The current node isn't in NetMap.Peers, so without this we would not
have fired this timer on self expiry.
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id57f96985397e372f9226802d63b42ff92c95093
On macOS (AppStore and macsys), we need to bind to ""/all-interfaces
due to the network sandbox. Ideally we would only bind to the
Tailscale interface, but macOS errors out if we try to
to listen on privileged ports binding only to a specific
interface.
We also implement the lc.Control hook, same as we do for
peerapi. It doesn't solve our problem but it's better that
we do and would likely be required when Apple gets around to
fixing per-interface priviliged port binding.
Fixes: #6364
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
They changed a type in their SDK which meant others using the AWS APIs
in their Go programs (with newer AWS modules in their caller go.mod)
and then depending on Tailscale (for e.g. tsnet) then couldn't compile
ipn/store/awsstore.
Thanks to @thisisaaronland for bringing this up.
Fixes#7019
Change-Id: I8d2919183dabd6045a96120bb52940a9bb27193b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change delays the first flush in the /watch-ipn-bus/ handler
until after the watcher has been successfully installed on the IPN
bus. It does this by adding a new onWatchAdded callback to
LocalBackend.WatchNotifications().
Without this, the endpoint returns a 200 almost immediatly, and
only then installs a watcher for IPN events. This means there's a
small window where events could be missed by clients after calling
WatchIPNBus().
Fixestailscale/corp#8594.
Signed-off-by: salman <salman@tailscale.com>
In order to be able to synthesize a new NetMap when a node expires, have
LocalBackend start a timer when receiving a new NetMap that fires
slightly after the next node expires. Additionally, move the logic that
updates expired nodes into LocalBackend so it runs on every netmap
(whether received from controlclient or self-triggered).
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I833390e16ad188983eac29eb34cc7574f555f2f3
Needed for clients that get information via the /v0/status LocalAPI
endpoint (e.g. to not offer expired exit nodes as options).
Updates tailscale/corp#8702
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
UI works remains, but data is there now.
Updates #4015
Change-Id: Ib91e94718b655ad60a63596e59468f3b3b102306
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Unsigned peers should not be allowed to generate Wake-on-Lan packets,
only access Funnel.
Updates #6934
Updates #7515
Updates #6475
Signed-off-by: James Tucker <james@tailscale.com>
For debugging #6423. This is easier than TS_DEBUG_MAP, as this means I
can pipe things into jq, etc.
Updates #6423
Change-Id: Ib3e7496b2eb3f47d4bed42e9b8045a441424b23c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes `tailscale debug watch-ipn` safe to use for troubleshooting
user issues, in addition to local debugging during development.
Signed-off-by: David Anderson <danderson@tailscale.com>
By default, `http.Transport` keeps idle connections open hoping to re-use them in the future. Combined with a separate transport per request in HTTP proxy this results in idle connection leak.
Fixes#6773
This ensures that we capture error returned by `Serve` and exit with a
non-zero exit code if it happens.
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Use multierr.Range to iterate through an error tree
instead of multiple invocations of errors.As.
This scales better as we add more Go error types to the switch.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Mainly motivated by wanting to know how much Taildrop is used, but
also useful when tracking down how many invalid requests are
generated.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Nodes which have both -advertise-exit-node and -exit-node in prefs
should continue have them until the next invocation of `tailscale up`.
Updates #3569.
Signed-off-by: salman <salman@tailscale.com>
Fixes#6400
open up GETs for localapi serve-config to allow read-only access to
ServeConfig
`tailscale status` will include "Funnel on" status when Funnel is
configured. Prints nothing if Funnel is not running.
Example:
$ tailscale status
<nodes redacted>
# Funnel on:
# - https://node-name.corp.ts.net
# - https://node-name.corp.ts.net:8443
# - tcp://node-name.corp.ts.net:10000
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
* Do not print the status at the end of a successful operation
* Ensure the key of the current node is actually trusted to make these changes
Signed-off-by: Tom DNetto <tom@tailscale.com>
This handles the case where the inner *os.PathError is wrapped in
another error type, and additionally will redact errors of type
*os.LinkError. Finally, add tests to verify that redaction works.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie83424ff6c85cdb29fb48b641330c495107aab7c
x/exp/slices now has ContainsFunc (golang/go#53983) so we can delete
our versions.
Change-Id: I5157a403bfc1b30e243bf31c8b611da25e995078
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For testing of Windows GUI client.
Updates #6480
Change-Id: I42f7526d95723e14bed7085fb759e371b43aa9da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Things are slightly less tangled now that we've migrated prefs to the
backend (and renamed the field to LegacyMigrationPrefs).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
To simplify clients getting the initial state when they subscribe.
Change-Id: I2490a5ab2411253717c74265a46a98012b80db82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If user's fn returned false and never canceled their ctx, we never
stopped the NotifyWatchEngineUpdates goroutine.
This was introduced recently (this cycle).
Change-Id: I3453966ac71e00727296ddd237ef845782f4e52e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were writing the error when getting the default interface before
setting the content type, so we'd get HTML treated as plain text.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The peerapi IPv6 listener has a nil listener.
But we didn't need the listener's address anyway, so don't
try to use it.
Change-Id: I8e8a1a895046d129a3683973e732d9bed82f3b02
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, `TAILSCALE_USE_WIP_CODE` was needed to hit a bunch of the TKA paths. With
this change:
- Enablement codepaths (NetworkLockInit) and initialization codepaths (tkaBootstrapFromGenesisLocked via tkaSyncIfNeeded)
require either the WIP envknob or CapabilityTailnetLockAlpha.
- Normal operation codepaths (tkaSyncIfNeeded, tkaFilterNetmapLocked) require TKA to be initialized, or either-or the
envknob / capability.
- Auxillary commands (ie: changing tka keys) require TKA to be initialized.
The end result is that it shouldn't be possible to initialize TKA (or subsequently use any of its features) without being
sent the capability or setting the envknob on tailscaled yourself.
I've also pulled out a bunch of unnecessary checks for CanSupportNetworkLock().
Signed-off-by: Tom DNetto <tom@tailscale.com>
We merge/dedupe profiles based on UserID and NodeID, however we were not accounting for ControlURLs.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
