The intention was always that files only get written to *.partial
files and renamed at the end once fully received, but somewhere in the
process that got lost in buffered mode and *.partial files were only
being used in direct receive mode. This fix prevents WaitingFiles
from returning files that are still being transferred.
Updates tailscale/corp#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If DeleteFile fails on Windows due to another process (anti-virus,
probably) having our file open, instead leave a marker file that the
file is logically deleted, and remove it from API calls and clean it
up lazily later.
Updates tailscale/corp#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was getting cleared on notify.
Document that authURL is cleared on notify and add a new field that
isn't, using the new field for the JSON status.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This used to not be necessary, because MagicDNS always did full proxying.
But with split DNS, we need to know which names to route to our resolver,
otherwise reverse lookups break.
This captures the entire CGNAT range, as well as our Tailscale ULA.
Signed-off-by: David Anderson <danderson@tailscale.com>
Otherwise, the existence of authoritative domains forces full
DNS proxying even when no other DNS config is present.
Signed-off-by: David Anderson <danderson@tailscale.com>
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.
Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".
Fixestailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Let caller (macOS) do it so Finder progress bar can be dismissed
without races.
Updates tailscale/corp#1575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It used to just store received files URL-escaped on disk, but that was
a half done lazy implementation, and pushed the burden to callers to
validate and write things to disk in an unescaped way.
Instead, do all the validation in the receive handler and only
accept filenames that are UTF-8 and in the intersection of valid
names that all platforms support.
Fixestailscale/corp#1594
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_. That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.
An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.
So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.
Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".
Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.
And update/add tests.
Fixes#1725
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).
Use []tailcfg.Endpoint instead of []string internally.
At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.
End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)
Updates tailscale/corp#1543
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This changes the behavior of "tailscale up".
Previously "tailscale up" always did a new Start and reset all the settings.
Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").
But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.
RELNOTE=tailscale up change
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some paths already didn't. And in the future I hope to shut all the
notify funcs down end-to-end when nothing is connected (as in the
common case in tailscaled). Then we can save some JSON encoding work.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.
Part of #953.
Signed-off-by: David Anderson <danderson@tailscale.com>
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.
Baby steps towards some CLI refactor work.
Updates tailscale/tailscale#1436
The common Linux start-up path (fallback file defined but not
existing) was missing the log print of initializing Prefs. The code
was too twisty. Simplify a bit.
Updates #1573
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.
Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.
Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).
Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.
In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".
Updates #1436
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were going to remove this in Tailscale 1.3 but forgot.
This means Tailscale 1.8 users won't be able to downgrade to Tailscale
1.0, but that's fine.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.
Fixes#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
IPv4 and IPv6 both work remotely, but IPv6 doesn't yet work from the
machine itself due to routing mysteries.
Untested yet on iOS, but previous prototype worked on iOS, so should
work the same.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
"public IP" is defined as an IP address configured on the exit node
itself that isn't in the list of forbidden ranges (RFC1918, CGNAT,
Tailscale).
Fixes#1522.
Signed-off-by: David Anderson <danderson@tailscale.com>
