Exclide GOARCHs including: mips, mips64, mips64le, mipsle, riscv64.
These archs are not supported by gvisor.dev/gvisor/pkg/hostarch.
Fixes: #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In order to improve our ability to understand the state of policies and
registry settings when troubleshooting, we enumerate all values in all subkeys.
x/sys/windows does not already offer this, so we need to call RegEnumValue
directly.
For now we're just logging this during startup, however in a future PR I plan to
also trigger this code during a bugreport. I also want to log more than just
registry.
Fixes#8141
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We have two other types of Sets here. Add the basic obvious one too.
Needed for a change elsewhere.
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed cmd/{cloner,viewer} didn't support structs with embedded
fields while working on a change in another repo. This adds support.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
This is an exact copy of the files misc/set/set{,_test}.go from
tailscale/corp@a5415daa9c, plus the
license headers.
For use in #7877
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I712d09c6d1a180c6633abe3acf8feb59b27e2866
This makes `omitempty` actually work, and saves bytes in each map response.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
A peer can have IsWireGuardOnly, which means it will not support DERP or
Disco, and it must have Endpoints filled in order to be usable.
In the present implementation only the first Endpoint will be used as
the bestAddr.
Updates tailscale/corp#10351
Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Adds NewGaugeFunc and NewCounterFunc (inspired by expvar.Func) which
change the current value to be reported by a function. This allows
some client metric values to be computed on-demand during uploading (at
most every 15 seconds), instead of being continuously updated.
clientmetric uploading had a bunch of micro-optimizations for memory
access (#3331) which are not possible with this approach. However, any
performance hit from function-based metrics is contained to those metrics
only, and we expect to have very few.
Also adds a DisableDeltas() option for client metrics, so that absolute
values are always reported. This makes server-side processing of some
metrics easier to reason about.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This adds the util/sysresources package, which currently only contains a
function to return the total memory size of the current system.
Then, we modify magicsock to scale the number of buffered DERP messages
based on the system's available memory, ensuring that we never use a
value lower than the previous constant of 32.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d
In addition to checking the total hostname length, validate characters used in each DNS label and label length.
Updates https://github.com/tailscale/corp/issues/10012
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This only adds the field, to be used in a future commit.
Updates tailscale/corp#8020
Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This package handles cases where we need to truncate human-readable text to fit
a length constraint without leaving "ragged" multi-byte rune fragments at the
end of the truncated value.
Change-Id: Id972135d1880485f41b1fedfb65c2b8cc012d416
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
Also add some basic tests for this implementation.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I307ebb6db91d0c172657befb276b38ccb638f828
This isn't currently supported due to missing support in upstream
dependencies, and also we don't use this package anywhere right now.
Just conditionally skip this for now.
Fixes#7268
Change-Id: Ie7389c2c0816b39b410c02a7276051a4c18b6450
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
This package is an initial implementation of something that can read
netfilter and iptables rules from the Linux kernel without needing to
shell out to an external utility; it speaks directly to the kernel using
syscalls and parses the data returned.
Currently this is read-only since it only knows how to parse a subset of
the available data.
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Change-Id: Iccadf5dcc081b73268d8ccf8884c24eb6a6f1ff5
Now that Go 1.20 is released, multierr.Error can implement
Unwrap() []error
Updates #7123
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic28c2579de6799801836c447afbca8cdcba732cf
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Goal: one way for users to update Tailscale, downgrade, switch tracks,
regardless of platform (Windows, most Linux distros, macOS, Synology).
This is a start.
Updates #755, etc
Change-Id: I23466da1ba41b45f0029ca79a17f5796c2eedd92
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Nodes that are expired, taking into account the time delta calculated
from MapResponse.ControlTime have the newly-added Expired boolean set.
For additional defense-in-depth, also replicate what control does and
clear the Endpoints and DERP fields, and additionally set the node key
to a bogus value.
Updates #6932
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia2bd6b56064416feee28aef5699ca7090940662a
Consider the following pattern:
err1 := foo()
err2 := bar()
err3 := baz()
return multierr.New(err1, err2, err3)
If err1, err2, and err3 are all nil, then multierr.New should not allocate.
Thus, modify the logic of New to count the number of distinct error values
and allocate the exactly needed slice. This also speeds up non-empty error
situation since repeatedly growing with append is slow.
Performance:
name old time/op new time/op delta
Empty-24 41.8ns ± 2% 6.4ns ± 1% -84.73% (p=0.000 n=10+10)
NonEmpty-24 120ns ± 3% 69ns ± 1% -42.01% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
Empty-24 64.0B ± 0% 0.0B -100.00% (p=0.000 n=10+10)
NonEmpty-24 168B ± 0% 88B ± 0% -47.62% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Empty-24 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
NonEmpty-24 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=10+10)
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Errors in Go are no longer viewed as a linear chain, but a tree.
See golang/go#53435.
Add a Range function that iterates through an error
in a pre-order, depth-first order.
This matches the iteration order of errors.As in Go 1.20.
This adds the logic (but currently commented out) for having
Error implement the multi-error version of Unwrap in Go 1.20.
It is commented out currently since it causes "go vet"
to complain about having the "wrong" signature.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I added util/winutil/LookupPseudoUser, which essentially consists of the bits
that I am in the process of adding to Go's standard library.
We check the provided SID for "S-1-5-x" where 17 <= x <= 20 (which are the
known pseudo-users) and then manually populate a os/user.User struct with
the correct information.
Fixes https://github.com/tailscale/tailscale/issues/869
Fixes https://github.com/tailscale/tailscale/issues/2894
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
