/gitops-acl-action#24, OAuth support is being added to the
GitHub action. In that environment, both the TS_API_KEY and OAuth
variables will be set, even if they are empty values. This causes an
error in gitops-pusher which expects only one to be set.
Update gitops-pusher to check that only one set of environment variables
are non-empty, rather than just checking if they are set.
Updates #7393
Signed-off-by: Will Norris <will@tailscale.com>
When running as non-root non-operator user, you get this error:
```
$ tailscale serve 8080
Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
It should fail, but the error message is confusing.
With this fix:
```
$ tailscale serve 8080
sending serve config: Access denied: serve config denied
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
expvarx.SafeFunc wraps an expvar.Func with a time limit. On reaching the
time limit, calls to Value return nil, and no new concurrent calls to
the underlying expvar.Func will be started until the call completes.
Updates tailscale/corp#16999
Signed-off-by: James Tucker <james@tailscale.com>
These are functionally the same as the "urn:schemas-upnp-org" services
with a few minor changes, and are still used by older devices. Support
them to improve our ability to obtain an external IP on such networks.
Updates #10911
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I05501fad9d6f0a3b8cf19fc95eee80e7d16cc2cf
Don't append a trailing slash to a request path
to the reverse proxy that matches the mount point exactly.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
If control advised the connector to advertise a route that had already
been discovered by DNS it would be incorrectly removed. Now those routes
are preserved.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
This change allows us to perform batch modification for new route
advertisements and route removals. Additionally, we now handle the case
where newly added routes are covered by existing ranges.
This change also introduces a new appctest package that contains some
shared functions used for testing.
Updates tailscale/corp#16833
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Do not provision resources for a tailscale Ingress that has no valid backends.
Updates tailscale/tailscale#10910
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This no longer results in a nil pointer exception when we get a valid
UPnP response with no supported clients.
Updates #10911
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6e3715a49a193ff5261013871ad7fff197a4d77e
The new 'toolchain' directive in go.mod can sometimes force
the use of an upstream toolchain against our wishes. Concurrently,
some of our dependencies have added the 'toolchain' directive, which
transitively adds it to our own go.mod. Force all uses of gocross to
ignore that directive and stick to our customized toolchain.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
We issue redirects in a few different places, it's time to have
a common helper to do target validation.
Updates tailscale/corp#16875
Signed-off-by: David Anderson <danderson@tailscale.com>
* VERSION.txt: this is v1.58.0
Signed-off-by: kari-ts <kari@tailscale.com>
* VERSION.txt: this is v1.59.0
---------
Signed-off-by: kari-ts <kari@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are
available at:
http://localhost:12345/debug/metrics
Updates #8210
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8
