If the user has a "Taildrop" shared folder on startup and
the "tailscale" system user has read/write access to it,
then the user can "tailscale file cp" to their NAS.
Updates #2179 (would be fixes, but not super ideal/easy yet)
Change-Id: I68e59a99064b302abeb6d8cc84f7d2a09f764990
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And simplify, unexport some tsdial/netstack stuff in the the process.
Fixes#3475
Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This starts to refactor tsdial.Dialer's name resolution to have
different stages: in-memory MagicDNS vs system resolution. A future
change will plug in ExitDNS resolution.
This also plumbs a Dialer into netstack and unexports the dnsMap
internals.
And it removes some of the async AddNetworkMapCallback usage and
replaces it with synchronous updates of the Dialer's netmap
from LocalBackend, since the LocalBackend has the Dialer too.
Updates #3475
Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Without this, enabling an exit node immediately blackholes all traffic,
but doesn't correctly let it flow to the exit node until the next netmap
update.
Fixes#3447
Signed-off-by: David Anderson <danderson@tailscale.com>
In prep for moving stuff out of LocalBackend.
Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.
Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.
As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.
A number of steps remain, including but limited to:
* move a bunch more random dialing stuff
* make netstack-mode tailscaled be able to use exit node's DNS proxy,
teaching tsdial's resolver to use it when an exit node is in use.
Updates #1713
Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't be a DoH DNS server to peers unless the Tailnet admin has permitted
that peer autogroup:internet access.
Updates #1713
Change-Id: Iec69360d8e4d24d5187c26904b6a75c1dabc8979
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If IP forwarding is disabled globally, but enabled per-interface on all interfaces,
don't complain. If only some interfaces have forwarding enabled, warn that some
subnet routing/exit node traffic may not work.
Fixes#1586
Signed-off-by: David Anderson <danderson@tailscale.com>
We were missing an argument here.
Also, switch to %q, in case anything weird
is happening with these strings.
Updates tailscale/corp#461
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Fixes regression from 81cabf48ec which made
all map errors be sent to the frontend UI.
Fixes#3230
Change-Id: I7f142c801c7d15e268a24ddf901c3e6348b6729c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
At least until js/wasm starts using browser LocalStorage or something.
But for the foreseeable future, any login from a browser should
be considered ephemeral as the tab can close at any time and lose
the wireguard key, never to be seen again.
Updates #3157
Change-Id: I6c410d86dc7f9f233c3edd623313d9dee2085aac
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
iOS and Android no longer use these. They both now (as of today)
use the hostinfo.SetFoo setters instead.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Turns out the iOS client has been only sending the OS version it first
started at. This whole hostinfo-via-prefs mechanism was never a good idea.
Start removing it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes "tailscale cert" on Synology where the var directory is
typically like /volume2/@appdata/Tailscale, or any other tailscaled
user who specifies a non-standard state file location.
This is a interim fix on the way to #2932.
Fixes#2927
Updates #2932
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So if the control plane knows that something's broken about the node, it can
include problem(s) in MapResponse and "tailscale status" will show it.
(and GUIs in the future, as it's in ipnstate.Status/JSON)
This also bumps the MapRequest.Version, though it's not strictly
required. Doesn't hurt.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for other bug fixes & tests. It's hard to test when it was
intermingled into LocalBackend.authReconfig.
Now it's a pure function.
And rename variable 'uc' (user config?) to the since idiomatic
'prefs'.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently plumb full URLs for DNS resolvers from the control server
down to the client. But when we pass the values into the net/dns
package, we throw away any URL that isn't a bare IP. This commit
continues the plumbing, and gets the URL all the way to the built in
forwarder. (It stops before plumbing URLs into the OS configurations
that can handle them.)
For #2596
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
And add health check errors to ipnstate.Status (tailscale status --json).
Updates #2746
Updates #2775
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The number of packet filters can grow very large,
so this log entry can be very large.
We can get the packet filter server-side,
so reduce verbosity here to just the number of filters present.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The fact that Hash returns a [sha256.Size]byte leaks details about
the underlying hash implementation. This could very well be any other
hashing algorithm with a possible different block size.
Abstract this implementation detail away by declaring an opaque type
that is comparable. While we are changing the signature of UpdateHash,
rename it to just Update to reduce stutter (e.g., deephash.Update).
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
With this, I can now:
* install Tailscale
* stop the GUI
* net stop Tailscale
* net start Tailscale
* tailscale up --unattended
(where the middle three steps simulate what would happen on a Windows
Server Core machine without a GUI)
Fixes#2137
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Regression from 6d10655dc3, which added
UpdatePrefs but didn't write it out to disk.
I'd planned on adding tests to state_test.go which is why I'd earlier
added 46896a9311 to prepare for making
such persistence tests easier to write, but turns out state_test.go
didn't even test UpdatePrefs, so I'm staying out of there.
Instead, this is tested using integration tests.
Fixes#2321
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We can't access b.netMap without holding b.mu.
We already grabbed it earlier in the function with the lock held.
Introduced in Nov 2020 in 7ea809897d.
Discovered during stress testing.
Apparently it's a pretty rare?
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
We were crashing on in initPeerAPIListener when called from
authReconfig when b.netMap is nil. But authReconfig already returns
before the call to initPeerAPIListener when b.netMap is nil, but it
releases the b.mu mutex before calling initPeerAPIListener which
reacquires it and assumes it's still nil.
The only thing that can be setting it to nil is setNetMapLocked, which
is called by ResetForClientDisconnect, Logout/logout, or Start, all of
which can happen during an authReconfig.
So be more defensive.
Fixes#1996
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The resulting empty Prefs had AllowSingleHosts=false and
Routeall=false, so that on iOS if you did these steps:
- Login and leave running
- Terminate the frontend
- Restart the frontend (fast path restart, missing prefs)
- Set WantRunning=false
- Set WantRunning=true
...then you would have Tailscale running, but with no routes. You would
also accidentally disable the ExitNodeID/IP prefs (symptom: the current
exit node setting didn't appear in the UI), but since nothing
else worked either, you probably didn't notice.
The fix was easy enough. It turns out we already knew about the
problem, so this also fixes one of the BUG entries in state_test.
Fixes: #1918 (BUG-1) and some as-yet-unreported bugs with exit nodes.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Previously, there was no server round trip required to log out, so when
you asked ipnlocal to Logout(), it could clear the netmap immediately
and switch to NeedsLogin state.
In v1.8, we added a true Logout operation. ipn.Logout() would trigger
an async cc.StartLogout() and *also* immediately switch to NeedsLogin.
Unfortunately, some frontends would see NeedsLogin and immediately
trigger a new StartInteractiveLogin() operation, before the
controlclient auth state machine actually acted on the Logout command,
thus accidentally invalidating the entire logout operation, retaining
the netmap, and violating the user's expectations.
Instead, add a new LogoutFinished signal from controlclient
(paralleling LoginFinished) and, upon starting a logout, don't update
the ipn state machine until it's received.
Updates: #1918 (BUG-2)
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
On clean installs we didn't set use iptables, but during upgrades it
looks like we could use old prefs that directed us to go into the iptables
paths that might fail on Synology.
Updates #1995Fixestailscale/tailscale-synology#57 (I think)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This leads to a cleaner separation of intent vs. implementation
(Routes is now the only place specifying who handles DNS requests),
and allows for cleaner expression of a configuration that creates
MagicDNS records without serving them to the OS.
Signed-off-by: David Anderson <danderson@tailscale.com>
This code path is very tricky since it was originally designed for the
"re-authenticate to refresh my keys" use case, which didn't want to
lose the original session even if the refresh cycle failed. This is why
it acts differently from the Logout(); Login(); case.
Maybe that's too fancy, considering that it probably never quite worked
at all, for switching between users without logging out first. But it
works now.
This was more invasive than I hoped, but the necessary fixes actually
removed several other suspicious BUG: lines from state_test.go, so I'm
pretty confident this is a significant net improvement.
Fixestailscale/corp#1756.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
If the engine was shutting down from a previous session
(e.closing=true), it would return an error code when trying to get
status. In that case, ipnlocal would never unblock any callers that
were waiting on the status.
Not sure if this ever happened in real life, but I accidentally
triggered it while writing a test.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Yes, it printed, but that was an implementation detail for hashing.
And coming optimization will make it print even less.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Needed for the "up checker" to map back from exit node stable IDs (the
ipn.Prefs.ExitNodeID) back to an IP address in error messages.
But also previously requested so people can use it to then make API
calls. The upcoming "tailscale admin" subcommand will probably need it
too.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is needed because the original opts.Prefs field was at some point
subverted for use in frontend->backend state migration for backward
compatibility on some platforms. We still need that feature, but we
also need the feature of providing the full set of prefs from
`tailscale up`, *not* including overwriting the prefs.Persist keys, so
we can't use the original field from `tailscale up`.
`tailscale up` had attempted to compensate for that by doing SetPrefs()
before Start(), but that violates the ipn.Backend contract, which says
you should call Start() before anything else (that's why it's called
Start()). As a result, doing SetPrefs({ControlURL=...,
WantRunning=true}) would cause a connection to the *previous* control
server (because WantRunning=true), and then connect to the *new*
control server only after running Start().
This problem may have been avoided before, but only by pure luck.
It turned out to be relatively harmless since the connection to the old
control server was immediately closed and replaced anyway, but it
created a race condition that could have caused spurious notifications
or rejected keys if the server responded quickly.
As already covered by existing TODOs, a better fix would be to have
Start() get out of the business of state migration altogether. But
we're approaching a release so I want to make the minimum possible fix.
Fixes#1840.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This removes the NewLocalBackendWithClientGen constructor added in
b4d04a065f and instead adds
LocalBackend.SetControlClientGetterForTesting, mirroring
LocalBackend.SetHTTPTestClient. NewLocalBackendWithClientGen was
weird in being exported but taking an unexported type. This was noted
during code review:
https://github.com/tailscale/tailscale/pull/1818#discussion_r623155669
which ended in:
"I'll leave it for y'all to clean up if you find some way to do it elegantly."
This is more idiomatic.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Without this, macOS would fail to display its menu state correctly if you
started it while !WantRunning. It relies on the netmap in order to show
the logged-in username.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
There was logic that would make a "down" tailscale backend (ie.
!WantRunning) refuse to do any network activity. Unfortunately, this
makes the macOS and iOS UI unable to render correctly if they start
while !WantRunning.
Now that we have Prefs.LoggedOut, use that instead. So `tailscale down`
will still allow the controlclient to connect its authroutine, but
pause the maproutine. `tailscale logout` will entirely stop all
activity.
This new behaviour is not obviously correct; it's a bit annoying that
`tailsale down` doesn't terminate all activity like you might expect.
Maybe we should redesign the UI code to render differently when
disconnected, and then revert this change.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
EditPrefs should be just a wrapper around the action of changing prefs,
but someone had added a side effect of calling Login() sometimes. The
side effect happened *after* running the state machine, which would
sometimes result in us going into NeedsLogin immediately before calling
cc.Login().
This manifested as the macOS app not being able to Connect if you
launched it with LoggedOut=false and WantRunning=false. Trying to
Connect() would sent us to the NeedsLogin state instead.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
With this change, shared node names resolve correctly on split DNS-supporting
operating systems.
Fixestailscale/corp#1706
Signed-off-by: David Anderson <danderson@tailscale.com>
It was getting cleared on notify.
Document that authURL is cleared on notify and add a new field that
isn't, using the new field for the JSON status.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This used to not be necessary, because MagicDNS always did full proxying.
But with split DNS, we need to know which names to route to our resolver,
otherwise reverse lookups break.
This captures the entire CGNAT range, as well as our Tailscale ULA.
Signed-off-by: David Anderson <danderson@tailscale.com>
Otherwise, the existence of authoritative domains forces full
DNS proxying even when no other DNS config is present.
Signed-off-by: David Anderson <danderson@tailscale.com>
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.
Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".
Fixestailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_. That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.
An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.
So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.
Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".
Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.
And update/add tests.
Fixes#1725
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).
Use []tailcfg.Endpoint instead of []string internally.
At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.
End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)
Updates tailscale/corp#1543
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This changes the behavior of "tailscale up".
Previously "tailscale up" always did a new Start and reset all the settings.
Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").
But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.
RELNOTE=tailscale up change
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some paths already didn't. And in the future I hope to shut all the
notify funcs down end-to-end when nothing is connected (as in the
common case in tailscaled). Then we can save some JSON encoding work.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.
Part of #953.
Signed-off-by: David Anderson <danderson@tailscale.com>
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.
Baby steps towards some CLI refactor work.
Updates tailscale/tailscale#1436
The common Linux start-up path (fallback file defined but not
existing) was missing the log print of initializing Prefs. The code
was too twisty. Simplify a bit.
Updates #1573
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.
Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.
Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).
Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.
In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".
Updates #1436
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were going to remove this in Tailscale 1.3 but forgot.
This means Tailscale 1.8 users won't be able to downgrade to Tailscale
1.0, but that's fine.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.
Fixes#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
IPv4 and IPv6 both work remotely, but IPv6 doesn't yet work from the
machine itself due to routing mysteries.
Untested yet on iOS, but previous prototype worked on iOS, so should
work the same.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
"public IP" is defined as an IP address configured on the exit node
itself that isn't in the list of forbidden ranges (RFC1918, CGNAT,
Tailscale).
Fixes#1522.
Signed-off-by: David Anderson <danderson@tailscale.com>
And if we have over 10,000 CGNAT routes, just route the entire
CGNAT range. (for the hello test server)
Fixes#1450
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to e3df29d488, the Engine.SetLinkChangeCallback fired
immediately, even if there was no change. The ipnlocal code apparently
depended on that, and it broke integration tests (which live in
another repo). So mimic the old behavior and call the ipnlocal
callback immediately at init.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Gets it out of wgengine so the Engine isn't responsible for being a
callback registration hub for it.
This also removes the Engine.LinkChange method, as it's no longer
necessary. The monitor tells us about changes; it doesn't seem to
need any help. (Currently it was only used by Swift, but as of
14dc790137 we just do the same from Go)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
UIs need to see the full unedited netmap in order to know what exit nodes they
can offer to the user.
Signed-off-by: David Anderson <danderson@tailscale.com>
If no exit node is specified, the filter must still run to remove
offered default routes from all peers.
Signed-off-by: David Anderson <danderson@tailscale.com>
This one alone doesn't modify the global dependency map much
(depaware.txt if anything looks slightly worse), but it leave
controlclient as only containing NetworkMap:
bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go
backend.go: NetMap *controlclient.NetworkMap // new netmap received
fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
fake_test.go: b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
handle.go: netmapCache *controlclient.NetworkMap
handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap {
Once that goes into a leaf package, then ipn doesn't depend on
controlclient at all, and then the client gets smaller.
Updates #1278
And move a couple other types down into leafier packages.
Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc.
Fixes#1181
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
